Custom Bent Exhaust / Wild Time Fabrication
is your ROCKWELL CONNECTION PLUS
COME GET YOUR ROCKWELL AXLES AND PARTS from WildTime Fabrication
Owned and operated by my self since "94" Home Based shop that offers all exhaust repairs, truck lifts & accessories, and custom 4x4 fabrication Just north of Battle Creek about 8 miles (14865 North Ave Bellevue Mi 49021) PHONE # 269 758 3857
We also have or can get any Rockwell Parts you could need for your 2.5 & 5 ton axles, and the parts to put them in your truck or build a truck from the ground up.
[attachment deleted by admin]
Just added some new fabrication equipment to the shop. (YOUR FABRICATION JOB DOES NOT HAVE TO BE TRUCK RELATED)
( 5' x 10' CNC Plasma Table)
Now able to CNC CUT, wheel centers, four link brackets, shock tabs, mounting plates, gussets, flanges, ect. Almost anything out of flat steel that I can draw first in a cad program.
(55 Ton Iron Worker)
Now able to shear flat steel to 14" wide & 4x4 angle, Punch holes up to 1& 1/16" in up to 5/8 " plate, custom notching/coping, and
Press Brake (Bend) up to 5/16" x 12" material
( Thick Wall Tube Bender )
Now able to correctly bend DOM tubing in 1", 1.25", 1.5",1.75"and 2" sizes for any of your needs such as Bumpers, Shock Hoops,
Cages, Complete Frame, or any other application you can think of.
These services will be availible along with the everything we were already doing, So if there is ANYTHING you'd like for your truck,
AFTER MARKET OR CUSTOM BUILT CALL:
269 758 3857 or 269 317 4082
CustomBent Exhaust LLC / Wild Time Fabrication
Also now offering all maintenance and rebuild parts for 2.5 ton and 5 ton Rockwell Axles
Seals, Bearings, Gaskets, Axle Shafts, Ujoints, Any and All Parts.
Also Custom Rockwell parts
Pinion Brakes, Four Link Brackets, Weld on Lift Blocks, ect.
Military Truck Parts Available
Here are some inverted 4 link brackets for 2.5 ton Rockwell axles, CNC CUT from 3/8" plate ready to be finish drilled to size for your heims, and welded to the axle.
These will sell in sets Enough for both sides of one axle for 160.$ if you let me know what size you need the holes drilled to That can be done, for a fee, before they are shipped
"WildTime Fabrication" 269 317 4082
Other Brackets AVAILABLE or if ya need something special let me know
(http://i224.photobucket.com/albums/dd294/wildtyme/100_1339.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_1339.jpg)
(http://i224.photobucket.com/albums/dd294/wildtyme/100_1344.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_1344.jpg)
(http://i224.photobucket.com/albums/dd294/wildtyme/100_1340.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_1340.jpg)
These are weld on lift blocks for Rockwell Axles Many Hiegths and Angles Available. These are 6" with 8 degree angle
(http://i224.photobucket.com/albums/dd294/wildtyme/100_1350.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_1350.jpg)
(http://i224.photobucket.com/albums/dd294/wildtyme/100_1371.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_1371.jpg)
SCS T-Cases and Nitrogen Shocks Available by special Order ONLY
(http://i224.photobucket.com/albums/dd294/wildtyme/tcase.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/tcase.jpg)
(http://i224.photobucket.com/albums/dd294/wildtyme/shk.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/shk.jpg)
Wheel Centers CNC cut to your specs / (size)
This one is 1/2" plate 23&1/2" OD and fits 2.5ton Rockwell
(http://i224.photobucket.com/albums/dd294/wildtyme/100_1740.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_1740.jpg)
Check Out the EXO CAGE in projects Built by "WTF" for Slymer Thanks Slymer
(http://i224.photobucket.com/albums/dd294/wildtyme/100_1862.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_1862.jpg)
Rockwell Off Road Pinion Brakes
(http://i224.photobucket.com/albums/dd294/wildtyme/100_1926.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_1926.jpg)
(http://i224.photobucket.com/albums/dd294/wildtyme/100_1959.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_1959.jpg)
Patterns cut into wheel centers available upon request
P.S. call "WTF" for the best price around
269 317 4082
How much would you charge to put 8 lug centers in a 6 lug rim? With and without centers. huntermrh@charter.net
Hunter call 269 317 4082
Just put up a new site with some parts, prices, & pics check it out http://wildtimefabrication.com/index.html
adding link now on links pg
Quote from: wildtime on May 06, 2009, 09:23:01 PM
Just put up a new site with some parts, prices, & pics check it out http://wildtimefabrication.com/index.html
Thanks for the support
New parts and new apparel at wildtimefabrication.com
brought my rocks and suspension stuff and just got my exhaust done.. great parts, great work, great prices!!!
once the my Nova is done....ill be getting a hold of you for my new "secret " project. heres a ==bump in the mean time.
SH!T Yea secret projects are always welcome
thanks for adding my truck to ur website dave ill get you some new pics tomarrow ==wgm ;D
"WTF" has a brand new industrial CNC Plasma Table on the way, should be in the shop monday morning 7/19/2010 I can't wait. The old table was hit by lighting last month.
5x10 TorchMate Water Bed Cutting Table Plasma (OR) Oxy Fuel anything thicker than 1" is cut with Oxy/Fuel (torch) can cut 3" if needed, haven't used the Oxy fuel yet!!!LOL
(http://i224.photobucket.com/albums/dd294/wildtyme/100_3081.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_3081.jpg)
dave did my exhaust on my HD, and i just picked up some rockwell parts, great guy to deal with.
Just IN!!!!! "WTF" now has 2.5 inch bender dies for DOM tubing. Hope to get some work for these, LOL, just the die set was 880$
Able to bend 1, 1.25, 1.50, 1.75, 2, 2.5 inch DOM Tubing and 1.5, 1.75, 2, 2.25, 2.50, 3 inch exhaust tubing.
Winter is here and truck building is comin out of the wood work!!! Still have time to get your truck or parts ready for the spring boggs.
Give me a call @ 269 758 3857
how much to have a cage put in a 88 wrangler
hey can you make kits for beadlock wheels with ur plasma table??
Good price. Just about ready to get with ya to drop it off.
Yes on the beed lock rings and when yur ready nasty
WTF gusset left & right 5$ each
(http://i224.photobucket.com/albums/dd294/wildtyme/100_3566.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_3566.jpg)
Quote from: wildtime on February 23, 2011, 02:25:00 AM
WTF gusset left & right 5$ each
(http://i224.photobucket.com/albums/dd294/wildtyme/100_3566.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_3566.jpg)
wat are thes for?? they look badass
90 degree fabricators corner gussets
Can you do tube fenders for a 92 Jeep cherokee also tube doors and how much would they be?
Tube fenders and doors can do!!!
would you be able to build this dave? dont have exact measurements on it but i know your damn smart. it would be going on a 94 k1500 4x4 pickup
sure can I'll have to do some math after getting measurement to give ya a price
NOW is a great time to get your rockwells, 11/11 &12/11 when you purchase a pair of rocks you will get 200$ credit toward other parts from WTF. can use the 200$ toward Heims, Shocks, Rims, Centers, Brackets, ect.
So CALL 269 758 3857 TODAY and get the parts you need to be ready for next spring
Dave can you build this thing cheaper then their selling it??
http://www.offroaddirect.com/88-98-Chevy-solid-axle-conversion-front-hanger_p_62.html (http://www.offroaddirect.com/88-98-Chevy-solid-axle-conversion-front-hanger_p_62.html)
How bout a price for a set of tube fenders and a cage for a 93 YJ?
Quote from: OHEARN.2012 on January 03, 2012, 02:39:52 PM
Dave can you build this thing cheaper then their selling it??
http://www.offroaddirect.com/88-98-Chevy-solid-axle-conversion-front-hanger_p_62.html (http://www.offroaddirect.com/88-98-Chevy-solid-axle-conversion-front-hanger_p_62.html)
Wondering the same thing here.
sure can the crossmember would be 125. also can make the shackle mnts and shackle for the rear of frt springs for 200$ shock hoops ect. tube fenders depend on amount of flare & start at 350, cage depends on what your lookin for but complete frt to rear with frame tie ins, would be around 900$
you got any pics of current shackle mounts? i need some of them too
No, sorry I have not cut these yet, I do have the drawings done. And will look basiccally the same as most others. (like on your link) I have been asked about these for a while now, and have just not gotten to them. I will try to have some pics soon, it'd prob be sooner if I had an order for them LOL cause then I'd be under the gun to get them done. LOL I post pics as soon as I can.
Thanks Dave
ill order some from ya just need to accumulate parts rather help out you then a random company off the internet
Thanks Man ! I will work on it asap !! I'll be in touch
Quote from: OHEARN.2012 on June 22, 2011, 04:35:52 AM
would you be able to build this dave? dont have exact measurements on it but i know your damn smart. it would be going on a 94 k1500 4x4 pickup
What was the price to build this?? im interested.
approx how much for a roll cage for a single cab chevy run? and true dual exhaust bein single cab stepside headers all the way back?
Quote from: drew454u on February 03, 2012, 10:32:42 AM
Quote from: OHEARN.2012 on June 22, 2011, 04:35:52 AM
would you be able to build this dave? dont have exact measurements on it but i know your damn smart. it would be going on a 94 k1500 4x4 pickup
What was the price to build this?? im interested.
for the whole kit plus leaf spring pplates its like almost 400
Quote from: OHEARN.2012 on February 03, 2012, 03:31:06 PM
Quote from: drew454u on February 03, 2012, 10:32:42 AM
Quote from: OHEARN.2012 on June 22, 2011, 04:35:52 AM
would you be able to build this dave? dont have exact measurements on it but i know your damn smart. it would be going on a 94 k1500 4x4 pickup
What was the price to build this?? im interested.
for the whole kit plus leaf spring pplates its like almost 400
you know thats really not to bad. i wouldnt need the spring perches either, aftermarket bumpers are crazy prices and i like this better. anyways.
how much would it be for a full seal kit for both a front and rear 2.5 rockwell axle? ??? also how much would it be from a bed roll bar made of 3'' tubing for a 84 long box, single/single?
PM sent on the rock parts
"WTF" is now offering performance transmissions specialising in Power Glide and TH400 GM & Ford App.
ttt