Print Page - which intake to go with

Title: which intake to go with
Post by: chevystudz7105 on August 09, 2008, 06:18:59 PM

i just picked up a new motor for my muddin truck. the intake it has on there is a weiand sp? now the motor that is in my muddin truck right now that will be coming out soon has a edelbrock performer intake on it. is one better then the other or wont i notice a diff? i know some of the ford guys or atleast the ones i know like the weiand intakes on their motors but i was curious what all the chevy guys think.

oh and the motor is a 350.

Title: Re: which intake to go with
Post by: RIP_K52007 on August 09, 2008, 08:43:16 PM

id go with the performer just because it has the universal bolt pattern for the carb.

Title: Re: which intake to go with
Post by: Mudbuster on August 09, 2008, 09:03:31 PM

I've run both on my SBC's and I don't think there's much of a difference, they are both duel plane intakes

Title: Re: which intake to go with
Post by: Eroq on August 10, 2008, 01:19:46 AM

==dn tell us about the weiland and the edeljunk...

single plane? dual plane? airgap? ??? ??? ???

i've got a Holley Strip Dominator single plane and i LOVE IT

Title: Re: which intake to go with
Post by: mudboggincrazy on August 10, 2008, 01:41:03 AM

ID TRY IT WITH THE WEILEND FIRST TO SEE IF YOU LIKE IT . IF I HAD TO CHOSE ID RUN THE WEILAND BUT ITS YOUR TRUCK JUST MY 2 CENTS

Title: Re: which intake to go with
Post by: chevystudz7105 on August 10, 2008, 04:26:01 AM

to tell you the truth i duno what it is yet i havent pulled the carb off the intake to see but i will be doing that tomorrow.

Title: Re: which intake to go with
Post by: PathWayMan on August 10, 2008, 04:31:02 AM

Id say VICTOR JR. ==np but thats my belief lol try both one one bogg and the other another

Title: Re: which intake to go with
Post by: Eroq on August 11, 2008, 03:27:18 AM

Quote from: toughbowtietruck on August 10, 2008, 02:52:18 AM
dual plane is EXTREMELY important in an off road engine....

...... why?

Title: Re: which intake to go with
Post by: Ranger Dave on August 11, 2008, 04:48:58 AM

dual plane Intakes are TORK, single ones are RPM.

i say a small block go with a Single, big block go for tork.
just my ==2cents

Title: Re: which intake to go with
Post by: DirtyChevy on August 11, 2008, 12:42:26 PM

Quote from: Ranger Dave on August 11, 2008, 04:48:58 AM
dual plane Intakes are TORK, single ones are RPM.

i say a small block go with a Single, big block go for tork.
just my ==2cents

Title: Re: which intake to go with
Post by: betterbeaters on August 11, 2008, 01:17:18 PM

sinlge plan victor jr. here and love it! but run what its got for now! see how it does but intakes are good~

Title: Re: which intake to go with
Post by: chevystudz7105 on August 11, 2008, 10:05:11 PM

yea im not going to buy another intake. i got one motor with the peformer on it and the other with a weiand. i was just wondering if one works better then the other.

Title: Re: which intake to go with
Post by: MR. Horsepower on August 12, 2008, 01:22:32 AM

I run an edelbrock performer RPM on my stroker windsor highrise dual plane seams to work good

Title: Re: which intake to go with
Post by: JeepinJohn on August 12, 2008, 02:46:51 AM

i run ,edel. performer on mine.

Title: Re: which intake to go with
Post by: chevystudz7105 on August 13, 2008, 01:46:14 AM

yea i duno what im gunna do but i have atleast 2 wks to think about it. i was messing around with the motor tonite and as i was putting it back in the garage i was holding onto the bar that rotates the engine stand . well iw as pushing it in with that bar and it slipped on me pinching me hand and slicing it open. right between the thumb and index finger. so i got a bunch of stitches and 2wks of not working on the truck. not to mention trying to get this typing deal down again with one screwed up hand lol

WeGotMud

Projects & Parts => Garage/Tech => Topic started by: chevystudz7105 on August 09, 2008, 06:18:59 PM