Went and did a little wheel'in and deal'in and brought this home. Got it from riverrat. 305 marine motor, cam, headers,, edelbrock intake and carb, Th350, NP205, 14 bolt, 10 bolt, 4:10's, 38.5x14.5x15 Swampers. I put a stock hood back on it and have to do some finishing. I will update when I get it done.
looks sweet!!!
nice truck
sweet truck!
full size frame?
Nice ride! Love them S-10 boggers.
looks awsome...i actually like the HUGE cowl hood personaly but to each his own...
Nice Ride ==np applaudd
Quote from: 2trackr on February 13, 2009, 06:38:36 PM
looks awsome...i actually like the HUGE cowl hood personaly but to each his own...
I like the cowl too but you can't see with it. It is on a 1982 3/4 ton full size frame. Need a fuel cell, a painless kit, tach, gauges, and a few finishing touches and it's bogg'in.
Rear driveshaft was cut and will be put on tomorrow pending the weather. The interior still leaves something to be desired but I am also putting a clutch in a Jeep I got from Swampthing so the going is a little slow right now. More updates to follow. Anyone got a cheap fuel cell??
town and country has a couple out there in scrapped race cars go check them out
nice truck chris cant wait to blow ur doors off
==cl
this is a nice fawkin truck chris.......id rather have this that ur bug truck...lol....u got any quads or 3 wheelers u wanta get rid of?
Quote from: garrett jerry on February 18, 2009, 01:14:16 PM
nice truck chris cant wait to blow ur doors off
I'm content with my little boat motor in it. It's in my Driveway stop over and look at it. Go to the stop light in town and look towards Frank's. I live right next to it.
will do
Quote from: ChevyRacer1981 on February 18, 2009, 05:01:55 PM
Quote from: garrett jerry on February 18, 2009, 01:14:16 PM
nice truck chris cant wait to blow ur doors off
I' content with my little boat motor in it. It' in my Driveway stop over and look at it. Go to the stop light in town and look towards Frank'. I live right next to it.
lol your 10min away. looks killer now get some dueces under it!!
[/quote] lol your 10min away. looks killer now get some dueces under it!!
[/quote]
I got 53's already, with no rims, but dueces are a bit much for the pocket book right now. On the other hand if someone wanted to donate to the cause I wouldn't turn them down. LOL
BONER!!! BOOOOOOOOOOINGGGGGGGGGG SAWEET TRUCK IDE ROCK IT PROLLY WASH IT EVERY DAY AND KISS IT GOOD NITE ALSO
nice truck!
thats a sweet truck! i bet it rips in the mud
Project Twitchy got it's tires wet for the first time at Gladwin. Thanks a lot guys for a great bog again.
nice toy i saw that when it was at bobs cool trade
yeah if Bob still had it, it still would not be done. LOL
nice truck, and what are you going to do with that cowl hood?
Bob still has it. It's a home made one I'll see what he's doing with it if your intersted.
yea, if you would see what he's doing with it. it would look great on my s10 thanks.
Twitchy got her feet wet at Gladwin and a local bog and now needs a timing chain. Hopefully ordering parts this weekend. Photobucket has a few pictures of the aftermath of Gladwin and I was on the front of the Midland news paper but it wasn't the greatest picture.
Well it wasn't a timing chain. I bent a few. all 8 exhaust, valves somehow and got the heads changed already. Twitchy is getting some upgrades: Mallory Comp 9000 Distributor, Mallory Promaster Coil, and Mallory Hyfire 6AL box.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/100_0431.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/100_0431.jpg)
sweet
Well the upgrades worked great but had a few other issues......see pictures
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0558.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0558.jpg)
just an fyi i think you blew/broke somthing.......just a guess loll that sux!
pulling the 305 and putting in a stock 350 with a cam for now. I want to pull the 355 out of the old truck and freshen it up then go from there.
that doesn't look so go i think you broke it
2 motors suckin water in under a year.....lol if it looks deep it is.
Quote from: Flat_Black on July 07, 2009, 03:20:33 AM
2 motors suckin water in under a year.....lol if it looks deep it is.
Note to self if the hole has a nickname that has the word "POND" in it stay out of it. the "Frog Pond" did it this time.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0540.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0540.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0539.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0539.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0545.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0545.jpg)
u made it most of the wat wtf happend......need to run a snorkle or somthin
Quote from: ChevyRacer1981 on July 07, 2009, 03:26:12 AM
Quote from: Flat_Black on July 07, 2009, 03:20:33 AM
2 motors suckin water in under a year.....lol if it looks deep it is.
Note to self if the hole has a nickname that has the word "POND" in it stay out of it. the "Frog Pond" did it this time.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0540.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0540.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0539.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0539.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0545.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0545.jpg)
where is that little pit at?
motor got splashed pretty good and it didn't help that the VACUUM LINE to the trans was off under water running. I hit the whole 3 times and backed up twice with the line sucking the whole time. Also the motor sits low in my truck compared to the body.
That hole is located on the Thumb Area Mud Runners Club property.
also that 4 wheeler didn't make it either lol see video
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/th_101_0547.jpg) (http://s471.photobucket.com/albums/rr80/ChevyRacer1981/?action=view¤t=101_0547.flv)
Quote from: ChevyRacer1981 on July 08, 2009, 11:12:47 PM
also that 4 wheeler didn't make it either lol see video
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/th_101_0547.jpg) (http://s471.photobucket.com/albums/rr80/ChevyRacer1981/?action=view¤t=101_0547.flv)
Nice pics. and vid. I was going to stop by that day after I talked to Sherman, but we had too many grad. open houses to get to. Dang it!
Sherman made it through which is why I tried it. He has a spooled rear and more motor and boggers. silly me LOL.
nice truck sucks about the motor
Picked up a cheap Big Block and after a little bit of fighting it made it's way into it's new home "TWITCHY"
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0695.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0695.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0696.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0696.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0697.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0697.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0700.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0700.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0703.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0703.jpg)
common get the suckers goin....geez
More pictures
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0701-1.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0701-1.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0719.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0719.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0721.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0721.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0722.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/101_0722.jpg)
its looking good, and that motor looks nice sitting in that truck, a little tight though, lol and thanks for the parts
Quote from: 73chevytruck on September 11, 2009, 04:25:32 AM
its looking good, and that motor looks nice sitting in that truck, a little tight though, lol and thanks for the parts
No problem. Always helping Got Mudders out as I can.
Big block was fired and running today. ask Flat Black LOL. Got to get the alternator and power steering and work out the throttle linkage with the Predator carb and I'm in there. Ready for Thompsons.....I think so.
i thought that was a chain saw......lmao
Quote from: Flat_Black on September 19, 2009, 01:22:20 AM
i thought that was a chain saw......lmao
I would love to see a Big Block chain saw. I think 1 was made somewhere???? It will sound better if the timing was better and all the sparkplug wires were on. 1 was off when I was running it LOL
my big block would run with all the spark plug wires off side, not good but it would, lol
rite on!! you'll love that bigblock power!! hope to see it at Thompsons!!! you gotta try those cat tails again,lol
Quote from: Orangecrush on September 20, 2009, 08:50:19 AM
rite on!! you'll love that bigblock power!! hope to see it at Thompsons!!! you gotta try those cat tails again,lol
I'll hit them again what the hell.........got some work to do yet but I should be there with it.
well since you got it runnin again lets not take out a 3rd motor. lets have a flash back to the first trash pump (http://img.photobucket.com/albums/v80/rebel_ram84/mounds/th_100_9036.jpg) (http://smg.photobucket.com/albums/v80/rebel_ram84/mounds/?action=view¤t=100_9036.flv) lmao just for old times
Quote from: ChevyRacer1981 on September 19, 2009, 02:37:02 AM
Quote from: Flat_Black on September 19, 2009, 01:22:20 AM
i thought that was a chain saw......lmao
I would love to see a Big Block chain saw. I think 1 was made somewhere???? It will sound better if the timing was better and all the sparkplug wires were on. 1 was off when I was running it LOL
http://www.youtube.com/watch?v=E9x8rBKC4BE&feature=related
Now thats a Chainsaw. I wouldn't mind my truck sounding like that.
Took it to Thompsons ran here and tehre but had issues. Took it to Delany and ran like a beast minus the box lost a mount and was floppy and I ran out of gas LOL and broke a u-joint on the front driveshaft. Getting all the bugs worked out of it. But up and running good.
Getting ready to tear it down for the winter. Moving the radiator to the back with a couple electric fans, enclose the engine bay better and keep some of the mud off the motor, oil change, and it should be ready for next season. Want to get the interior fixed up better also. Add some sort of a dash and put my gauges in it. Will get pics up as I work on it. Also picked up a set or 44x18.5x15 Gumbo mudders that I am going try running next year.
u better find a 60 front. lmao
going BB your going to like it ;D
should be sweet on the 44's
Nice Truck ==kp ==kp ==kp applaudd applaudd
Actually had it running today and broke the belt on it. LOL Added a little more anti freeze for the winter and looking forward to the spring.
nice truck!big blocks and s-10's rock!!!
Quote from: pitbull35 on January 22, 2010, 03:03:01 PM
nice truck!big blocks and s-10's rock!!!
Thanks. Had it running yesterday and let me tell you a Mallory box and promaster coil gives a pretty good jolt. LOL I found a bad plug wire. LOL
More upgrades. Picked up a Dana 60 front the other day. Needs some parts to make it 100% but hopeing to have it in and ready to go before the season is done.
well damn money bags, you get one for me to, ;D ==roll
Quote from: 73chevytruck on March 08, 2010, 04:48:58 AM
well damn money bags, you get one for me to, ;D ==roll
lol he got a smokin deal on it. ;)
git r done!
Quote from: Flat_Black on March 08, 2010, 04:54:01 AM
Quote from: 73chevytruck on March 08, 2010, 04:48:58 AM
well damn money bags, you get one for me to, ;D ==roll
lol he got a smokin deal on it. ;)
more like a " What you smok"in?" deal LOL Thanks again.
Quote from: ChevyRacer1981 on March 08, 2010, 04:59:15 AM
Quote from: Flat_Black on March 08, 2010, 04:54:01 AM
Quote from: 73chevytruck on March 08, 2010, 04:48:58 AM
well damn money bags, you get one for me to, ;D ==roll
lol he got a smokin deal on it. ;)
more like a " What you smok"in?" deal LOL Thanks again.
if ya dont need it ill take it back no biggie im sure i can use it on the waggy.
SACK SLAP!!!!! that is all
Dam it. No sack slap. Need to get some more parts and run it.
very sweet deal dude :)
Well got rid of the 44's for something a little better on tread. Got 2 39.5 boggers for the rear and 2 40" gumbos for the front this year. Should be throwing shovel fulls. LOL
sweet chris, should be a good setup for you
nice..you'll like havin that marine motor its built to run high rpm for long periods of time cus boats only have 1 gear.
Well took it to Gladwin and had a good time. Alternator went so I ran and got another one from the local parts store. Was back in action and tearing up everything. Shortly after I broke the trans in 2 or more pieces. The rear part of the case is broke and it won't move. Dam it. New rebuild trans is in the future hopefully soon.
Well picked up another trans and got it back in the truck ready to go. Working on getting the radiator mounted in the back and all the coolant pipes ran to the back. Picked up a 4 core aluminum 31"x19" and a permacool aluminum blade electric fan. Rewire a few things and I'll be back in the saddle again. Hopefully.
whats the hold up, my truck up and running lol. ;D
nice lookin truck love the hood scoop
radiator is in and plumbed. Working on putting some sheet metal in the back to protect it. Got to hook up the trans cooler and fab up some new headers since I didn't like the old ones. Hopeing to be able to go straight through the hood wth them.
very nice....keep up the great build!!!
Some of the tin work done. Got more done today but ran out of wire and forgot the camera.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0983.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0983.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0984.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0984.jpg)
looking good chris, what all you have left to do?
Quote from: 73chevytruck on July 22, 2010, 01:52:10 AM
looking good chris, what all you have left to do?
Custom fab new headers for it and run the trans lines and put on the trans cooler and front drive shaft. O yeah and the torque converter bolts.
i got my torque converter bolts at autozone when i got them, like 8 bucks and they had them in stock.
make your self some up rights, lol
Quote from: 73chevytruck on July 22, 2010, 02:24:12 AM
i got my torque converter bolts at autozone when i got them, like 8 bucks and they had them in stock.
make your self some up rights, lol
Gonna try for some uprights but I have to Custom fab them with the steering where it is. Not having the radiator up front anymore made more room so I think I can get away with it.
didn't go upright with the headers but they are made and look a lot better than the other ones I made.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0994.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0994.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0987.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0987.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0988.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0988.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0999.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/100_0999.jpg)
Cool!!! ;D
im guessin that little fan is not gonna do the trick
Quote from: garrett jerry on August 05, 2010, 11:25:26 PM
im guessin that little fan is not gonna do the trick
That thing moves some air. Permacool. Getting all the air out of the motor is whats giving me a headache.
LOOKING GOOD CHRIS.... IS IT GOING TO BE READY FOR THE THUMB RUNNER EVENT ON THE 14TH?
Quote from: Axlejack on August 07, 2010, 12:18:14 AM
LOOKING GOOD CHRIS.... IS IT GOING TO BE READY FOR THE THUMB RUNNER EVENT ON THE 14TH?
Ready or not it will be there. Even if I have to bog it with air in the cooling system it will take longer to over heat it than it will for me to blow the pit. LOL Hopefully.
maybe enclose that radiator or something?? just posting my opinion.. get a shroud on the back side...
Quote from: 84Chevy on August 07, 2010, 02:21:35 AM
maybe enclose that radiator or something?? just posting my opinion.. get a shroud on the back side...
I got a couple of them out there. I might just have to do that. Thanks.
made my headers alot like those when i put a big block in her sounds good nice and deep
Quote from: ChevyRacer1981 on August 07, 2010, 01:38:47 AM
Quote from: Axlejack on August 07, 2010, 12:18:14 AM
LOOKING GOOD CHRIS.... IS IT GOING TO BE READY FOR THE THUMB RUNNER EVENT ON THE 14TH?
Ready or not it will be there. Even if I have to bog it with air in the cooling system it will take longer to over heat it than it will for me to blow the pit. LOL Hopefully.
go to the parts store chris, get some 5/16 weld in bungs, and weld one at the front of the pipeing by the water pump, and one at the rear, thats about the only possable way to get all of the air out of the cooling system, a couple of my biddies did that whnen they rear mounted there rads and they dont have a cooling problem anymore, all you need are 2 bleeders one up front and one at the rear...
Well Been a long time since I updated this one. Its been sitting for a while and figured I better do something with it. Changed to a 1 piece grill. Pulled the BBC, it cracked over the winter even though I drained it. Picked up a fresh 400+CI SBC with some goodies. Hopefully have it going again within a short time.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0316.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0316.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0311.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0311.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0312.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/imagejpeg_2_20.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0317.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0317.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0323.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0323.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0314.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0314.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0322.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0322.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0324.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0324.jpg)
so all you did today was put the headers on and the grill?????? wtf slacker
Quote from: Flat_Black on September 12, 2011, 12:08:27 AM
so all you did today was put the headers on and the grill?????? wtf slacker
Plugs are in and the oil pump got primed a few times. Ended up having to tear the starter apart and cleaning it from lack of use. PITA to get it back together but its back on. All the bell housing bolts are in and tight, Balancer and crank pully on and tight, and got the distributor in and roughly in the right spot.
Those my old heads? ==roxx
I like this old truck.. nice to see it run someday.. ;D
them them heads you showed me you had stashed away? it needs another big block
Quote from: burl on September 12, 2011, 01:11:01 AM
them them heads you showed me you had stashed away? it needs another big block
Nope whole different motor and heads. Thanks Jjay78 ++peace
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0309.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0309.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0319.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0319.jpg)
Lookin good
Quote from: Chevy Racer on September 12, 2011, 01:12:50 AM
Quote from: burl on September 12, 2011, 01:11:01 AM
them them heads you showed me you had stashed away? it needs another big block
Nope whole different motor and heads. Thanks Jjay78 ++peace
no problem man, and i hope chad won't be right about the life span lol... let me know when your ready and i'll help ya get the cam and everything broke in, hope ya like the motor!!!
thought you said you was gonna change the valve covers lol... if i ever figure out where we put the cam card and the rest of the paper work on it i'll run it over to ya
Quote from: Jjay78 on September 12, 2011, 03:03:39 AM
thought you said you was gonna change the valve covers lol... if i ever figure out where we put the cam card and the rest of the paper work on it i'll run it over to ya
Covers are just sitting on there with the 2 bolts in them. I want to clean up the other covers first.
At this pace you may make the dog party lol. Good to see it moving along.
nice truck
hurry up I wanna see it ditys lol
Quote from: betterbeaters on September 13, 2011, 12:03:33 AM
hurry up I wanna see it ditys lol
x2 lol, and i know a spot close by to go play!!
Getting more parts and working on it more tomorrow.
what ya need to get bud?
Quote from: Chevy Racer on September 17, 2011, 03:25:22 AM
Getting more parts and working on it more tomorrow.
how? bringing to the shop?
Quote from: Flat_Black on September 17, 2011, 03:30:09 AM
Quote from: Chevy Racer on September 17, 2011, 03:25:22 AM
Getting more parts and working on it more tomorrow.
how? bringing to the shop?
lol drop it here if ya wana, we'll get er done quick! lol
Fire it up tomorrow. Rewire everything and waterproof it. O yeah still got to fix the front axle.
Quote from: Chevy Racer on September 21, 2011, 02:04:23 AM
Fire it up tomorrow. Rewire everything and waterproof it. O yeah still got to fix the front axle.
2 axles are over rated.. just keep the front end up in the air the whole time lol
Been a while since I saw this truck in person, still looks badass!
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0347.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0347.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0349.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0349.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0348.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0348.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/th_VIDEO0046.jpg) (http://s471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/?action=view¤t=VIDEO0046.mp4)
Looking good!!!!
looks good man, get to play with it yet?
Quote from: Jjay78 on September 24, 2011, 01:16:19 AM
looks good man, get to play with it yet?
Not yet. Got to get it all rewired and waterproofed and new battery.
cool!
Quote from: Chevy Racer on September 24, 2011, 02:56:37 AM
Quote from: Jjay78 on September 24, 2011, 01:16:19 AM
looks good man, get to play with it yet?
Not yet. Got to get it all rewired and waterproofed and new battery.
well bring it up here and we'll go test out the waterproofing....
The 1.65 harland sharps are on and adjusted. Fires right up now that the timing is close. Going to get a lower temp thermostat and some race fuel hopefully this week. I'm sure it will like 110 more than the 93 I get down the street. Getting closer to finally getting it dirty.
that motor should love 110, lf ya want i can grab some next time i'm down that way
Fuel pump wasn't keeping up with the demon so pick up a holley blue and regulator, thanks Tom, and finally got some 110. Have yet to put it in. Trying to burn up as much of the 93 as I can before I do. Still needs waterproofed. Hopefully an axle upgrade is in the near future....?
hopefully you're gonna put some valve covers on there lmao
Quote from: MR NASTY on October 11, 2011, 06:17:44 PM
hopefully you're gonna put some valve covers on there lmao
Going to retorque the heads tonight to be safe and the covers will be on it.
I love s dime boggers! Looks sick!!
Quote from: Chevy Racer on October 11, 2011, 06:23:44 PM
Quote from: MR NASTY on October 11, 2011, 06:17:44 PM
hopefully you're gonna put some valve covers on there lmao
Going to retorque the heads tonight to be safe and the covers will be on it.
good idea, now that it's been warmed up a few times it never hurts to recheck, lemme know a good time, i got all the torque wrenches in the trunk for ya
New rear axle is in. Locked with 456 gears.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0450.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0450.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0448.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0448.jpg)
ford parts....
Quote from: Jjay78 on November 08, 2011, 03:57:30 AM
ford parts....
BOOM
taking bets on what goes first. motor 2 to 1. rear end 6 to 10, trans 3 to 1
F U Both.
Quote from: Chevy Racer on November 08, 2011, 04:09:27 AM
F U Both.
hey now gotta be nice to us.. you're gonna need those parts rebuilt ==roll
i got 60 on the rear end
is this you? (http://edge.ebaumsworld.com/mediaFiles/picture/552006/1048879.jpg)
Give me 75 on the tranny
got a hondo on the motor ....want to see him and jjay cry!!! lmfao
Quote from: scooterbob on November 09, 2011, 04:43:44 PM
got a hondo on the motor ....want to see him and jjay cry!!! lmfao
NOT gonna happen..if it starts to get some warm up time before 6500 rpms get thrown at it!!!!
Quote from: Jjay78 on November 10, 2011, 02:48:14 AM
Quote from: scooterbob on November 09, 2011, 04:43:44 PM
got a hondo on the motor ....want to see him and jjay cry!!! lmfao
NOT gonna happen..if it starts to get some warm up time before 6500 rpms get thrown at it!!!!
IF being the word of the day...
do you still have that hood if so i have a nice 2 inch i will trade for that one in box me if so
Quote from: poorboyzmuddin on November 10, 2011, 07:19:29 PM
do you still have that hood if so i have a nice 2 inch i will trade for that one in box me if so
The stock hood or the Huge cowl one? I run the stock one. The cowl one is long gone. I couldn't see crap with it on.
Hey chris u gonna have this done by next year so I can run with ya?
Quote from: NovaKane on November 27, 2011, 05:24:19 AM
Hey chris u gonna have this done by next year so I can run with ya?
Hoping to have it 100% and tested for next season. ++peace
Rock on...
Quote from: Chevy Racer on November 27, 2011, 06:04:07 AM
Quote from: NovaKane on November 27, 2011, 05:24:19 AM
Hey chris u gonna have this done by next year so I can run with ya?
Hoping to have it 100% and tested for next season. ++peace
just start letting it warm up first!!! and i'm still betting on the rear end....
Just picked up a fresh TH400 and NP208 instead of the TH350 and 205. More upgrades hopefully coming soon.
you'll like the gearing a lot better
Saving the one TH400 for a spare and dropped off one to Mudman a week or so ago. Need a nice stall and a 456 geared D60 front yet. Started it up yesterday. Dam I want to get it muddy. loll
your not the only one that wants to !!!
Should be going to get the trans this week and just picked up a D60 front. Got a line on some 456 gears for it to match the rear. Going to be a whole new truck when it hits the mud. Might even have a set of uprights in its future. ;D
just let me n chad supervise you n bubba working on it!!!!!!
What gears does your 60 have?
Just leave it be and run it that way...it will keep your front on top
Thought about it. I might just to see the difference. Switching to the aluminum 208 case and I'm scared it will blow apart like it did on "Big Blue" and that had the same gears front and rear. I know that was ALOT heavier but still might look for a 205 as a spare.
I've never broke a t case yet...
Done yet? lol... keep up the work mud is coming
Quote from: Squirell on April 02, 2012, 12:43:18 PM
I've never broke a t case yet...
Bull I seen you do it to the red s-10 at Daves place. Or was that the trans housing? Something back there.
Trans housing broke in two cause I didn't have the brace on the t case
Quote from: Squirell on April 02, 2012, 06:14:41 PM
Trans housing broke in two cause I didn't have the brace on the t case
Knew it was something like that.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0234.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0234.jpg)
Where did you get your not so mendral bent headers? 208 is still rockin in voodoo. No problems yet.
DEC headers but got a good deal on them from a friend that never used them. Thnks again Axlejack. ++peace
Is this thing runnin yet? ;D
Nice chris. Can't wait to see that thing at a bog. ;D
Quote from: old school truck dude on April 03, 2012, 10:52:42 AM
Is this thing runnin yet? ;D
It's been running. I'm just upgrading everything before it hits the mud again. New or different motor, trans, case, axles, gears so far.
what was a good deal schoenfelds are 189 and come with gaskets and bolts and they are mandrel bent them dec headers kill power
still waiting to see my motor actually do something chris.......
and put some valve cover gaskets on it!!!
Picked up the Fresh Trans by Mudman tonight. Got to scratch up a few more bux for the stall converter I want and away I go. Valve cover gaskets will be on it soon. Got to check the fit on the up rights. Get your arse over there Saturday and check the torque on the heads while I got the headers off.
alright man, i get out at 4 and i'll head over there... bubba will probly come too
Quote from: Jjay78 on April 05, 2012, 02:08:39 AM
still waiting to see my motor actually do something chris.......
He says its BEEN runnin, ==dunno I aint heard it run in quite a while loll ==jk
oh it sits there n runs really good...yup..sits there..n runs .....
==roll
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0235.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0235.jpg)
The upgrades.
Fresh trans by Mudman. Thanks again Ryan.
D60 front. Thanks Axlejack.
DEC uprights with rain caps. Thanks Axlejack again.
Jegs gears reduction starter. Thanks Jjay78.
More to come. Install pics to come too.
hey let me know when ur gonna drop that off, n i'll make sure me n bubba are at the shop to help unload !!!
nice parts!
sweet
Is it actually gonna bog this year? We can drag race through the cat tails.
Quote from: Blackout on April 07, 2012, 12:34:17 AM
Is it actually gonna bog this year? We can drag race through the cat tails.
Run it. I'll follow you with my 5" smaller tires. :P
D 60 with detriot locker and 6:17 gears installed.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0299.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0299.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0300.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0300.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0303.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0303.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0304.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0304.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0308.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0308.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0315.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0315.jpg)
Steering issue.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0306.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0306.jpg)
Gonna swap rears?
That's a Detroit Locker...
So what happened to the Jeep after ya took that stuff off..?
Headed back to my house
Quote from: TopFist on April 28, 2012, 01:09:04 PM
Headed back to my house
Oh.. Just curious, basically ;D
Quote from: TopFist on April 28, 2012, 01:09:04 PM
Headed back to my house
Be there with it tomorrow. ++peace
Quote from: J.C. on April 28, 2012, 02:16:01 PM
Quote from: TopFist on April 28, 2012, 01:09:04 PM
Headed back to my house
I see how it is :)
He's got to rebuild it so you can get it back then I'll somehow end up with it again and we start the process over. LOL
Quote from: Chevy Racer on April 28, 2012, 02:35:19 PM
Quote from: J.C. on April 28, 2012, 02:16:01 PM
Quote from: TopFist on April 28, 2012, 01:09:04 PM
Headed back to my house
I see how it is :)
He's got to rebuild it so you can get it back then I'll somehow end up with it again and we start the process over. LOL
Sad but true.
http://www.youtube.com/watch?v=A8MO7fkZc5o# (http://www.youtube.com/watch?v=A8MO7fkZc5o#)
LOL whens it my turn to have it? I feel left out...
Nice S10
Rear axle now installed. Got to buy some longer U-bolts but its in for now. Getting closer.
thought ya were supposed to drive it and break it before ya fix it again.....
Quote from: Jjay78 on April 30, 2012, 02:25:08 AM
thought ya were supposed to drive it and break it before ya fix it again.....
Naaaa I'll wait till I play with it a time or 2 before I break it. My money is on a driveshaft.
i'll go with a u joint or tire now....
i got ubolts for a 14 bolt. new, not sure if they would work for ya.
Got the right steering parts on the way. Thanks JeepingChris. Going to buy longer U bolts hopefully by the end of the week. Got to get to work on this some more. Seems like I only ever get 1 day a week to work on it these days. At this rate it will take way too long.
bring it over, i'll put it together for ya...n no i won't let bubba help lol
Steering is now fixed. Next up brakes lines and trans/t-case swap.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0339.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0339.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0340.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/IMAG0340.jpg)
That steering setup killed me......always a left turn off the line...hope you have better luck
Quote from: 4-play on May 06, 2012, 01:32:02 AM
That steering setup killed me......always a left turn off the line...hope you have better luck
??? Curious..
you should just go to a cross over set up i will never go back nice build
can't wait to see it get dirty....
Jarmins in 3 week! Gonna be ready?
Quote from: Blackout on May 08, 2012, 01:51:33 AM
Jarmins in 3 week! Gonna be ready?
rumor has it hes gonna blow it up with n02 this weekend...i wont see it im going to play with the big boys in the swamp! Somebody get vids.
I'll save the blue bottle for the comp bog in millington. Still got some work to do before it gets dirty. Hopefully buying the new stall within the next week or 2 and get the fresh trans and case in it, brake lines connected, and driveshafts remade.
what ya got left to do?? and how many knuckles ya skin up so far??
Took the crossmember in to work and used the blast cabinet. I love that thing.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0002.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0002.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0001.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0001.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0005.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0005.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0003.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0003.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0006.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0006.jpg)
hmmmm.. they look a lil cleaner than when i droped em off....lol
Should change the name to pretty in pink...or some day il see mud!
Quote from: MR NASTY on May 10, 2012, 11:19:16 PM
Should change the name to pretty in pink...or some day il see mud!
lmao
Looking good chris. Can't wait to see it running.
Quote from: MR NASTY on May 10, 2012, 11:19:16 PM
Should change the name to pretty in pink...or some day il see mud!
==kk
Quote from: old school truck dude on May 06, 2012, 08:04:27 AM
Quote from: 4-play on May 06, 2012, 01:32:02 AM
That steering setup killed me......always a left turn off the line...hope you have better luck
??? Curious..
Whats the deal with the left turn..?
That setup has horrible bumpsteer characteristics. Becomes real noticeable with soft suspension and lots of weight transfer.
Quote from: Blackout on May 14, 2012, 02:42:30 AM
That setup has horrible bumpsteer characteristics. Becomes real noticeable with soft suspension and lots of weight transfer.
I still got 3/4 ton leafs under it. My suspension is anything but soft. LOL About the only change lately is the old trans and case is out. Got to get a new stall converter before the new one can go in. Will probably change the starter to the new gear reduction one tomorrow. Maybe mount the NOS bottle too.
Mine had same setup it worked fine. But when you leave the line like 4 play it can be an issue.
Finally. New B&M 2400 nitrous approved converter ordered today. Now to find time to install it.......
Quote from: Chevy Racer on June 12, 2012, 12:33:33 AM
Finally. New B&M 2400 nitrous approved converter ordered today. Now to find time to install it.......
drop everything off n i'll let bubba do it
The Brown truck was good to me. $400+ later that is.........
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0210-1.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0210-1.jpg)
NICE
Trans and T-case got put in today. Also fixed the rear brake line. Getting some motivation back. And the new sticker for the front window i ordered.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/twitchysticker.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/My%20truck/twitchysticker.jpg)
Get on it...There's no way I can have the jeep done before you. All I need is brake lines...And Time.
Quote from: TopFist on June 18, 2012, 01:41:05 AM
Get on it...There's no way I can have the jeep done before you. All I need is brake lines...And Time.
Takes alot longer when you have to wrestle things yourself especially when everything weighs twice or more what I weigh. LOL Only other major thing to do I have to haul it someplace and do it. Got to get rid of that rear lift block so a shackle filp is next.
well put some weight on man, might as well drop twitchy and the blue one off and ill get twitchy done while your unloading the blue one
Looks hungry, somebody give him a sandwich ;D
Quote from: old school truck dude on June 18, 2012, 10:46:30 PM
Looks hungry, somebody give him a sandwich ;D
Dam right. The woman won't make me one. LOL
Still hungry?? How bout some chicken?? ==roll
that's funny right there...
Cant believe he aint been back on here, somebody go get the trans off of him ;D
naw.. he probly just got one of those joke cards that says (how do you keep an iddiot busy for hours??..... turn over..) on both sides of the card..... ==roll ==roll ........ or he's just admireing the nice pink parts..... ==roll ==roll
Quote from: Jjay78 on June 21, 2012, 02:02:34 AM
naw.. he probly just got one of those joke cards that says (how do you keep an iddiot busy for hours??..... turn over..) on both sides of the card..... ==roll ==roll ........ or he's just admireing the nice pink parts..... ==roll ==roll
Just waiting for you to come out to change the push rods and torque the heads. Then I got to cut some holes for the uprights and finish the trans cooler install.
Started mounting the trans cooler. Got to add a bar for the other side to mount to, wire the electric fan to power, and get longer lines. Stole a dipstick tube from another th400 I had laying around so that got put in as well.
Quote from: Chevy Racer on June 23, 2012, 01:22:22 AM
Started mounting the trans cooler. Got to add a bar for the other side to mount to, wire the electric fan to power, and get longer lines. Stole a dipstick tube from another th400 I had laying around so that got put in as well.
wow ,all i hear is excuses excuses!!!! lol little less time with the stickers and rattle cans and this thing might see mud "next" year....lol
No more excuses. Taking it into work, picked up a sponsor, and getting to work. Push rods have been changed, found a front driveshaft that will work, and, thanks to the new sponsor, full access to a fully equiped fabrication shop, after normal work hours. Just a matter of time now. It will see mud at Millington dam it, if not sooner. Now whats your excuse???
get er done
applaudd cant wait to see that motor in the mud with the add on.. he he he
Let's see it Saturday
what add on.....is that why your having me build another motor already????
Quote from: Jjay78 on July 26, 2012, 03:46:20 PM
what add on.....is that why your having me build another motor already????
ha ha ha love it....last i seen that add on was on fllor of his truck still ...lol
Is nitrous doesn't scare anybody still 100 horse understock
Quote from: Squirell on July 26, 2012, 03:30:09 AM
Let's see it Saturday
Won't make it saturday with it. Got the front driveshaft retubed today, started making slightly smaller lift blocks for the rear, and drilled a couple more holes for the crossmember.
Smaller rear lift blocks are made and in. Gong to be working on it after work tomorrow for a while to get the rear shaft done and hopefully make all the driveshaft loops too.
Hell ya man hopefully ill get mine done to run with ya..
Quote from: Takes a Lick'n on August 02, 2012, 02:18:43 AM
Hell ya man hopefully ill get mine done to run with ya..
Look back a page or 2 and you will see the crossmember you need for that case and adapter you got from me.
Got the rear driveshaft cut down and put back on today with a new U joint. Still need a new joint for the front but thats done too. Got all the brake lines hooked up. Got 4 wheel disc. Just got to bleed them. Made 1 piece to enclose the engine compartment but got hungry and went home. Got a couple people staying over to help tomorrow. Should have the driveshaft loops done and the engine area water proofed better quicker with help. Also got to wire a couple things but thats easy stuff.
Hope you get it done...
Sweet chris. You going to bringn it Saturday?
Quote from: Chevy Racer on February 13, 2009, 04:12:06 PM
Went and did a little wheel'in and deal'in and brought this home. Got it from riverrat. 305 marine motor, cam, headers,, edelbrock intake and carb, Th350, NP205, 14 bolt, 10 bolt, 4:10's, 38.5x14.5x15 Swampers. I put a stock hood back on it and have to do some finishing. I will update when I get it done.
sweet truck dude! its almost exactly as mne. lol. i just put dana 60 in the front and an 80 in the rear. 42in super swampers to.
Quote from: fred b on August 03, 2012, 10:41:29 PM
Quote from: Chevy Racer on February 13, 2009, 04:12:06 PM
Went and did a little wheel'in and deal'in and brought this home. Got it from riverrat. 305 marine motor, cam, headers,, edelbrock intake and carb, Th350, NP205, 14 bolt, 10 bolt, 4:10's, 38.5x14.5x15 Swampers. I put a stock hood back on it and have to do some finishing. I will update when I get it done.
sweet truck dude! its almost exactly as mne. lol. i just put dana 60 in the front and an 80 in the rear. 42in super swampers to.
I think the only thing still on the truck from when I got it is the stock hood. LOL Everything else is different.
Current Stats: 400 SBC built a little, Edelbrock heads, Bow tie intake, Demon carb, TH 400 with 2400 stall built a little, NP 208, D60 front and rear with Detriots and 6:17 gears, 39.5 boggers.
The other loop for the rear driveshaft is on now and a couple wires got ran to the trans cooler fan. Both thanks to a couple guys that stayed after work with me. Got the brakes bled and the starter changed to the gear reduction. Needs a couple shims. Looking forward to getting it dirty very soon. Millington here I come.
mostly got the brakes bled.....
Quote from: Jjay78 on August 04, 2012, 05:31:19 PM
mostly got the brakes bled.....
Close enough. I don't want to brake the bleeder off on that one. It will stop it just fine.
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0029-1.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0029-1.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0030.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0030.jpg)
where did u get tractors and where the hell is the fbo sticker?
Looking good applaudd
Quote from: Flat_Black on August 07, 2012, 02:46:23 AM
where did u get tractors and where the hell is the fbo sticker?
Your slow ass hasn't got me one. Told you to get one 12" by 12" or so but nothing. You got till the end of the week sucka.
ok what about the tractors fool
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0033-1.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0033-1.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0032.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0032.jpg)
applaudd looks awsome chris....
Lookin awesome ole buddy!! ==rocks ==roxs ==roxx ==wgm
glad you got it ready for millington
Quote from: redneck renegade on August 07, 2012, 11:58:05 PM
glad you got it ready for millington
Got to be there and see you in a dress. LOL
Looks different then what i seen it months ago..
What size are those tractors? looks good
Lookin good!
Sweet
Wish I didn't have a bachelor party up north saturday... I come get my 50 dollars from you!!!
i think those tractors used to be mine not too sure but glad it got around
(http://i196.photobucket.com/albums/aa169/jeep454_2007/th_2012-08-11_21-14-53_630.jpg) (http://s196.photobucket.com/albums/aa169/jeep454_2007/?action=view¤t=2012-08-11_21-14-53_630.mp4)
(http://i196.photobucket.com/albums/aa169/jeep454_2007/th_2012-08-11_17-56-19_587.jpg) (http://s196.photobucket.com/albums/aa169/jeep454_2007/?action=view¤t=2012-08-11_17-56-19_587.mp4)
Truck ran Awesome. Everything held together. Got to mount the electric fan a little better, fix an front main seal issue, and add some waterproofing to the engine compartment. All in all it held for 3 classes, 35's, 40's, and tractors. Thanks again to all that helped and continue to help me on this.
applaudd
Went over the truck a little bit today and found a couple things to fix. Breather tube broke off the rear axle, little milkiness under the valve covers but none in the oil so it needs a good cleaning and retorque to be safe, and the rear springs seemed to have got caught after all the bouncing I did in the tractor tire class. LOL
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0047-2.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0038-1.jpg) (http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0038-1.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0039.jpg)
(http://i471.photobucket.com/albums/rr80/ChevyRacer1981/IMAG0041-2.jpg)
Thats cool you made it all the way through.. But i think your truck needs washed now
can't wait to see ya push the motor a lil......
New fuel pump and bigger carb in the near future. Need a new u joint on the front knuckle and I should be ready.
Sweet!
bigger carb is already on /in it.....
Quote from: Jjay78 on May 19, 2013, 03:01:54 AM
bigger carb is already on /in it.....
Good thing you come over and get bored or it would still be on the shelf. LOL