Text only | Text with Images

WeGotMud

Projects & Parts => Garage/Tech => Topic started by: Bo Duke on March 12, 2009, 09:32:06 AM

Title: Ford Dana 44 Half ton Straight.......
Post by: Bo Duke on March 12, 2009, 09:32:06 AM
Can you switch out the spindles and hubs and everything from a half ton axle and put the 3/4 ton outers on it....??????

forddd ==cl ==cl
Title: Re: Ford Dana 44 Half ton Straight.......
Post by: Norm Henderson on March 12, 2009, 10:17:06 AM
.....i dont think so.....case and tubes are smaller......sorry your stuck with poopy axles mac!!!! forddd ==djdj
Title: Re: Ford Dana 44 Half ton Straight.......
Post by: Squirell on March 12, 2009, 11:16:26 AM
yes you can. everything on the inside is the same. just from the knuckle out is different. just switch from the knuckle out and you can do it. just did it to my jeep.
Title: Re: Ford Dana 44 Half ton Straight.......
Post by: Bo Duke on March 12, 2009, 11:21:25 AM
Quote from: Squirell on March 12, 2009, 11:16:26 AM
yes you can. everything on the inside is the same. just from the knuckle out is different. just switch from the knuckle out and you can do it. just did it to my jeep.

So i cant just get 3/4 ton spindles and hubs...... ?
Title: Re: Ford Dana 44 Half ton Straight.......
Post by: Squirell on March 12, 2009, 11:22:12 AM
yeap
Title: Re: Ford Dana 44 Half ton Straight.......
Post by: Ranger Dave on March 12, 2009, 11:57:32 AM
Quote from: Squirell on March 12, 2009, 11:22:12 AM
yeap


X2
Title: Re: Ford Dana 44 Half ton Straight.......
Post by: Norm Henderson on March 12, 2009, 10:30:51 PM
i thought the case its self was smaller?
Title: Re: Ford Dana 44 Half ton Straight.......
Post by: badbowtie383 on March 20, 2009, 02:31:57 AM
44 is a 44 even the spindels
Text only | Text with Images