who has the biggest motor and highest horse power? besides jwarners yukon......
i HAD a 632 merlin in a 79 camaro me and a few buddies were building, but everyone lost interest in it, so we sold it all off. 800ish HP only ran it 2 times in the garage. lol
I have a 4.9l straight 6......I think i win!!!!
me me me. i got a 151 C.I. that beast puttin out 105 HP @ 3600 RPM and 95 ft lb @ 2800 rpm
jk... but i am lookin into gettin the 408 stroker assembly for the 360, bore it over 30 and should make about a 410 C.I. chrysler small block...
I had a 383 600 hp.... not the biggest but it worked! I'll have a 383 with 750 hp+ soon!
My samurai has a huge 1.6L 4 banger.
i got it, it weights 732 lbs ==roll
Got a lil small block 406, 10.5-1, pushin bout 400-450hp so not this guy
not me I have a stock 7.9L/ 460 bbf in the bronco a 5.9L/ 360 sb in the durango and a 8.1L/ 496 bbc in the GMC HD
318 magnum in the dodge
==idunno ive got the biggest belly, what do i win?
hmm dont think my 200 horse 355 wins this
yea jwarners yukon is insane.
runnin 350 stockers in the blue truck i have a 355 dart heads should push 400 -425 hp for the jeep
no me only a 306 with 350ish hp
not me, ive heard some pretty healthy boggers.
My old tow rig had a 579 cid engine.
i win i have a 6.5 hp briggs
I have two 468 BBC... can I add them together. They are both in a truck... just not the same one.
Quote from: four_by_ken on May 14, 2009, 12:16:50 AM
I have two 468 BBC... can I add them together. They are both in a truck... just not the same one.
if we can do that then i have a 1.6+2.5+2.5+3.8+4.3+4.3+5.0+5.0+5.2+5.9 ;D
not mine i have a amc360 60 over 425hp
its not the baddest, but it sure is a pretty sweet 406, full roller, aluminum heads, pushin 550 hp
next season will be a different tune of hp and different fuel hmmm....
HP doesnt exist....
now lets talk about TORQUE!
i'm aiming at 600 ft/lb torque outta my 355 sbc when im done quiett
i got a little 454 and a brand new 454 just about done cant tell just wate tell you here it
I'll go torque. in the ball park of 900.
the space shuttle
I got a 305 Mercury Marine motor. not sure about the hp or torque but seems to run pretty good
i got a chevy 366 bbc in my truck, had to cut the frame a little to get the exhaust manifolds to clear enough in a full size chevy truck
just a 468 bbc w/ a few little eztras not sure on hp or torque
Quote from: ChevyRacer1981 on May 14, 2009, 02:49:37 AM
I got a 305 Mercury Marine motor. not sure about the hp or torque but seems to run pretty good
you mean it runs again lol
me and my dad are thinking about tiying 2 305s together in a mud bugey sbc 305 = 225hp x2 = 450hp
I've got a rompin' stompin' 2.2L Ecotec!!!
Cocky and The boss
Quote from: BIG DOG on May 18, 2009, 12:56:03 AM
i see a lot of i could of or use to or had the ? was now how has the motor thank you
wtf?
Quote from: BIG DOG on May 18, 2009, 12:56:03 AM
i see a lot of i could of or use to or had the ? was now how has the motor thank you
??? ??? ==doh ==doh
I've got the biggest......................oh you mean motor? ==roll
Quote from: BIG DOG on May 18, 2009, 12:56:03 AM
i see a lot of i could of or use to or had the ? was now how has the motor thank you
hmm i think he was saying hes seen a lot of people saying they could have had the big one or used to have a big one but the question was who HAS one right now that they can prove... thank you ... thats what i think he meant .. dont know
I have a small motor...under 400 cid..but it will run with any BBC that i have seen!
what a bunch of BS it's easy to tell what trucks have it and who's blowin smoke lol
what do you mean by "biggest motor" Cubic Inches or Horse Power ???
Quote from: mudslayer2008 on May 18, 2009, 12:17:21 PM
what do you mean by "biggest motor" Cubic Inches or Horse Power ???
doesnt matter just want to see whats out there
Yellow jeep.....406 ci sbc stroker Blue jeep....612 ci bbc stroker
bbc 540 with callies crank with alum heads and spraying that happy gas
7.3 turbo diesel in the f350 and 488 caddy in posterchilds truck
Quote from: badhabit on May 19, 2009, 02:16:45 AM
bbc 540 with callies crank with alum heads and spraying that happy gas
Yehaaa!!!!
Quote from: MudMonster on May 19, 2009, 02:40:20 AM
488 caddy in posterchilds truck
cool!
I like this thread again!
i have a 350 vortex with k&n airbox with a thottlebody spacer. runs pretty good.
I would say brads copcar or mgd2 have one of the bigger motors I think theres 406s but have a but load of hp!
im building a 462ci bbc 648hp at 5500 and 822ft-lbs off idle, well thats what the desktop dyno says
Quote from: tits and beer on May 19, 2009, 03:37:43 PM
I would say brads copcar or mgd2 have one of the bigger motors I think theres 406s but have a but load of hp!
Yep Brad has a 406. He'd have a lot more power if put the right size carb on it. Last time I talked to him he still had a little 670 on it.
i've got a 1.8 that revs to 32,000 and makes 1.35 hp! ==np quiett
468bbc out of my 69 Nova with a fogger and about 625hp and not sure on the tq waiting for the new 509 to be finished for the Nova
I don't know what 02 Chevy's got in his truck but thats the badest truck I've seen in a long time.
chevy 383 stroker eagle kit roller cam 1.5 and 1.6 roller rockers alumuin 23 degree angle port heads 13:1com holley intake 750 dp drilled out to an 833 and jetted have nothing to rut in to yet ran it in an 85 chevy 3 times was fun
02 chevy has a bad ass truck it hauls ass bad bowtie 383 has a good running motor to if he ever puts it in somthing
homewreckers 362 rips. stepdads building a 496 right now. kb 13.5:1 pistons, eagle crank, eagle rods, .750 lift roller cam, etc. desktop dyno says 700+ hp with 1050 dominator.
I have a 446 big block mopar its pushin 680hp-800ft tq but i want more!
i got A 468 putting in my 70'
Ive got a 350 with 202 s/r heads, 510 cam, 1.5 rollers, rpm intake, 750 carb, 2 broken rods lol sucks
I have a 400 cid six cylinder diesel in my farm truck.
I got a snotty little 302!!!!! LOL
Quote from: badhabit on May 19, 2009, 02:16:45 AM
bbc 540 with callies crank with alum heads and spraying that happy gas
thats close to the motor my neighbor is trying to get me to put in my truck
his 548 has the callies dragonslayer crank with oliver rods and i believe ross pistons on alcohol and laughing gas, he upgraded his camaro to a 588 so this one is torn down in the corner of his garage and is pretty tempting
Im gonna nomanate sneky pete i herd 632 alum block?!?!? Allll i know is it can walk on water with cut boggers
(http://i190.photobucket.com/albums/z81/clydehoover/scan0001.jpg) (http://i190.photobucket.com/albums/z81/clydehoover/scan0001.jpg)
why touch the water
Quote from: BIG DOG on June 07, 2009, 08:41:42 PM
(http://i190.photobucket.com/albums/z81/clydehoover/scan0001.jpg) (http://i190.photobucket.com/albums/z81/clydehoover/scan0001.jpg)
why touch the water
yummy
Quote from: TOMAC on June 07, 2009, 08:47:23 PM
Quote from: BIG DOG on June 07, 2009, 08:41:42 PM
(http://i190.photobucket.com/albums/z81/clydehoover/scan0001.jpg) (http://i190.photobucket.com/albums/z81/clydehoover/scan0001.jpg)
why touch the water
yummy
oh ya
I GOT BIG 305 IN CH IN IT HURT THE 454 HA HA FREE IS GOOD
==wgm a=f ==roll ==roll ==roll :'( :'( ==roll :'( ==roll :'( ==roll ==roll
(http://i242.photobucket.com/albums/ff142/orangecrush72/P1000705.jpg) (http://i242.photobucket.com/albums/ff142/orangecrush72/P1000705.jpg)
nice
Quote from: Bigdaddy on May 13, 2009, 05:27:32 PM
==idunno ive got the biggest belly, what do i win?
Mines bigger than yours! lol But it's getting smaller and i'm starting to like eating like a rabbit.
My motor is bigger than most. 16L detroit! No there is not suposed to be a . between the 1 an the 6.
I have to nomunate my friend andy for this one auctaly since he dosent get on here much.. "andy michalik" I'll just say it's a blown alky injected bbc. http://wegotmud.com/forum/index.php?topic=24636.0
mild 460ci bbc in a jeep cj-7. does a lot of breaking things.lol no it's not the biggest there are lots with more then I have, but can you ever have enough?
Quote from: LowSbody on June 14, 2009, 02:47:06 AM
I have to nomunate my friend andy for this one auctaly since he dosent get on here much.. "andy michalik" I'll just say it's a blown alky injected bbc. http://wegotmud.com/forum/index.php?topic=24636.0
1200hp id say so
A new fresh 572 for the Yukon. ;D
on memorial day weekend I broke a rod and wrecked the block, pan, crank, bent valves ==doh ==doh
Quote from: jwarner on June 27, 2009, 02:09:46 AM
A new fresh 572 for the Yukon. ;D
on memorial day weekend I broke a rod and wrecked the block, pan, crank, bent valves ==doh ==doh
WTF, money bags. i wish i had half that motor
IS HE BREAKING IT IN OR SCARED OF IT? JUST KIDDING, SOUNDS MEAN. MORE TRACTION MAYBE WHEELIES?
I HAVE A 540 CI BBC IN MY BOGGER ABOUT 800 PONIES. IT IS CURRENTLY FOR SALE ALSO IVE GOT 17,000 INTO IT AND I WOULD TAKE 10,500. IT IS IN THE LIGHT BLUE S-10 THAT JUST GOT PAINTED.
Quote from: MUDRACER2007 on August 01, 2009, 03:21:58 PM
I HAVE A 540 CI BBC IN MY BOGGER ABOUT 800 PONIES. IT IS CURRENTLY FOR SALE ALSO IVE GOT 17,000 INTO IT AND I WOULD TAKE 10,500. IT IS IN THE LIGHT BLUE S-10 THAT JUST GOT PAINTED.
id be happy with that !!!!
1835 cc's of pure german thunder kickin out a crazy 60hp of jaw dropping power. I will crush all who park in front of me ==np :P
Quote from: MUDRACER2007 on August 01, 2009, 03:21:58 PM
I HAVE A 540 CI BBC IN MY BOGGER ABOUT 800 PONIES. IT IS CURRENTLY FOR SALE ALSO IVE GOT 17,000 INTO IT AND I WOULD TAKE 10,500. IT IS IN THE LIGHT BLUE S-10 THAT JUST GOT PAINTED.
that trucks rips!!!! wish I had the money to buy it!
Quote from: 84Chevy on August 02, 2009, 12:43:48 AM
Quote from: MUDRACER2007 on August 01, 2009, 03:21:58 PM
I HAVE A 540 CI BBC IN MY BOGGER ABOUT 800 PONIES.
id be happy with that !!!!
I would be....... for about a season. Then I'd be bitchin' that I needed more! loll Nice motor though!
This is the motor I just got in today for that S-10 bogger I have been building, heres the spes, tell me what you think
EXTREME PRO STOCK 932 CU. IN. SEMI-HEMISPHERICAL 5.300" BORE SPACING 2140HP
GM SEMI-HEMISPHERICAL HEADED ENGINE
5.080" BORE X 5.750" STROKE
NATURALLY ASPIRATED (NO NITROUS)
2140 HP @ 81001475 LBS. Torque @ 6500
Complete and Dyno TestedPRICE $89,300.00,
The Post above
==jk ==jk ==jk ==jk ==jk ==jk ==jk ==jk ==jk ==jk ==jk ==jk
I THINK THE TOPIC SHOULD HAVE BEEN..." WHOS GOT DINO SHEETS ON THERE MOTOR" LMAO IM GONNA START A TOPIC HOW MUCH DOES IT COST TO BUILD A 650 HORSE 550 FT TORQE MOTOR
Quote from: RaZiN_kAnE on August 05, 2009, 01:53:04 AM
I THINK THE TOPIC SHOULD HAVE BEEN..." WHOS GOT DINO SHEETS ON THERE MOTOR" LMAO IM GONNA START A TOPIC HOW MUCH DOES IT COST TO BUILD A 650 HORSE 550 FT TORQE MOTOR
got like over $4000 in mine
Quote from: RaZiN_kAnE on August 05, 2009, 01:53:04 AM
I THINK THE TOPIC SHOULD HAVE BEEN..." WHOS GOT DINO SHEETS ON THERE MOTOR" LMAO IM GONNA START A TOPIC HOW MUCH DOES IT COST TO BUILD A 650 HORSE 550 FT TORQE MOTOR
Yeah, and I wanna see dyno sheets too! :-)
I've got a small block older gm crate motor , hopefully pushin' 600 hp. My husband said he thinks I will be scared of it.. It was in my truck when I bought it and he has been takin' his sweet ass time and money to re-build it.
Quote from: RaZiN_kAnE on August 05, 2009, 01:53:04 AM
I THINK THE TOPIC SHOULD HAVE BEEN..." WHOS GOT DINO SHEETS ON THERE MOTOR" LMAO IM GONNA START A TOPIC HOW MUCH DOES IT COST TO BUILD A 650 HORSE 550 FT TORQE MOTOR
show me yours?
Who dynos motors? Im putin a 3.0l gm 4cyl together.. Gona be curious what it makes
ive got a 2.9l efi with around 130+/- hp ill out run you anyday!!!!!!! ;D
Quote from: oscar_169 on August 03, 2009, 11:06:24 PM
This is the motor I just got in today for that S-10 bogger I have been building, heres the spes, tell me what you think
EXTREME PRO STOCK 932 CU. IN. SEMI-HEMISPHERICAL 5.300" BORE SPACING 2140HP
GM SEMI-HEMISPHERICAL HEADED ENGINE
5.080" BORE X 5.750" STROKE
NATURALLY ASPIRATED (NO NITROUS)
2140 HP @ 81001475 LBS. Torque @ 6500
Complete and Dyno TestedPRICE $89,300.00,
my snowmobile has bigger pistons...hahahahahahahahahhahahhahahahahhahahahhahaha
i got dino sheets do u tomac???
lets see um
lets get one thing straight im not on here to run my mouth thats what i ment when i said the topic should have been whos got dino sheets on there motor ..some of these guys that tell u there runnin 600 to 800 horse im not belavin...as to my motor i do do have papers for the dino but its not nothin spectaular its a 406 sbc 456 horse at 5500 550 fts torqe ... 406 line bored decked keith black forged pistons total seal rings eagle h beam rods eagle forged 4340 steel crank dart sportsman 2 heads titaniam retainers got a few goodies in there ..i have heard a few really healthy boggers out there but everyone is n ot pushin 600 horse like they think they are like they say wheel ur truck not ur mouth boys
i try and run mine blew up 3 454s all ready thise year then built my new one every thing new from carb to pan it rocks but any moter if it runs wheel it i wheeled every thing from 4 banger to a 502 as long as your haven fun that what matters
now now i dont have papers but summet did say my 350 plus 20 hp for my headers another 16 for my k&n filter 12 more for the 4 barrel and the alu. rad to keep cooler ever more hp
Quote from: burl on August 06, 2009, 10:19:37 PM
Quote from: oscar_169 on August 03, 2009, 11:06:24 PM
This is the motor I just got in today for that S-10 bogger I have been building, heres the spes, tell me what you think
EXTREME PRO STOCK 932 CU. IN. SEMI-HEMISPHERICAL 5.300" BORE SPACING 2140HP
GM SEMI-HEMISPHERICAL HEADED ENGINE
5.080" BORE X 5.750" STROKE
NATURALLY ASPIRATED (NO NITROUS)
2140 HP @ 81001475 LBS. Torque @ 6500
Complete and Dyno TestedPRICE $89,300.00,
my snowmobile has bigger pistons...hahahahahahahahahhahahhahahahahhahahahhahaha
It's not how big the pision its how many ;D
Quote from: RaZiN_kAnE on August 08, 2009, 03:11:52 AM
i got dino sheets do u tomac???
im building a 496 and i dont care to have a dyno sheet... im too worried about my four link than a dyno sheet. theres 1000s of motors in michigan that get it!
A dynamometer or "dyno" for short, is a device for measuring force or power. For example, the power produced by an engine, motor or other rotating prime mover can be calculated by simultaneously measuring torque and rotational speed (rpm). ;D
Quote from: Bennetti on June 07, 2009, 04:52:47 PM
Im gonna nomanate sneky pete i herd 632 alum block?!?!? Allll i know is it can walk on water with cut boggers
yes he can....bad ass rig but hes not in it for fun hes all about money i mean pats a good guy and all but hes very competitive and built his truck to walk all over everybodys....... hes runnin 1100hp w/o nos hes got alot of wins in the bag....also the whole engine is aluminum i garuntee pat would run jwarner eed to get them together hes at eagle fair comp bogg every year
Quote from: burl on August 09, 2009, 03:36:46 PM
Quote from: Bennetti on June 07, 2009, 04:52:47 PM
Im gonna nomanate sneky pete i herd 632 alum block?!?!? Allll i know is it can walk on water with cut boggers
but can he run a field bog all day long
yes he can....bad ass rig but hes not in it for fun hes all about money i mean pats a good guy and all but hes very competitive and built his truck to walk all over everybodys....... hes runnin 1100hp w/o nos hes got alot of wins in the bag....also the whole engine is aluminum besides crank, cam, lifters, push rods, and the bolts holdin it together
he can field bogg it that truck is ay over built, the best of the best on everything, the guys got some $$$$$$$ he owns one of the biggest junk yards in michigan............. but anyways i gurantee no one can touch sneaky pete.
Hands down we have our winner I forgot all about SNEAKY PETE. applaudd applaudd
got a 498ci stroker with afr aluminum head all cnc ported 710 lift camotin cam .Runs 9.90's on motor in the quarter at 140 mph and with 8.80's on the bottle. In a2800 lbs tube chassie chevelle.
biggest i have seen in person is probably the "twisted too" truck. has 598 ci. rumors say 1200+ hp. he walks on water with boggers and tractors.
(http://i244.photobucket.com/albums/gg5/brandonrockey/l_94cb4d7b8234a4272bcf50eb94f38b0d.jpg)
i dont no what moter he has but the adrenilen truck will walk on water
yea adrenaline supposedly has a 540. here is that.
(http://i244.photobucket.com/albums/gg5/brandonrockey/l_006c7be5b438e2391037a102fb63519b.gif)
adrenaline is a bad azz motha shut ur mouth....lol..you give him 20 feet of good mud to hook on and that sucker will walk across 200 feet of water..ive heard its a 540 never heard nothin on the horse power but id have to guess around 800-900 just on motor prob around a 20 thousand dollar motor in er
i saw adrenaline at freelin mx, WOW, he blew right across the top of 4' deep mud 150' long, only truck that did it, he took $500 for first to blow the pit. awesome truck
Quote from: ROCK on August 18, 2009, 06:12:30 AM
yea adrenaline supposedly has a 540. here is that.
(http://i244.photobucket.com/albums/gg5/brandonrockey/l_006c7be5b438e2391037a102fb63519b.gif)
I got my rockwell 2 1/2 tons from him & you should see the wall of Trohies that truck has WON !!!!!!!! applaudd applaudd
Quote from: oscar_169 on August 18, 2009, 04:30:22 PM
Quote from: ROCK on August 18, 2009, 06:12:30 AM
yea adrenaline supposedly has a 540. here is that.
(http://i244.photobucket.com/albums/gg5/brandonrockey/l_006c7be5b438e2391037a102fb63519b.gif)
I got my rockwell 2 1/2 tons from him & you should see the wall of Trohies that truck has WON !!!!!!!! applaudd applaudd
oh i bet!! it is one badass truck forsure. he has won anytime ive seen him run.
the adrenaline truck is owned by Henery Sirmack, and i heard that it was a 540, but this year is a different story. try 698 cubes this year.
Quote from: MUDRACER2007 on August 30, 2009, 11:17:17 PM
the adrenaline truck is owned by Henery Sirmack, and i heard that it was a 540, but this year is a different story. try 698 cubes this year.
dang
Quote from: ROCK on August 18, 2009, 01:37:07 AM
biggest i have seen in person is probably the "twisted too" truck. has 598 ci. rumors say 1200+ hp. he walks on water with boggers and tractors.
(http://i244.photobucket.com/albums/gg5/brandonrockey/l_94cb4d7b8234a4272bcf50eb94f38b0d.jpg)this truck is tim bunkers he was at our mud run, has a 603 ford and is 1098 hp before the spray, but i seen adrenalin beat him at sand lake in one of the classes
so what you think around 1800 hp?
Quote from: jwarner on June 27, 2009, 02:09:46 AM
A new fresh 572 for the Yukon. ;D
on memorial day weekend I broke a rod and wrecked the block, pan, crank, bent valves ==doh ==doh
I have two squirrels spinning around powered by honey roasted nuts, I know that beats all, I WIN. Full Throttle all the way.
Quote from: Thumper on August 31, 2009, 02:53:20 AM
I have two squirrels spinning around powered by honey roasted nuts, I know that beats all, I WIN. Full Throttle all the way.
i thought i was bad... my d.d. is run by two squirrels and a chipmunk... but the chipmunk dont do anything in overdrive or reverse. They get planters mix out of a can, cant afford that roasted stuff.
i have the bigest pice of crap engine what do i get
i have the bigest pice of crap engine what do i win
Quote from: Hot Rod on August 31, 2009, 02:39:35 AM
so what you think around 1800 hp?Quote from: jwarner on June 27, 2009, 02:09:46 AM
A new fresh 572 for the Yukon. ;D
on memorial day weekend I broke a rod and wrecked the block, pan, crank, bent valves ==doh ==doh
he sayed it is detuned to about 1000 or so right now but full bosst probly 1800
Quote from: MUDRACER2007 on August 30, 2009, 11:17:17 PM
the adrenaline truck is owned by Henery Sirmack, and i heard that it was a 540, but this year is a different story. try 698 cubes this year.
Are You Sure on this 698 cubes is CRAZY ==idk
Theres a new truck being built here in mn that was just dynoed at 1486hp
how bout this one we were runnin a 605 bbc curt cheany motor
1198 horse before the bottle dyno'd horse on 114 shell gas
and he is right out of hastings , MI
Quote from: squirl4x4 on September 02, 2009, 12:51:33 PM
how bout this one we were runnin a 605 bbc curt cheany motor
1198 horse before the bottle dyno'd horse on 114 shell gas
and he is right out of hastings , MI
that is one bad mf truck!!!! one hell of a guy that owns the truck too
Quote from: squirl4x4 on September 02, 2009, 12:51:33 PM
how bout this one we were runnin a 605 bbc curt cheany motor
1198 horse before the bottle dyno'd horse on 114 shell gas
and he is right out of hastings , MI
is that raw or rear wheel power? and wat is he runnin for tranny transfer and gears they all take hp away
aint that denny lapoints truck??
Heres the stats on that motor, read the thread pretty interesting..http://forums.minnesotamud.com/showthread.php?t=8804&page=9 (http://forums.minnesotamud.com/showthread.php?t=8804&page=9)
514 big block ford horse power ???????
ya its denny lapoints truck its got
turbo 350 built with a 205 behind
5.13 gears 60 front and narrowed 14 bolt rear
Quote from: JR. on August 09, 2009, 04:38:07 PM
he can field bogg it that truck is ay over built, the best of the best on everything, the guys got some $$$$$$$ he owns one of the biggest junk yards in michigan............. but anyways i gurantee no one can touch sneaky pete.
sneaky pete is stopable its all in the hole shot in the comp boggs
There are some real badasss rigs around!! my goal is to someday have a 540 puttin out at least 700 horses, someday.....
mines currently around 300 right now. ;D
Quote from: Orangecrush on September 03, 2009, 01:51:09 PM
There are some real badasss rigs around!! my goal is to someday have a 540 puttin out at least 700 horses, someday.....
mines currently around 300 right now. ;D
==roll 300
Some people mentioned Denny, Henery and Pat, but no one spoke of Adam's red S-10 Dirty Little Mind
i have only got a 305 but she does the job all roller has a 488 lift cam cast heads my dad hoged out and polished it is in a 85 s10 on a 85 k5 blaver frame and it has 456 gears and lockers on 35's it runs mid to low 4 second range in a two hunder foot pit but i have a 355 wating for the 305 to blow the 355 has 500 lift cam 302dration 305 heads that have had a lot of work done on them its also roller i just like small blocks and every now and then i get to bet up on a big block
Quote from: MUDRACER2007 on August 01, 2009, 03:21:58 PM
I HAVE A 540 CI BBC IN MY BOGGER ABOUT 800 PONIES. IT IS CURRENTLY FOR SALE ALSO IVE GOT 17,000 INTO IT AND I WOULD TAKE 10,500. IT IS IN THE LIGHT BLUE S-10 THAT JUST GOT PAINTED.
this one? had to go diggin for that one lol
(http://i54.photobucket.com/albums/g101/taurus_dude/bogs%20and%20stuff/IMG_0760.jpg)
What about Adam Elsesser's Dirty Little Mind? I have yet to see a truck beat it. ==rf
llil barn stormer bronco was pretty bad
im just hoping that when i put my 540 in my new mud truck it will keep up with them guys.. ???
http://www.facebook.com/home.php#/photo.php?pid=30601229&id=1552143635
Quote from: Mud Rebel on November 15, 2009, 05:09:02 PM
What about Adam Elsesser's Dirty Little Mind? I have yet to see a truck beat it. ==rf
what about adrenaline
Quote from: Squirell on November 16, 2009, 03:54:55 PM
Quote from: Mud Rebel on November 15, 2009, 05:09:02 PM
What about Adam Elsesser's Dirty Little Mind? I have yet to see a truck beat it. ==rf
what about adrenaline
Yes Ive seen adrenaline beat him at Ionia
Quote from: bluechevy11 on November 16, 2009, 07:44:44 PM
Quote from: Squirell on November 16, 2009, 03:54:55 PM
Quote from: Mud Rebel on November 15, 2009, 05:09:02 PM
What about Adam Elsesser's Dirty Little Mind? I have yet to see a truck beat it. ==rf
what about adrenaline
Yes Ive seen adrenaline beat him at Ionia
Not making excuses for Adam, but he broke a rear axle shaft at Eagle the weekend before Ionia and did not know it. Still went out the door in 35's and 40's in three wheel drive.
what about perkins bronco? ive heard that truck is pushin some pretty big ponys. it does rip some p00
Quote from: bigdogford on November 25, 2009, 03:53:40 AM
what about perkins bronco? ive heard that truck is pushin some pretty big ponys. it does rip some p00
stroked out 460 is what ive heard. a friend and i talked to him for a few at a bog and he said that he'd had it sittin around for awhile
eric klos in da judge 706 cubic inch 1300 + ponies his other car rapid transit did have a 632 both cars are record holding mud drag cars then i theres a guy out of otisville with a yellow jeep scrambler 689 cubic in bbc also record holding drag jeep
its sad he realy dont race da juge or rapid anymore....the yellow jeep travels with another jeep looks just like it and they go all over the place for races... they got some for real money in them
Perkins has a 514 big block ford in the bronco.. I on the other hand don't have anything that big but I have a 468 bbc with 14:1 compression.
oh yea forgot about barn stormer. havent seen that truck in forever! was a bad little rig.
has anybody see the mud drag car "overtime". i heard 572 all aluminum bbc with a 1471 blower sittin on top with ALOT of nitrous.
what about bob's 'RAT ON CRACK' thats a bad ass truck!
barn stormer was parted out ,and sold
Quote from: boggnass10 on December 03, 2009, 04:59:42 PM
barn stormer was parted out ,and sold
as of when??? this spring he was still working on it!! he lives about 15 mins from me and boggs with us once or twice a year with his beater...
overtime is a nice running drag car.. along with rolling thunder, californa shaker...rat on crack is a good running truck dont see it very much..seen it roll a year ago at the mio mud bog.. put her right on her side
Quote from: betterbeaters on December 03, 2009, 05:05:14 PM
Quote from: boggnass10 on December 03, 2009, 04:59:42 PM
barn stormer was parted out ,and sold
as of when??? this spring he was still working on it!! he lives about 15 mins from me and boggs with us once or twice a year with his beater...
that was what I was told , is he the original owner , builder it's a bad ass bronco
Quote from: boggnass10 on December 04, 2009, 08:14:30 PM
Quote from: betterbeaters on December 03, 2009, 05:05:14 PM
Quote from: boggnass10 on December 03, 2009, 04:59:42 PM
barn stormer was parted out ,and sold
as of when??? this spring he was still working on it!! he lives about 15 mins from me and boggs with us once or twice a year with his beater...
that was what I was told , is he the original owner , builder it's a bad ass bronco
wow I heard they were redoing the whole thing for next year I'll have to stop over at martins lawn to see whats up....
Quote from: middleroadBOB on December 02, 2009, 11:30:31 PM
what about bob's 'RAT ON CRACK' thats a bad ass truck!
YES HES STILL OUT JUST WATCHIN TO SEE WHOS DOING WHAT
JUST TALKED WITH HIM TODAY IN FACT
Quote from: badhabit on November 30, 2009, 04:14:20 PM
its sad he realy dont race da juge or rapid anymore....the yellow jeep travels with another jeep looks just like it and they go all over the place for races... they got some for real money in them
[/quote\] yeah i heard eric bought a house so he hasnt been able to run da judge and he parted out rapid transit to keep da judge running the jeeps are dave crwford hookin n bookin and art nelson bounty hunter 2 http://www.youtube.com/watch?v=gQ5unwVIjzs
http://www.youtube.com/watch?v=y-N5AfhFa3w http://www.youtube.com/watch?v=bXZVfa79_so http://www.youtube.com/watch?v=kReo2gdjMHo
anyone got any vid of sneaky pete?
i know a guy that knows a guy that knows a guys wife that she said her husbands frind said his frinds dad said his exwifes new man uncale has a bad motor its so bad they haid it to the scrap HAHAHAHA LOL LOL
to bad i grew up across the road from them cars i was metioning woring on them building them not knowing someone who knew someon who knew some one
whoa someone took a joke the wrong way
no i didnt take it the wrong way was just letting him know cause is is post on this thread that are i know this person who knows this person who knows this person so i was just clearing it up
does barn stormer not do any moms motor sports events anymore??
havent seen the barnstormer truck in a while.
was told barnstormer is gone :(
dang that sucks would have loved to see that truck run
when my dad and i were into mud racing we had a 32 vicky mud rail taht we used to race it had a 604 chevy ran on nitrous and alcohol, it ran 950 hp without the bottle and 1125 hp with the little blue pill, sold the car but the motor sits in the garage on an engine stand but its going into his mud buggy "TWISTED DESIRE" for the 2010 bog season
Quote from: erikmud on December 21, 2009, 03:38:20 PM
when my dad and i were into mud racing we had a 32 vicky mud rail taht we used to race it had a 604 chevy ran on nitrous and alcohol, it ran 950 hp without the bottle and 1125 hp with the little blue pill, sold the car but the motor sits in the garage on an engine stand but its going into his mud buggy "TWISTED DESIRE" for the 2010 bog season
.
I'VE BOGGED WITH YOUR DAD A TON.... LOVE THE BUGGY IT RIPS CANT WAIT TO SEE THE BIGGER MOTOR!!!
Quote from: betterbeaters on December 21, 2009, 03:48:44 PM
Quote from: erikmud on December 21, 2009, 03:38:20 PM
when my dad and i were into mud racing we had a 32 vicky mud rail taht we used to race it had a 604 chevy ran on nitrous and alcohol, it ran 950 hp without the bottle and 1125 hp with the little blue pill, sold the car but the motor sits in the garage on an engine stand but its going into his mud buggy "TWISTED DESIRE" for the 2010 bog season
.
me too it should rip pretty good and hopefully have the big block in my bronco 2, for next
year but im more excited to see his done its a strong runner as it is
I'VE BOGGED WITH YOUR DAD A TON.... LOVE THE BUGGY IT RIPS CANT WAIT TO SEE THE BIGGER MOTOR!!!
I CANT WAIT TILL SPRING! HOPE TO MEET YOU AT A BOGG TOO!
what was the name of the mud rail??
"TWISTED DESIRE" it was pearl white 32 ford victoria body had a the top of the body on it for a few years then cut it off for more aerodynamic making it more of an alterd body style, and a black tubualar rolling chassis
Quote from: badhabit on December 21, 2009, 05:13:32 PM
what was the name of the mud rail??
i think i got the same pic from copemish ?
lets see them... dont rembered it lol visuals are better lol
not me at the moment, a 305 with smog 350 heads, maby and i mean maby 7.5-1... ==doh
does any one remmeber eye popper 2 bbc 5?? somthing big block with a 14-71 blower 1500 hp it was a mud rail
Had a mild built 406, but not anymore, gonna go bigger with the new motor
Quote from: bigmike on December 02, 2009, 06:36:25 PM
Perkins has a 514 big block ford in the bronco.. I on the other hand don't have anything that big but I have a 468 bbc with 14:1 compression.
Isnt the new one a 600 something?
yea i believe a 604
The motor in the explorer is a 600 with what I was told to be around the 1000hp range..
any chance of all these motors I hear about got any plans on coming out to be seen. Like at Baycity or Millington or is this a talk about what we have in the corner thing lets run um i hear theres a few 600 700 CID GOING TO BE THERE
I got a 700 cid, its just that its split up in 2 different trucks right now, 350 in each one.. ;D
lol
both bay city and millington should be good
I have a 5.9L Cummings, pushing about 500hp and a p00 load of torque. I may not win the power thing just yet, but might get extra smiles when it blows black smoke from the through trunk lid mounted chrome stacks.
sweet
def not me but i got a 476 bbc right now. kinda sucks that i just put it in before winter so i only got a few days of running. so i cant wait for spring time
there is a sweet 540 bbc forsale that would kick ass at the bogs......
once again I got a small BBC....... ;)
not me but i did get 695 hp out of my 461 bbc
Quote from: D60KING on December 25, 2010, 01:45:53 PM
not me but i did get 695 hp out of my 461 bbc
Nice! And dyno sheets to back it up!
yup cool but the dyno sheet was dated from 99 i hope it still runs good for ya
Quote from: D60KING on December 25, 2010, 01:45:53 PM
not me but i did get 695 hp out of my 461 bbc
for being 12 years ago thats bad engine
yes on that
Quote from: bigmud44 on January 08, 2011, 08:10:24 PM
Quote from: D60KING on December 25, 2010, 01:45:53 PM
not me but i did get 695 hp out of my 461 bbc
for being 12 years ago thats bad engine
Quote from: BIG DOG on January 08, 2011, 07:32:59 PM
yup cool but the dyno sheet was dated from 99 i hope it still runs good for ya
yes it has a very good motor ! ran it in my short box for 7 years never had a problem ! it was all in the knowing what the limets of it & changing a lot of oil !! everytime it wen't out it had new oil in it, & plugs & I ajusted the valves, & all good for a long time of beating, I just opened it up about a year ago, and still look like new in side. very happy with it.
im thinking Wildtime now!!!!
There are a lot of big motors out there people don't know about....or they hide it...lol
Quote from: 4-play on January 10, 2011, 12:11:06 AM
There are a lot of big motors out there people don't know about....or they hide it...lol
That is true....once you get a good running motor.....people always ask for specs of it.....cant give them all out loll
Quote from: homewrecker john on January 10, 2011, 12:18:03 AM
Quote from: 4-play on January 10, 2011, 12:11:06 AM
There are a lot of big motors out there people don't know about....or they hide it...lol
That is true....once you get a good running motor.....people always ask for specs of it.....cant give them all out loll
boy isn't that the truth
Quote from: MUDBOY on May 13, 2009, 10:41:23 PM
i win i have a 6.5 hp briggs
lol i was going to say i have a 2 horse brigs and stratton
i got a 77chevy custom deluxe with a 355 turbo400 trans and a 208transfer case 350ish horses and high high 400's for torque
Quote from: homewrecker john on January 10, 2011, 12:18:03 AM
Quote from: 4-play on January 10, 2011, 12:11:06 AM
There are a lot of big motors out there people don't know about....or they hide it...lol
That is true....once you get a good running motor.....people always ask for specs of it.....cant give them all out loll
why? what is the big secrete, I don't get why people think it is a big deal to let people know what you got. who realy cares if someone knows, should be happy to brage about a bad ass motor, so what if someone makes one like what you got ? more power to them ! if thay copy you, should be proud of it, even help them out if you can. hell i would no big deal! COME ON HELP A BROTHER OUT !! but what the hell do i know !!!!! just my 2 cents,
Quote from: D60KING on January 27, 2011, 02:04:28 PM
Quote from: homewrecker john on January 10, 2011, 12:18:03 AM
Quote from: 4-play on January 10, 2011, 12:11:06 AM
There are a lot of big motors out there people don't know about....or they hide it...lol
That is true....once you get a good running motor.....people always ask for specs of it.....cant give them all out loll
why? what is the big secrete, I don't get why people think it is a big deal to let people know what you got. who realy cares if someone knows, should be happy to brage about a bad ass motor, so what if someone makes one like what you got ? more power to them ! if thay copy you, should be proud of it, even help them out if you can. hell i would no big deal! COME ON HELP A BROTHER OUT !! but what the hell do i know !!!!! just my 2 cents,
X2
Starting a 408 Stroker Shhhhh it's a secret. 1969 351w, square decked, race prepped. Scat Steel 4.00" Crank, 6.20 Alum. GRP rods. Diamond Forged .040 slugs, King Race Bearings. Cloyes Gear drive. Custom Ground Cam.
This should be a little screamer. Not the biggest, but all the best.
300 straight six, rated new at about 145 rear wheel hp ;D
Quote from: 300inlineFord on February 09, 2011, 02:12:06 PM
300 straight six, rated new at about 145 rear wheel hp ;D
I got one for ya in a 1980 F250 4x4 4.9 & NP435
I just built a buick 455 only tested a couple of times. Have not dyno but want to. big cam. 60 over on pushrods. 30 on motor studded lower, not sure what heads but dual valve springs hardened seets 4" aluminum high rise single plain intake forged pistons and rodss 670 holley and custom headers.
Was told 550 maybe 600 hp
I am building a 572 bbc.....will be on dyno when done.
Quote from: 4-play on February 09, 2011, 08:47:42 PM
I am building a 572 bbc.....will be on dyno when done.
badass!
Quote from: Broncoholic on February 09, 2011, 06:37:21 PM
Quote from: 300inlineFord on February 09, 2011, 02:12:06 PM
300 straight six, rated new at about 145 rear wheel hp ;D
I got one for ya in a 1980 F250 4x4 4.9 & NP435
one of the best motors ever made in my opinion they dont dont make much power but the torque is amazing
Quote from: 300inlineFord on February 10, 2011, 02:43:30 PM
Quote from: Broncoholic on February 09, 2011, 06:37:21 PM
Quote from: 300inlineFord on February 09, 2011, 02:12:06 PM
300 straight six, rated new at about 145 rear wheel hp ;D
I got one for ya in a 1980 F250 4x4 4.9 & NP435
one of the best motors ever made in my opinion they dont dont make much power but the torque is amazing
Dam thing pulls like a Diesel on the hwy. Plus 20 Plus Mpg.
well i got a 16 horse craftsman with chains will push a foot of snow . so beat that lmao. all just as good as they are built
Quote from: 4-play on February 01, 2011, 08:08:10 PM
Quote from: D60KING on January 27, 2011, 02:04:28 PM
Quote from: homewrecker john on January 10, 2011, 12:18:03 AM
Quote from: 4-play on January 10, 2011, 12:11:06 AM
There are a lot of big motors out there people don't know about....or they hide it...lol
i agree yet disagree, since most of you probubly run for fun then why not say your specs but if your runnning for competition people dont need to know what you have under your hood
That is true....once you get a good running motor.....people always ask for specs of it.....cant give them all out loll
why? what is the big secrete, I don't get why people think it is a big deal to let people know what you got. who realy cares if someone knows, should be happy to brage about a bad ass motor, so what if someone makes one like what you got ? more power to them ! if thay copy you, should be proud of it, even help them out if you can. hell i would no big deal! COME ON HELP A BROTHER OUT !! but what the hell do i know !!!!! just my 2 cents,
X2
just add this nunder my quote
i agree yet disagree, since most of you probubly run for fun then why not say your specs but if your runnning for competition people dont need to know what you have under your hood
Quote from: Bigolcummins on February 15, 2011, 06:16:21 PM
just add this nunder my quote
i agree yet disagree, since most of you probubly run for fun then why not say your specs but if your runnning for competition people dont need to know what you have under your hood
True also
Quote from: 4-play on February 15, 2011, 06:28:57 PM
Quote from: Bigolcummins on February 15, 2011, 06:16:21 PM
just add this nunder my quote
i agree yet disagree, since most of you probubly run for fun then why not say your specs but if your runnning for competition people dont need to know what you have under your hood
x2
True also
i got this biggest motor on my bike, its my 2 feet, can get me through anything i need to go through and can make some weird noises at the top end.
CAN WE GET THIS POST REMOVED AND MAYBE A NEW 1 12 PGS OF IN LINE 6'S AND BRIGS AND STRATON
Quote from: BIG DOG on February 17, 2011, 02:18:35 AM
CAN WE GET THIS POST REMOVED AND MAYBE A NEW 1 12 PGS OF IN LINE 6'S AND BRIGS AND STRATON
x2
cant help it keep reading thinking someone came up with a mike moran-sonny leonard-reher morrison- insert builder your in awe of here-you know the guys build engines us mere mortals can only dream of 8) ;D applaudd
Quote from: Bigolcummins on February 15, 2011, 06:16:21 PM
just add this nunder my quote
i agree yet disagree, since most of you probubly run for fun then why not say your specs but if your runnning for competition people dont need to know what you have under your hood
i new an old racer who put locks on his hood instead of hood pins, when he won he would just load it up and go back home laughing at them for wanting to see it
Quote from: midnightmudder on February 18, 2011, 03:33:53 AM
Quote from: Bigolcummins on February 15, 2011, 06:16:21 PM
just add this nunder my quote
i agree yet disagree, since most of you probubly run for fun then why not say your specs but if your runnning for competition people dont need to know what you have under your hood
i new an old racer who put locks on his hood instead of hood pins, when he won he would just load it up and go back home laughing at them for wanting to see it
kinda sounds like a jerk move, if i had something that would do that, i would show it off.
[/quote] i new an old racer who put locks on his hood instead of hood pins, when he won he would just load it up and go back home laughing at them for wanting to see it
[/quote] in this day & age you would only pull that once and you would not get paid
I don't
Quote from: bigmud44 on February 21, 2011, 01:44:17 PM
i new an old racer who put locks on his hood instead of hood pins, when he won he would just load it up and go back home laughing at them for wanting to see it
[/quote] in this day & age you would only pull that once and you would not get paid
[/quote]
yep you would be disqualified.
Quote from: moparmudman on February 21, 2011, 05:45:47 PM
Quote from: bigmud44 on February 21, 2011, 01:44:17 PM
i new an old racer who put locks on his hood instead of hood pins, when he won he would just load it up and go back home laughing at them for wanting to see it
in this day & age you would only pull that once and you would not get paid
[/quote]
yep you would be disqualified.
[/quote]
for wanting to keep a secret of what you have under the hood? i am sure people would frown on you for it but i highly doubt anyone would get disqualified
Most say inspections before race, which means you have to open the hood to show your following the rules, if he is not doing that, well disqualified.
obviously if its the rules before the race, but if there is no rule about it then it dosnt matter anyways
You have the right to claim a winners motor in racing. Pay him the cost to tear it down. If he's caught cheating you get his motor for that price or e has the right to be dq and leave with no winnings. So either the guy was a cheater or your telling stories.
can we add tq into it for us diesel guys hahaha! poor little 6cyl dont make lots of hp, but 1200lbs makes up for is sometimes ??? ;D
he did not care if he got paid he just liked going out ther eto win he was an old racer72 years young.never got paid 2nd place got the money he just got a laugh
it wouldnt be hard to beat the other guys if you were playing outside the rules
herd about some really bad ford motors
Quote from: 355REDNECK on April 02, 2011, 03:13:48 AM
herd about some really bad ford motors
and one baddddddd steve smidt engine gonna be good year for fast trucks
Quote from: bigmud44 on April 02, 2011, 02:22:32 PM
Quote from: 355REDNECK on April 02, 2011, 03:13:48 AM
herd about some really bad ford motors
and one baddddddd steve smidt engine gonna be good year for fast trucks
who has it