furl injected 454.th350np205 4.88s..these are when my dad was still running her in the 70's lol and for the older guys on here....were them short shorts ever cool LMAO ==roll ==roll ==roll ==roll ==roll ==roll a=f a=f going with a big block just picked up a 454
all broke down getting ready for the sand blaster 30 years later
fairely clean tub for her..
all blasted and ready to start going back together..
getting tired of working had to go in and chill with my 72 pound lap dog
getting there for sure..
one thing please put a cross brace in the shackles to stop em from folding. lookin good tho
Quote from: Flat_Black on July 29, 2010, 03:25:20 AM
one thing please put a cross brace in the shackles to stop em from folding. lookin good tho
like you mean weld them together?in the middle?
weld a wedge in the middle or drill a hole in both sides and use a grade 8 bolt and a piece of round stock as a shime to prevent the shackle from folding up and causing you to crash. im just tryin to help out not being rude or anything im just give ya some advice
(http://www.4crawler.com/4x4/ForSale/Images/ShackleBraced.jpg)
no not thinking your being rude at all..actually thank you i will do that then..id hate something little and stupid to be my demise and that would do it
ya iv been there done that and it sucks alot...
thanks again
I think its cool its been in your family that long applaudd
Quote from: bigmud44 on July 29, 2010, 06:03:20 AM
I think its cool its been in your family that long applaudd
x2
looks great! nice ram charger in the back ground lol I think I have seen that run before!
Quote from: cookies and milk on July 29, 2010, 11:59:17 AM
looks great! nice ram charger in the back ground lol I think I have seen that run before!
ya alex thats brian beagles ram chARGER
Quote from: bigmud44 on July 29, 2010, 06:03:20 AM
I think its cool its been in your family that long applaudd
Quote from: chevroletj5 on July 29, 2010, 03:41:58 PM
Quote from: cookies and milk on July 29, 2010, 11:59:17 AM
looks great! nice ram charger in the back ground lol I think I have seen that run before!
ya alex thats brian beagles ram chARGER
I know wish he was still living around here so we could wheel at his dads swamp!
Quote from: bigmud44 on July 29, 2010, 06:03:20 AM
I think its cool its been in your family that long applaudd
I kinda wonder if my truck will be around when my son is older. cool jeep for sure!
Lookin good!
Quote from: cookies and milk on July 30, 2010, 11:51:35 AM
Quote from: chevroletj5 on July 29, 2010, 03:41:58 PM
Quote from: cookies and milk on July 29, 2010, 11:59:17 AM
looks great! nice ram charger in the back ground lol I think I have seen that run before!
ya alex thats brian beagles ram chARGER
I know wish he was still living around here so we could wheel at his dads swamp!
he had to get away ...he got married...never though brian would get married...but that familys mostly drama now lol....JEFF IS WHY.ya that swamp out back was nasty man
still dont have this thing done yet? it has definitely came a long way since i last saw it
ya corey its grown alot..i dhoulf have it at the bad azz expo hopfully
thats one of the best swamps around!!!!! still wish we could play there!
current look.. ++peace ++peace ++peace ++peace ++peace cant go wrong with flat blackkk
got fenderwell headers on it..sbc 510. cam.vortech heads.stock lower end.new bearing.performer rpm 1''carb spacer holley 650..2500 stall th350 b&m shift kit...4.10s ..soon to have a lincoln locker in the rear... a=f a=f a=f a=f a=f
cant wait to see it run
oh and you need a roll bar!!
roll bars are for girls lol...jp i got a full cage..and i got everything in it but rear dshaft and ladder bars now..idk how them springs are gonna hold up i guess i should find outt on the 23rd..all i got left to do is throw the cage in..throw the windsheild on.run 1 wire to my electric fan toggle switch.rear dshaft.and timing and carb tuning..like one more weekend worth of work to take it out a kill it in carson lol]
o ya and put new sterring wheel on it cause the one thats on it is rusted right threw!!!
==censor ==censor ==censor ==censor
sweet cant wait to see it out there!
yep..and chris just killed his 10 bolt so ima get his old one and have some spare shafts!!!!!so i aint skeerd to break nothing!!
Lookin Good Man!
them headers work good for ya then
sweet
Quote from: gwilliams on April 12, 2011, 07:50:22 PM
them headers work good for ya then
yep sure did....they work good on catchin my jeep on fire toooo lol..i gotta put turn downs on them..but they clear my sterring shaft and brake bosster and tires...so im golden....thanks...and thats every one else
Lookin good!
I've seen that banshee at the falors a couple times....that's a good whole back in there too bad we can play back there anymore...
looking good
yeah...i got rapped on that banshee...bad...scumbags low lifes off craigslist.and thanks everyone else..hoping to get it compltely done within a week or so..its like 98%
looking good !!
was it really hard to put chevy drivetrain in?? about how long is ur rear dshaft?
the chevy swap was easy...i couldnt use a slip yoke 208 like i wanted.was to long of a set up . so i had to go with a np205 bolt on.also the 14bolt has a shorter pinion then any other ff axle.i moved my engine ahead about 4 inches..plenty of room since its was designed for a ong straight 6.also delted the fan and used electric ones that only stick out about 1.5 inches from the radiator..my water pump pulls only about 3 inches from my radiator..i used a 2core ugrade for the 304s in myn.the lower radiator hose is on the opposit side of chevy so it dumps down off the water pump.down under harmonic balencer and p to the lower radiator tube.the transmision i just fabed a mount from a random mount i had.the front drivetrains good with no binding with stock perches.my rears gonna be very short.im building it this weeknd.i can get demesions then.the dff is at a upward angle..it may burn up bearngs but shouldnt be to bad..i am going to have to go with 1410 yokes and ujoints to allow for more driveshaft angle.as far as mounting the suspsnion goes.the front end is a corp 10 bolt.pin hole to pin hole is 31.5 inches aprt and its got a lil room for error .one of the pin hoels is kind of oblonged.i put chevy springs in the front of myn 4'' soft rides.....i kept my shackels up front so it does turn the pinion up a tiny bit to help withthe driveline angles.so i used the factor shackel hanger and bushing off the jeep and welded it to a stell 2x4 thats welded and reinforced with angle iron to the front of the frame..im also going ot weld a 2 inch tube on this bar for pull out.in the rear solid mounts of the FRONT end i just welded a chuck of steel 2x4 to the bottom of the frame and reinforced it with 45degree gussets that go up to the top of the frame.its not pretty cause it was all out of stuff i had around but woulnt be hard to make more cosmeticly nice.in the rear i got the 10.5 14bolt ff from a 8o's 3/4ton k2500 suburban with 4.10s..ive seen guys just sread the spings out and put them on the factory perches..but i found out on myn it works best to get new perches and they fit perfect inbetween the factory perches.all i have for lift in the rear is add aleaf.turn over.2'' block and lift shackels..frotns chevy 4'' soft rides with lift shackels....i can take better pics of the mounts and stuff and maybe some demensions if your looking at doing a simular build..if i had one thing i would do dirreretn its crossover sterring..i got the old style and it sucks!!!!!!!!!!!!!bump steer really bad.and as far as transmisonion and tcase go..i just threw a b&m ratchet shift in it..and the tcase just took a sawzaw and cut a hole for it to move in and hopefully can just throw a rubber or leather boot over it so it looks better...also the whole trucks wired turn key..only thing on a switch is the elctric fans.i also recromend anyone get the one peice dlip front end like i got it makes it so easy to work on..and also.since i moved my engine up so far i dont even have to get undeer it to get to trans bolts to pull the engine..can swap a engine in about 45 minutes pretty easy!!!!!!!!!!
got any new pics
can prolly get some this weekend..but its looks like the last ones i uploaded
well i took a half dozen pics on my phone and it says the image is to large to send..damn....hers looking good tooo!!!!!!!!!still looking like im only scedual and should run at carson city hopefully saturday
1310s suck!!!!!!!!!!!!!no angle at all...need 1410s.....
trans mount..
bnh
98% done!!!!!!!!!!!!!!!!!!!!!!!!!!!!! i need race seats with harnesses.ladder bars.and tuning...tuning should be done tomarrow!!!!!!!!!
few more
your steering wheel is on the wrong side of the jeep! :D
Quote from: mudboggshirts on April 26, 2011, 04:18:23 AM
your steering wheel is on the wrong side of the jeep! :D
lmao.....
yours could look like this too DEBBIE
;D someday when it grows up! ;) ;D
anymore progress? i might have to take a road trip and come out and check this thing out might be buying a cj5 here soon for 300 bucks
forgot to tighten down front leaf spring bolt...got excited when it fired up and went to play lol ++peace ++peace
.
<object width="400" height="300" ><param name="allowfullscreen" value="true" /><param name="movie" value="http://www.facebook.com/v/226504977390242" /><embed src="http://www.facebook.com/v/226504977390242" type="application/x-shockwave-flash" allowfullscreen="true" width="400" height="300"></embed></object>
<object width="400" height="300" ><param name="allowfullscreen" value="true" /><param name="movie" value="http://www.facebook.com/v/226497514057655" /><embed src="http://www.facebook.com/v/226497514057655" type="application/x-shockwave-flash" allowfullscreen="true" width="400" height="300"></embed></object>
<object width="400" height="300" ><param name="allowfullscreen" value="true" /><param name="movie" value="http://www.facebook.com/v/226496167391123" /><embed src="http://www.facebook.com/v/226496167391123" type="application/x-shockwave-flash" allowfullscreen="true" width="400" height="300"></embed></object>
<object width="400" height="300" ><param name="allowfullscreen" value="true" /><param name="movie" value="http://www.facebook.com/v/219277708112969" /><embed src="http://www.facebook.com/v/219277708112969" type="application/x-shockwave-flash" allowfullscreen="true" width="400" height="300"></embed></object>
<object width="400" height="300" ><param name="allowfullscreen" value="true" /><param name="movie" value="http://www.facebook.com/v/219280208112719" /><embed src="http://www.facebook.com/v/219280208112719" type="application/x-shockwave-flash" allowfullscreen="true" width="400" height="300"></embed></object>
==dontwannaseeit oops
Quote from: ProGrade on July 22, 2011, 04:08:38 PM
==dontwannaseeit oops
all over a 1 dollar bolt lol..costed em 2 drive shafts..bent one header.the front driveshaft was savable just ripped it out of the splines when the axle went like a foot ahead of the jeep...the rear shatterd tho...and ill have you all know it wasnt my welds or anything i did that broke lmfao
can someone tell me if them video links are working?
vids are working little buddy!
ladder bars.race seats.gauges.weld rear end.permentently mount fuel tank.new rear dshaft.dshaft loops and shes ready to rock
over the winter tho comes 4.88's and alumnum heads and full roller......depending on how much snow i got to push.
I like your profile picture! ;D Nice Jeep!
thankssss
u going to bog it this weekend
vids wont work for me
cant watch vids either, edit them for everyone 2 c, i thnk u got them set to just friends?? would like 2 c em
maybe they are working now?i may have to try ato add them to youtube or you can just look me up on facebook. tre' mcginn
not boggin this weekend..have a buddy throwin a nasty bogg just for friends and i dont want to break for that thats like next weekend.it already gone threeww 2 motors lol...so its down to a bolt on stock motor.
in the videos runnin up the grand am the rear shafts not hooked up its broke
a=f a=f ==np ==np ==np ==np ==np
Quote from: chevroletj5 on July 25, 2011, 04:27:10 AM
not boggin this weekend..have a buddy throwin a nasty bogg just for friends and i dont want to break for that thats like next weekend.it already gone threeww 2 motors lol...so its down to a bolt on stock motor.
WHAT KINDA NASTY BOGG AND WHERE AT?
private bogg..i just dont wanna be broke b4 it
I hear that! I love them small swamp boggs!
can any one tell me if the vids are working now if your not my friend on fbook
is it time to get muddy yet? lol hope to make a bogg with you this summer again!
im thinkin ythe truck show in ionia i should be at !!!i am gonna be in new york till the 19th.then come back and get a rear drivshaft and buyuild ladder bears for it.and throw race seats in it..i drive it all the time in front wheel drive now.some i got a good power plants and tranny finally!!!!!!!!!!!!!!!been threw 3 motors and 3 trannys and never left my property lmfao!!!!!!!!!
if I am lucky I will in at the expo sunday but not looking good now...... stupid weddings! hope to see this thing in action soon!
yeah fianlly got a setup that seems to be holding up!!but if not at the expo ill see you at abogg..i just quit my job so i got nothing but time!!!shell be done within a weeek of me being back from new york
new paint.new ladder bars.4.88s in.welded rear end.race seats.many updates pics soon!
n
h
e
Your jeep needs these...
http://wegotmud.com/forum/index.php?topic=80639.0 (http://wegotmud.com/forum/index.php?topic=80639.0)
WOULD LOOK COOL!! BUT NOT SURE THE TEN BOLT UP FRONT WOULD LOVE EM LOL!'
J
J
PULLING THE BIG TRACTOR OUT OF THE MUD
New paint looks good !!
thanks shes a ten footer for sure lol
just picked up a 454 today!!!!
well now its got a fuel injected 454.4.88s welded rear hydro steering and 44 boggers on aluminum wide 5 bead locks..funny how these prjects never end.next year hoping to get a much more stout big block.need to build a solid cage this winter.and tie it into the frame so it cant twist at all
Heck yeah sounds like it should run nice hehe