changing my 95 yukons 350 tbi over to carburated soon. anybody have anytips that could help me out? and looking for some parts to do this swap also. thanks
you can drill out an old carb'ed intake to fit on the new heads. i wouldnt, i buy the right intake, both you can do either. take out that distributor, and put in a hei coil in cap. i think thats it. oh and ya gotta figure something out for fuel, carb runs ~6-8, tbi runs at 14? psi i think.
Why are you doing this?
I'll take everything tbi if you just taking it off!
$150 on summit, brand new TBI to Carb intake.. no dickin around or nothin!
http://www.summitracing.com/parts/WND-8170/ (http://www.summitracing.com/parts/WND-8170/)
i have a summit intake for sell. that will do that for you. $100.00 for it.
did this with my firebird,your gonna need a fuel pressure regulator with a return on it, and your either gonna need the intake that'll fit those heads or swap the heads out for better heads and then you can use a lot bigger varity of intakes, your gonna need a hei distributor (just get the summit black cap one their good and cheep) and your gonna need a good carb, edelbrock 1405 or 1407 will work preaty good for ya depending on how high ya wanna rev it