Hey guys,
I recently converted from half ton rear axle to a 14 bolt FF. 10.5" ring and 4:88 gears.I need a u-joint that will be sized for my stock drive shaft on one side and fit into the 1350 pinion yoke on the axle. My question is more of a "where have you seen this part available" and does anyone have a part number? I'm having a tough time finding them. Thanks
carquest, mureys, just about anywhere will have them
if its a long and a short try a 1-134. take the yoke in with ya if ya can. and the drive shaft
Quote from: Ranger Dave on July 17, 2011, 09:51:35 PM
carquest, mureys, just about anywhere will have them
if its a long and a short try a 1-134. take the yoke in with ya if ya can. and the drive shaft
Thanks RD. I'll check into that!!
I got mine at auto value in lansing, combo joints are like $30.
Dynotech in troy has spicers for like 30bux
automotive machine shop on dort hwy in flint can get and the # fairhaven in mt morris also .
Thanks for the info. guys. I'm also wondering if that would be like a 1310 to 1350 combo? Sounds about right.
Yep
advance auto parts any auto stores i got that yoke off for ya
Quote from: OHEARN.2012 on July 18, 2011, 03:44:39 AM
advance auto parts any auto stores i got that yoke off for ya
I'm meeting up with puddlejumper tomorrow, he's coming down from that way...might be able to bring that yoke down. with him. Thanks for the info too
ill look it over and give ya some more detail on it and get a pic i work all day today so idk wats goin on
Quote from: Trent on July 19, 2011, 10:18:09 PM
i get mine at suburban auto right in town, just take the driveshaft with ya and the yoke so ya make sure ya get the right one
they know their stuff