Print Page - 208 vs. 241 tcase

Title: 208 vs. 241 tcase
Post by: Crazymays77 on August 18, 2011, 08:41:34 PM

What is the diff between the 208 and 241 tcase? I have a 208 in the tracker now and I'm getting a trans with a 241 attached. Is the a difference?

Title: Re: 208 vs. 241 tcase
Post by: betterbeaters on August 18, 2011, 09:01:10 PM

241 has a little lower low range 2.72 vs 2.62 I think and I was aways told the 241 was stronger to.. I ran a 208 in my bogger before and now run a 241 both work great and held up to my big motors and lead foot!! lol

Title: Re: 208 vs. 241 tcase
Post by: Crazymays77 on August 18, 2011, 09:22:31 PM

Ok my main thing was spline count on output shaft.

Title: Re: 208 vs. 241 tcase
Post by: Crazymays77 on August 18, 2011, 09:24:02 PM

Ill hang on to it for a spare

Title: Re: 208 vs. 241 tcase
Post by: betterbeaters on August 18, 2011, 09:30:38 PM

I had the 208 and the 241 on a 350th and both came off 700r4s and used the same drive shafts for both

Title: Re: 208 vs. 241 tcase
Post by: Crazymays77 on August 18, 2011, 09:47:52 PM

Ok thanks for the help

WeGotMud

Projects & Parts => Garage/Tech => Topic started by: Crazymays77 on August 18, 2011, 08:41:34 PM