this is my truck i m sure most of u have seen but wondered what happened to it , i still have it just the motor lost oil pressure and i parked it since , still starts and run but i have a brand new motor approx 500 hp for it , but i bought another 460 to throw in so i can bog with it , the 500 hp will go in when it go under the knife again when i throw the rocks under it which i have.
And for the name is because my last name is Beaver . ;D
(http://i27.photobucket.com/albums/c161/beaver22/F250.jpg)
Anyone ride the truck ll have all kind of std,vd, or clap lol
Throw the big motor in it man!
nice looking truck
got few done ,,, got rid of the bad motor put another one in . switched the power window n lock for a manual one and got new leaf springs. rolling the rocks under it soon so i can play w the big boys ..
(http://i27.photobucket.com/albums/c161/beaver22/leafspring.jpg)
hey i remember that truck when you got it stuck in vasser or millington and nobody could get it out . me, herb and mudman went all the way out there to pull it out .herb broke 2 rear axles trying to get it out for you .good times!
Nice truck!
That was nice of u guys!
Quote from: 'the DON' on February 04, 2012, 12:57:41 AM
hey i remember that truck when you got it stuck in vasser or millington and nobody could get it out . me, herb and mudman went all the way out there to pull it out .herb broke 2 rear axles trying to get it out for you .good times!
Quote from: 'the DON' on February 04, 2012, 12:57:41 AM
hey i remember that truck when you got it stuck in vasser or millington and nobody could get it out . me, herb and mudman went all the way out there to pull it out .herb broke 2 rear axles trying to get it out for you .good times!
funny thing is it was in vassar my my ford's first virgin bog . and i was really STUCK i mean really! i had to leave it overnight and herb and mudman came to the rescue .
now i m going bigger now maybe i can pull others out...
Quote from: 'the DON' on February 04, 2012, 12:57:41 AM
hey i remember that truck when you got it stuck in vasser or millington and nobody could get it out . me, herb and mudman went all the way out there to pull it out .herb broke 2 rear axles trying to get it out for you .good times!
got any pics?
I think I do my Sami pretty much shattered that day trying to pull that broken both driveshaft and snapped both rear leaf spring all at once before that I snapped my winch cable left it there overnight then next day came back to site see it one of my tire had went flat tire overnight I fixed front driveshaft and drove onto trailer with capt j s truck to assist them spend half day trying to get capt j truck out
I ll try find that pix
i know i have some pic i ll try find em
Quote from: Captn. J on February 04, 2012, 02:44:48 AM
Quote from: 'the DON' on February 04, 2012, 12:57:41 AM
hey i remember that truck when you got it stuck in vasser or millington and nobody could get it out . me, herb and mudman went all the way out there to pull it out .herb broke 2 rear axles trying to get it out for you .good times!
funny thing is it was in vassar my my ford's first virgin bog . and i was really STUCK i mean really! i had to leave it overnight and herb and mudman came to the rescue .
randy's house on waterman?
Quote from: marshall on February 05, 2012, 11:19:51 PM
Quote from: Captn. J on February 04, 2012, 02:44:48 AM
Quote from: 'the DON' on February 04, 2012, 12:57:41 AM
hey i remember that truck when you got it stuck in vasser or millington and nobody could get it out . me, herb and mudman went all the way out there to pull it out .herb broke 2 rear axles trying to get it out for you .good times!
funny thing is it was in vassar my my ford's first virgin bog . and i was really STUCK i mean really! i had to leave it overnight and herb and mudman came to the rescue .
randy's house on waterman?
i believe it was brown rd and something .. i think they were being evicted or something they host a bog in a small bbackyard which looks like figure 8 lol
Yeah it was between oak n sheridan rd
this is pic from me proposing to my now wife at Ellis rd bog 3 years ago i believe
(http://i27.photobucket.com/albums/c161/beaver22/marryme.jpg)
i ll add some old pic of me stuck and stuff like that when i find em
moved the rear spring hangers ,, i ll have pic up soon need to start working on it more
got my rear spring in and the axle is under it but i gotta get some stuff to secure it it made a big differnce whoo cant wait .
i ll take a good pic of it with the axle later
(http://i27.photobucket.com/albums/c161/beaver22/higher.jpg)
welded in a front tow point and a heavier duty front bumper so watch out!
(http://i27.photobucket.com/albums/c161/beaver22/higher1.jpg)
not to burn ya but i dont think you will like those springs i bought a set and had about 600lbs of heavier friends jumping in the bed of my truck and the tires were the only thing that moved. i took them back and the guy said they were only made to deflect 1-2in. makes for a stiff ride!! just a heads up
Yeah, shawn took his out cause they also flatten out. Loose lift too, and there way stiff. But man that things sure startin to look pretty effing sick!
after he rode in my samurai i m sure those leafspring wont bother him at all haha
Is the sami super stiff?
add some buggy springs help with down ward travel any way might add some sort of bump stop if it was me thoe
debraked the rear axle and bolted it in yesterday im ll update my pic soon
Quote from: Blazin40s on March 27, 2012, 03:53:50 PM
Is the sami super stiff?
it not super stiff it just has no shocks and rear leafspring is too long that the shackle rested flat under the frame
Quote from: 'the DON' on February 04, 2012, 12:57:41 AM
hey i remember that truck when you got it stuck in vasser or millington and nobody could get it out . me, herb and mudman went all the way out there to pull it out .herb broke 2 rear axles trying to get it out for you .good times!
i thought that was the truck.alota trucks broke trying to pull that out. that truck did run like a beast
Quote from: Captn. J on February 05, 2012, 11:11:51 PM
i know i have some pic i ll try find em
bd has pics of it on here its the brown rd bog he had the next day recovery pics also
i have few pic too i ll try post up here
i found some i know i have mor ebut this so far
(http://i27.photobucket.com/albums/c161/beaver22/brownrd.png)
(http://i27.photobucket.com/albums/c161/beaver22/brownrd2.png)
(http://i27.photobucket.com/albums/c161/beaver22/brownrd3.png)
(http://i27.photobucket.com/albums/c161/beaver22/brownrd4.png)
(http://i27.photobucket.com/albums/c161/beaver22/brownrd5.png)
lookz like a sweet bog and nice truck
Dude you have best bogger name i have heard so far haha
cuz my last name is Beaver and i love it!
those springs are like the ones chuck had and the were so stiff they made the front part of his frame bend up so bad the dis hit the fire wall we talked to another guy had the same proublem heres a pic of his truck if you look close you can see it bent and started too rip his fenders in the center of the wheel well......good luck Woody
He gonna use coil spring up front instead of leaf spring
Quote from: Mudduck on December 06, 2012, 12:09:35 PM
He gonna use coil spring up front instead of leaf spring
very cool
when is the e t for this t be done?
Quote from: 1 ton tj on December 07, 2012, 04:24:04 AM
when is the e t for this t be done?
gonna try be done for the spring if time n money permitted
thats why there called the busy beaver ==coffeee
Did the rear end done and raised front end and it huge especially w roller on it i m sure he ll post pix later
as it sits now ... on rollers fabbing front susp soon .
(http://i27.photobucket.com/albums/c161/beaver22/ford1-1.jpg)
and Santa came :) 18.9 26
(http://i27.photobucket.com/albums/c161/beaver22/ford4.jpg)
Looking good its going to big
How tall are em tires
54-56ish
Looking good!!
Looking good!
just finished debraking the front axles pretty simple ... just need 2 new studs on pass sides and gonna get steel real soon to do the front should be sitting on all 4 soon
Looks good!
i ll update pic soon with front brake removed and getting steel for front anytime soon then weld it up n see how it sits then work on drivetrain ie trans and div t case driveshafts then tires
(http://i27.photobucket.com/albums/c161/beaver22/rockwell3-1_zps8dbc3bcd.png)
(http://i27.photobucket.com/albums/c161/beaver22/rockwell-1_zpscd2d076d.png)
(http://i27.photobucket.com/albums/c161/beaver22/rockwell2-1_zps8ff11df3.png)
work on it last night w Mudduck , gotta 4 link it then do all small stuff whoo looking good
Sweet truck awesome
Great job guys! Truck looks bad ass!! That thing looks like it wants to rip a building down, just sitting there!
bought 2 of those looking for 2 more but here goes
(http://i27.photobucket.com/albums/c161/beaver22/tire_zpsa8b6aed5.png) (http://i27.photobucket.com/albums/c161/beaver22/tire_zpsa8b6aed5.png)
(http://i27.photobucket.com/albums/c161/beaver22/tire1_zpsdb5b73bc.png) (http://i27.photobucket.com/albums/c161/beaver22/tire1_zpsdb5b73bc.png)
wow look at all that tread on them back tires lookin good
hey i rember them beer cans. old traz out new one put in last wensday. truck looks sweet.
working on front tires not mounted but close
(http://i27.photobucket.com/albums/c161/beaver22/ford1-2_zps24794fdc.jpg)
Looking good going to be a beast
now having a hard time deciding what color theme i m going with ...
front view
(http://i27.photobucket.com/albums/c161/beaver22/ford3-1_zps8957504a.jpg)
Oooofff turned out very nice its a monster lol
thinking ford blue or tractor green
Either way its going to look nice but me personally would do ford blue, ive seen alot of john deere trucks lol
Quote from: highbrid on March 18, 2013, 06:21:03 PM
Either way its going to look nice but me personally would do ford blue, ive seen alot of john deere trucks lol
gotta agree with u ..
FORD BLUE
neon pink
blue
BROWN
go to tsc an get some ford blue!!
Dark ford blue
made my bracket for the t case after that gotta figure the 4 link... then the rest
Quote from: Captn. J on March 30, 2013, 04:25:45 AM
made my bracket for the t case after that gotta figure the 4 link... then the rest
Save yourself a ton of time and money and just one link it. That's what this white dodge has. Simple and cheap. I have under $100 into the rear of my jeep.
http://www.youtube.com/watch?feature=player_detailpage&v=Ks2Axc9ZGEM#t=51s (http://www.youtube.com/watch?feature=player_detailpage&v=Ks2Axc9ZGEM#t=51s)
Interesting I'm going to have to look into that myself
One link it? I have to see it for myself
Quote from: Mudduck on March 30, 2013, 08:59:28 PM
One link it? I have to see it for myself
Come on over.
If you go with ford blue get the new ford blue, the old blue is really light. Mine is the new blue
Quote from: highbrid on March 30, 2013, 02:07:35 PM
Interesting I'm going to have to look into that myself
not a safe way to go.
Na I'm already 4 linked lol, but I meant on a research stand point I googled it and its pretty interesting I have to say
Quote from: 1 ton tj on April 01, 2013, 01:08:15 AM
Quote from: highbrid on March 30, 2013, 02:07:35 PM
Interesting I'm going to have to look into that myself
not a safe way to go.
I've got friends that have been running them for years with no issues.
Quote from: TopFist on April 01, 2013, 09:46:59 PM
Quote from: 1 ton tj on April 01, 2013, 01:08:15 AM
Quote from: highbrid on March 30, 2013, 02:07:35 PM
Interesting I'm going to have to look into that myself
not a safe way to go.
I've got friends that have been running them for years with no issues.
post some pic of yours if u can
one driveshaft done gonna modify my yokes on my div t case ... slowly but getting there. will get updated pics
been busy , gonna work on 4 links tonight hope some progress at least also having my 2nd kid in 2 weeks s not gonna help
Congrats on your soln to come addition to your fam! Boy or girl?
a girl came and i havent worked on it since then tonight i did and i fianlly got the front jack off and it s standing on it s own yeahhhhh!!! then welder took a crap wasted time working on that ... but got gas line done
list what i need done before moving it ,
d shafts
limiting straps
weld shock mounts on
brake
i know i m missing all small stuffs closer to being done
applaudd congrats ;D
good deal
thought I ll update I got it done for truck gone wild but wasn't happy w my d shaft angles with the f106 axles and the truck motor took a crap not sure what happened it s internal will tear into it later , on way home from Hale a guy approached us and said he had a 6x6 for sale which I scored a sweet deal , got it has toploaders which I m gonna use and sold the F106's also getting donor truck w fuel injected 460 I m gonna use hoping will be back up again soon
welded up the rear end , got helmet for my front so i can put the links on ..(http://i27.photobucket.com/albums/c161/beaver22/rockwell_zps56c191fd.jpg) (http://s27.photobucket.com/user/beaver22/media/rockwell_zps56c191fd.jpg.html)
donor truck fuel injected 460
[url=http://i27.photobucket.com/albums/c161/beaver22/rockwell1_zps4fd3b0cf.jpg](http://i27.photobucket.com/albums/c161/beaver22/rockwell1_zps4fd3b0cf.jpg) (http://s27.photobucket.com/user/beaver22/media/rockwell1_zps4fd3b0cf.jpg.html)[/URL]
(http://i27.photobucket.com/albums/c161/beaver22/rockwell2_zpsaeb27e42.jpg) (http://s27.photobucket.com/user/beaver22/media/rockwell2_zpsaeb27e42.jpg.html)
Sweet, sorry dint realize my phone dint send
sweet. just give me a text if you guys ever need help.
Any progress on this thing?
Been too cold or busy hanging in barn. But going back there to finish things up. My yellow buggy s getting 454 vortec as well
this poor ford will be on hold for while my jeep s getting tran replaced so i can hit mounds there n there also my yellow buggy s getting 454 swap and etc will be getting a set of R2
Dirty beaver is awesome, seen it today. Turned out great Jody.