need to get my 283 hot tanked and maybe magnafluxed but i didnt know of any good machine shops near millington that could do it pretty cheap not looking to spend a whole lot just need it hot tanked and magnafluxed anyone have any sugestions or can anyone do it for me??
Take it to rob at Vassar auto
Or bryants engine builder on dort hwy just south of mt Morris rd
Bryants
tear it down and powerwash it yourself, or take it to the skill center
Skill center doesn't have a hot tank
A & A out near Davison on M-15
Quote from: marshall on November 22, 2011, 03:06:04 PM
Quote from: OHEARN.2012 on November 22, 2011, 03:02:37 PM
Skill center doesn't have a hot tank
they did in 96?
all they have now is the boring.block and honed nothing else and they never get used
brayants dont take anything 2 A&A
Rat Tech on dort north of stanley
Quote from: mudboggincrazy on November 22, 2011, 04:13:29 PM
brayants dont take anything 2 A&A
Hey Dave have you heard bad things about a&a ?? im planning on taking new motor to them to freshing up let me know what you know man, I was told not to got to Brayants so let me know
Quote from: puddlejumper on November 22, 2011, 09:11:21 PM
Quote from: mudboggincrazy on November 22, 2011, 04:13:29 PM
brayants dont take anything 2 A&A
Hey Dave have you heard bad things about a&a ?? im planning on taking new motor to them to freshing up let me know what you know man, I was told not to got to Brayants so let me know
bill plain is the best if your looking for a guy, but he's all the way in vanderbilt
theres a place in stcharles that is good too hes done some of mine
Bryants 8106865666 he does all my blower motor machine work. Rat tech and a and a are both good shops
What would it cost me roughly for hottank and cam bearings?
call him up his name is ricky. real cool guy
Quote from: OHEARN.2012 on November 23, 2011, 01:39:30 AM
What would it cost me roughly for hottank and cam bearings?
Quote from: 'the DON' on November 23, 2011, 01:42:23 AM
call him up his name is ricky. real cool guy
Quote from: OHEARN.2012 on November 23, 2011, 01:39:30 AM
What would it cost me roughly for hottank and cam bearings?
got a number?
Quote from: Andy Michalik on November 22, 2011, 11:56:09 PM
Bryants 8106865666 he does all my blower motor machine work. Rat tech and a and a are both good shops
i used A&A in davison for a few years. needles to say at this point i will never go back i got to know the owners steve and tim. we had them do some work on a 440 BB and lets say they owed us a block when all done. requested certain parts and got charged for them but lesser parts where orderd and installed on there rebuild to pay us back for there mistake. it go's much much farther. get ahold of JR. at rodgers crank service north of oakley on M-52. he is the best. been useing him also for many years. honest and very well rounded. great machine work and knowledge.
jason debore is the best around hands down ....but its like anywhere else u get what you pay for if u want a 2000 dollar motor or a 30000 motor he does it all in house if ur intrested shoot me a pm an ill give you his number...hes near the otisville area...DO NOT USE A A THEY ARE THEIVES
A&A in Davison is a joke! Dont ever go there.
Quote from: sniperperformance on November 23, 2011, 07:10:59 AM
i used A&A in davison for a few years. needles to say at this point i will never go back i got to know the owners steve and tim. we had them do some work on a 440 BB and lets say they owed us a block when all done. requested certain parts and got charged for them but lesser parts where orderd and installed on there rebuild to pay us back for there mistake. it go's much much farther. get ahold of JR. at rodgers crank service north of oakley on M-52. he is the best. been useing him also for many years. honest and very well rounded. great machine work and knowledge.
i know a few guys that have had them do this 2 them also at puddeljumper bryants is the only place ill go hes a great guy and doesnt feed u p00 just 2 spend ur money he done all my work on my new motor its gonna rip when i get it all put together
Engineered victories in davison or swartz creek. Owners name is stan he has a whole in house top of the line machine shop and backs it up good. 8106353434 ask for stan
Quote from: justin0421 on November 24, 2011, 05:41:40 PM
Engineered victories in davison or swartz creek. Owners name is stan he has a whole in house top of the line machine shop and backs it up good. 8106353434 ask for stan
stan boyd, used to live down the street from him. raced for a lot of years.
wow i found A&A to be a great learning exsperience. they only charged me 5000$ for a 3000$ motor had it on the chassis dyno for 3 days but they only charged me for 2 days because they couldnt figure out what was wrong with the motor they built . the price on the build went up 3x during the build and i dont understand how. we used nothing from the original motor to start with. i have heard about complaints about some of the guys mentioned above. the exception to this is ricky bryant from bryants he cost more but if you only have to do it once its worth it to me.bryants is the only engine builder i will go to.
RICKY BRYANT ONLY GUY I WELL GO TWO
Quote from: 'the DON' on November 30, 2011, 01:31:04 AM
wow i found A&A to be a great learning exsperience. they only charged me 5000$ for a 3000$ motor had it on the chassis dyno for 3 days but they only charged me for 2 days because they couldnt figure out what was wrong with the motor they built . the price on the build went up 3x during the build and i dont understand how. we used nothing from the original motor to start with. i have heard about complaints about some of the guys mentioned above. the exception to this is ricky bryant from bryants he cost more but if you only have to do it once its worth it to me.bryants is the only engine builder i will go to.
Quote from: Rollover Herb on November 30, 2011, 04:30:50 AM
RICKY BRYANT ONLY GUY I WELL GO TWO
thats what ive heard about them also don real shady guys at that shop now ricky hes a cool kat and treats ya right
Quote from: justin0421 on November 24, 2011, 05:41:40 PM
Engineered victories in davison or swartz creek. Owners name is stan he has a whole in house top of the line machine shop and backs it up good. 8106353434 ask for stan
i can speak personally for stan boyd. he is a great guy but he dose not do everything in house. i had him do the machine work for my twin turbo lsx block. the machine work was dead nuts on and i will stand for him and his quality any day.
Ricky bryant i have never used dont know where hes located at but i have heard very good thing about him and would deff give him a shot sometime.