i bought some kc light brackets tht bolt onto the windshield frame but i cant get the bolts out any ideas dont want to strip them! these r what i bought http://www.quadratec.com/products/12110_600.htm (http://www.quadratec.com/products/12110_600.htm)
Impact driver, its a screwdriver you smack with a hammer you can get em at harbor frieght
im afriad an impact will snap them
Quote from: BUDGETBOGGER03 on January 10, 2012, 12:16:16 AM
im afriad an impact will snap them
He said impact DRIVER, it's a spring loaded tool that you hit with a hammer to help turn stuck bolts, screws, etc without twisting them off.
++peace
I have one if you get around this area
Quote from: burl on January 09, 2012, 11:29:04 PM
Impact driver, its a screwdriver you smack with a hammer you can get em at harbor frieght
thats what we used to get them out on one of our jeeps
Quote from: betterbeaters on January 10, 2012, 12:39:26 AM
Quote from: burl on January 09, 2012, 11:29:04 PM
Impact driver, its a screwdriver you smack with a hammer you can get em at harbor frieght
thats what we used to get them out on one of our jeeps
Factory locktite plus they are painted over, about the only way too get them out without snaping them
if they snap can i drill and tap a new hole without problems?
Quote from: BUDGETBOGGER03 on January 10, 2012, 12:55:38 AM
if they snap can i drill and tap a new hole without problems?
If you are capable of the drilling and tapping procedure, then yes.
Quote from: BUDGETBOGGER03 on January 10, 2012, 12:55:38 AM
if they snap can i drill and tap a new hole without problems?
Shane I got what you need, call me
Quote from: Boggen Joe on January 11, 2012, 11:13:23 PM
Quote from: BUDGETBOGGER03 on January 10, 2012, 12:55:38 AM
if they snap can i drill and tap a new hole without problems?
Shane I got what you need, call me
to late mounted em to the bumper and sent the mounts back :/