Well I got a 2dr s blazer, retiren the old k5 pumpkin
I'm going to run the stock s blazer frame, make the spring bracket.
Put my 1 tons under it, and 44s
Fresh up my 388 stroker with new pistons and drop er in.
No en to be bout 1000lbs lighter
I ll c
Keep yas posted on how it go
So does the tailgate come with the glass??? If so ill come by n grab it friday
text me pics i will post
sweet
Gonna be sweet!!
out with the old
:( sad to see another full size go.. would love to have a blazer again...
Got any good parts left on the k5?
Quote from: Blazin40s on March 27, 2012, 01:03:08 PM
Got any good parts left on the k5?
not really just what ive posted fs
Took the k5 to scrap
I will order my forged pistons tomorrow
Sad day in k5 ville
(http://i1120.photobucket.com/albums/l490/gregor214/imagejpeg_2_17.jpg)
Sweet!
I need to come up with a name for it, ???
That looks tough! applaudd
ull like the blazer joe they are way lighter then the k5 and with ur motor it should really rip good job hope 2 c u in the mud soon with this thing
Quote from: mudboggincrazy on March 31, 2012, 09:02:30 PM
ull like the blazer joe they are way lighter then the k5 and with ur motor it should really rip good job hope 2 c u in the mud soon with this thing
thanks, still got a lot of work to do lol
thanks, still got a lot of work to do lol
i hear that man they dont build themselfs for us now do they lol built a few truck now just take ur time and itll get done when its done no need 2 rush it other then the muds ready too fly now lol
nice! gonna be a sweet blazer!
ics
pics
Ordered pistons today, harward racing made by Ross
KOOL........ ++peace ++peace
i like. it looks nice
done yet?
pic
Looking good!!
rears springs in ++peace
Nice! Looks good
Look's SWEET.
Good seeing ya the other day Joe, keep up the good work,hope to be boggin soon!
Quote from: Orangecrush on April 27, 2012, 03:10:32 AM
Good seeing ya the other day Joe, keep up the good work,hope to be boggin soon!
I'm a go en, got the axles all bolts under. Putten the motor together tomorrow.
Here's a pic I snapped the other night
(http://i1120.photobucket.com/albums/l490/gregor214/IMAG0920.jpg) (http://i1120.photobucket.com/albums/l490/gregor214/IMAG0920.jpg)
Lookin tough buddy! Can't wait too see it in action.
can i drive?
Great to meet you other day joe. Nice Project!
Engine is almost done!! (http://i1120.photobucket.com/albums/l490/gregor214/imagejpeg_2_29.jpg)
(http://i1120.photobucket.com/albums/l490/gregor214/imagejpeg_2_30.jpg)
when you start opening boxes and unwrapping parts to put a new motor together i dont know about you but im happier then a kid in a candy store, or a kid on Christmas morning lol
Me too
what r these
applaudd motor looks famalier! what ya got in it?
Quote from: Bryank on May 11, 2012, 03:02:50 AM
applaudd motor looks famalier! what ya got in it?
stroker crank and 6" rods i beleive
Eagle rotating assm. 388 strocker, Ross forged pistons, 12:1, 6" rods 3.75 stroke
Quote from: Boggen Joe on May 11, 2012, 11:15:42 PM
Eagle rotating assm. 388 strocker, Ross forged pistons, 11.2:1, 6" rods 3.75 stroke
nice! big roller cam and aluminum heads? what size carb?
Flat tap cam, cast world heads
Nice, how close are you to bein done?
Quote from: AFurg85Chevy on May 14, 2012, 12:45:51 AM
Nice, how close are you to bein done?
Yeah come on Joe hurry up we're ready to throw some mud!!!
motor looks godd
It going to be awhile befor it's done, it's a freaked lot of fab work on this thing
Pics
Motor mount (http://i1120.photobucket.com/albums/l490/gregor214/imagejpeg_2_35.jpg)
Engine installed (http://i1120.photobucket.com/albums/l490/gregor214/imagejpeg_2_34.jpg)
looks good!
nice mounts man
Looking good !
Orbital (http://i1120.photobucket.com/albums/l490/gregor214/imagejpeg_2_40.jpg)
(http://i1120.photobucket.com/albums/l490/gregor214/imagejpeg_2_39.jpg)
Very nice
lookin good
Very nice.
Mid summer hit the mud?
updates? truck looks badass
nice blazer
Got all the whole mounts made and welded on. Tranny cooler mounted on firewall. Got to make D shafts and run coolant lines and wires and shes ready. ==np
Fired it up last night, hope to bog next weekend
Sweet!!!
sweet rip it up
these are stand pipes, well thats what i call them commonly used to only alow oil to drain at the front and rear of the lifter valley
Where u boggin Joe?
found these on my aunts facebook
++peace
Well is the little chevy going or r we takeing the little ford next bog ? looks good cuz .
I. Will have to post more pics, it's done, hitting the mud first time this weekend for shure
Looks good.......great job
It did good out there at Perkins man.
nice project keep up the good work
where ya going next with it
that was you at dans? that thing was ripping very nice build man
Quote from: BC775 on October 09, 2012, 03:34:16 AM
that was you at dans? that thing was ripping very nice build man
yeh that was me out there. I'm very happy with it. It all held together but fuel pump went out. Damn pro comp pump, next is a Holley or carter
Quote from: Boggen Joe on October 09, 2012, 09:21:15 PM
Quote from: BC775 on October 09, 2012, 03:34:16 AM
that was you at dans? that thing was ripping very nice build man
yeh that was me out there. I'm very happy with it. It all held together but fuel pump went out. Damn pro comp pump, next is a Holley or carter
Im running a pump from napa haha thing works great.
S
Quote from: BC775 on October 10, 2012, 02:27:31 AM
Quote from: Boggen Joe on October 09, 2012, 09:21:15 PM
Quote from: BC775 on October 09, 2012, 03:34:16 AM
that was you at dans? that thing was ripping very nice build man
yeh that was me out there. I'm very happy with it. It all held together but fuel pump went out. Damn pro comp pump, next is a Holley or carter
Im running a pump from napa haha thing works great.
weet
you going to come out to town rd on the 20th?
Quote from: BC775 on October 11, 2012, 01:29:02 AM
you going to come out to town rd on the 20th?
going to try to. Hope to get out of work
Its a fun time out there.
Had a blast out at town rd, nasty pit, I have some fuel issues but will get it fixed ==np
It looked good and was running good, good to see you mad the trip
Quote from: erikmud on October 22, 2012, 01:41:49 AM
It looked good and was running good, good to see you mad the trip
thanks
Getting a 850cfm carb, new fuel pump and pas solid cam( little bigger) lol
Now buy some Damn boggers and make it hook!!
Quote from: michigan maniac on December 12, 2012, 12:11:48 AM
Now buy some Damn boggers and make it hook!!
im pretty sure he has brians old 44's should do good!
So, what does winter have in store?
Lol I need some boggers, the TSLs just don't grab like I need now. Lol
Winter plans is fuel issues, new pump, carb, and fuel filter, a fram canister 10 micron. Other then that she's good to go
Quote from: michigan maniac on December 12, 2012, 12:11:48 AM
Now buy some Damn boggers and make it hook!!
sell me yours lol, come on lol
If they were the same bolt pattern I would prolly let you borrow them for a few bogs!!
Blazer ran great at perkins Joe, i think boggers would be an excellent choice,you ddef have the hp and tire speed .
boggers are what ya need it was the best thing i ever put on my blazer man ull luv a set on it hopefully ill see it run this nxt yr wanta get out and hangout some
I got the tires you need and the bottle to make sure they spin good! lmao
Just needs the tires the bottle is for mine 250 shot
Quote from: Orangecrush on December 14, 2012, 09:25:58 PM
Blazer ran great at perkins Joe, i think boggers would be an excellent choice,you ddef have the hp and tire speed .
thanks
Yeh I started saving already, hope by ring I will have enough to by a set lol
So your solid motor mounts held up all right? I've got some buddy's that has had them and they never seem to hold up to lesser motors.
Looks like a good truck, hope to see ya out at some bogs.
nice work joe
Quote from: mutt truck on December 17, 2012, 08:38:49 PM
So your solid motor mounts held up all right? I've got some buddy's that has had them and they never seem to hold up to lesser motors.
Looks like a good truck, hope to see ya out at some bogs.
. Nope haven't had a problem 1. I've had solid motor mounts in other boggers also with no problems . I use rubber or poly trans mount
Got some parts this weekend to make a pinion brake,
I already got a new fuel pump and fram caniser HP filter
Still need off road needle n seats and maybe a 850cfm
Got a brand new proform 850cfm race carb, lines and Holley pump
Like this one ??? (http://i1120.photobucket.com/albums/l490/gregor214/more%20stuff/downsized_0209131848.jpg)
Offroad needles and seats helped a ton with mine.
Quote from: michigan maniac on February 12, 2013, 11:55:45 PM
Like this one ??? (http://i1120.photobucket.com/albums/l490/gregor214/more%20stuff/downsized_0209131848.jpg)
Yep that's the carb
Found that the sending unit O ring was ripped litting water n mud in the tank, ( changed out)
Got the new fuel pump and filer setup all on
Just changed the P.S pump out (hope helps steering at idle)
Changed rims to 14" wide (fattend tires out)
Just got to bolt on new carb and tune in. ( I hope lol)
you try those headers yet?
Capt j and i seen it today and very nice rig very well built
Yours is almost rdy. Gregors is still semi far out and I'm goin backwards on mine. Nice
Quote from: AFurg85Chevy on March 31, 2013, 12:02:13 AM
Yours is almost rdy. Gregors is still semi far out and I'm goin backwards on mine. Nice
Hey I put my budget bogger stickers on my truck and car now so I'm one step closer ==thanks
I need to get those from you. I forgot
Quote from: michigan maniac on March 31, 2013, 01:16:36 AM
Quote from: AFurg85Chevy on March 31, 2013, 12:02:13 AM
Yours is almost rdy. Gregors is still semi far out and I'm goin backwards on mine. Nice
Hey I put my budget bogger stickers on my truck and car now so I'm one step closer ==thanks
That a boy
Now get the thing done so we can bog dang it
Thinken about names er STOMPER
What everyone think
Like the old little 4x4 stompers, remember them
I like it
Sounds good hope to see it run again sometime this year
Quote from: erikmud on April 07, 2013, 07:10:08 PM
Sounds good hope to see it run again sometime this year
Oh yeh me too.. Can't wait to see your new build run
Yeah me too
To the carb on, test n tune this weekend
Redid the brake line to run both ports off master, hope to stop better
Put shif kit in
Had a test n tune day, think its ready
Headen to carpenter rd bog sat
Where did you test and tune at?
Out at the house ripped every hole !
Yeh my brothers on McDowell
Tested her out this weekend at carpenter rd bog, all went well with no problems ;D
Ready for Gragory bog
Quote from: Boggen Joe on May 12, 2013, 02:22:30 PM
Ready for Gragory bog
I cant wait to see the truck run
All is well had have no real problems
Well blow the trans
But last weekend pull it and rebuilt it and ready for Byron bog the 4th
hope to see this again on the 3rd
Quote from: mudderboy on July 09, 2013, 02:03:56 PM
hope to see this again on the 3rd
at the Jeremy Benny bog?
Quote from: Boggen Joe on July 22, 2013, 04:56:38 PM
Quote from: mudderboy on July 09, 2013, 02:03:56 PM
hope to see this again on the 3rd
at the Jeremy Benny bog?
at walts bogg for jeremy king benifit great swamp great people great reason to fling muck!!! hope to see you there too joe!!!!
Just got to wash up nice n Perdy. TGW here we come
Stomper services tgw with no problems
Also made it throw eater man rd bog
May ville bog is next on the liar pants
When is mayville ?
Had a great year. Blow reverse out . Come back next year with upgrade
Hey thanks for trying to pull me out in fowlerville. I feel bad that your reverse blew out while you were doing it.
Quote from: JSvoboda on October 19, 2013, 12:29:08 PM
Hey thanks for trying to pull me out in fowlerville. I feel bad that your reverse blew out while you were doing it.
no problem man. Its just part of our sport. Nice to meet ya. Had good time
Just ordered all my th400 parts from FTI. Also a MR 3500 stall from them. Soon time for upgrade
Just stoped at Gordon's trans and got 34 element spragless n drum.
Also ordered my Derale trans cooler and gauge
Parts coming. Ain't playing lol
Got my trans parts
Just like Christmas morning
Gotta love getting new parts!
right on Joe, lookin good man,
Out with the th350
In with the th400
The new one is a lot cleaner !! What you doing with the old trans? What t case did you have on it ?
Clearances cross member mad front n rear shafts mounted cooler
Quote from: michigan maniac on April 19, 2014, 07:43:12 PM
The new one is a lot cleaner !! What you doing with the old trans? What t case did you have on it ?
th350 has bad case. Striped where the clichés lock in case and 208 case is cracked. Lmao yep was bet up
Well we will see if that trans cooler in a go spot or not lol :)
Why did ya go with a 400 instead of another 350?
Looking good man!!
Quote from: mutt truck on April 29, 2014, 05:21:30 PM
Why did ya go with a 400 instead of another 350?
Because I went through 4 th350s last year
Do you have a trans temp gauge?
Hey Joe are you gonna be at boothole?
I'll be at water man rd bog the 24th
Ok ill see ya there!!
Broke the front 1350 yoke n lost the grill at waterman rd bog
I remember doing that
Good times. Lets see what this winter brings
Try some new shoes for STOMPER.
Cutting new centers
Old centers
Hoping to get new heads this weekend ;D
Quote from: Boggen Joe on January 10, 2015, 01:13:33 PM
Cutting new centers
what did you cut your enters out of Joe
U gonna sell the hawgs?
Quote from: Blazin40s on January 10, 2015, 08:01:25 PM
U gonna sell the hawgs?
Idk yet buddy. Selling the TSLs first n got to see if i like tractors