anyone weld the spiders in a 9 inch ford? how?
not in a 9 inch but we've done 10 bolts, 12 bolts, and 14 bolts.. just pull the side gears and fill in 2 teeth on each side on both gears
Quote from: TRENT on April 06, 2012, 01:29:11 AM
Im sure someone has
my opinon would be to just buy a spool, you can get them for like $20 for a 9in, wish they was that cheap for other axles
Just as easy to weld... i welded my 8.8 with 110 welder works just fine
9 in spools are dirt cheap and fool proof tho ;D
yea you can get spools so cheap. because a lot of the race car guys use them i believe.
anyone got one layin around?
http://www.summitracing.com/parts/SUM-G7801/ (http://www.summitracing.com/parts/SUM-G7801/) or
http://www.summitracing.com/parts/SUM-G7802/ (http://www.summitracing.com/parts/SUM-G7802/)
Unless you have a 9" with an open carrier you cant really..... Gunna have to buy a spool or some sort of mini locker. Full spool is the way to go, 9" are so easy to set up its not even funny!!
i just went threw this you cant weld them becouse the spiders are in side the carrier you cant even see them i bought a spool from speedway motors for 22 bucks they also have one for 16 bucks but its not hardend i would get the better one
31 spline
http://www.speedwaymotors.com/Premium-9-Inch-Ford-Mini-Spool-31-Spline,34360.html (http://www.speedwaymotors.com/Premium-9-Inch-Ford-Mini-Spool-31-Spline,34360.html)
28 spline
http://www.speedwaymotors.com/Premium-9-Inch-Ford-Mini-Spool-28-Spline,34367.html (http://www.speedwaymotors.com/Premium-9-Inch-Ford-Mini-Spool-28-Spline,34367.html)
ive welded many of 9 in . all you have to do is take it in half. take the spider out and weld the axle gear on the 2 sides. if you take the ring gear off there 3 plilps headed screw holding it togther. split it like you do a 14 bolt.
fast78ford if you want it welded bring it to me. ill let you weld it. ill show you how to split it. send me a pm ill give you me #
Quote from: Ranger Dave on April 06, 2012, 07:15:44 AM
ive welded many of 9 in . all you have to do is take it in half. take the spider out and weld the axle gear on the 2 sides. if you take the ring gear off there 3 plilps headed screw holding it togther. split it like you do a 14 bolt.
fast78ford if you want it welded bring it to me. ill let you weld it. ill show you how to split it. send me a pm ill give you me #
mine dident have screws it was pressed I had to press it apart in the press