WeGotMud

Projects & Parts => Garage/Tech => Topic started by: xjs3667 on May 07, 2012, 02:23:24 AM

Title: HOW STUPID CAN YOU GET???
Post by: xjs3667 on May 07, 2012, 02:23:24 AM
After all the recent rain and flooding some idiots thought it be a good idea to go hit the water..... A guy came in today with a slight tick in his engine, said he went into some water over his hood at 45mph, his thought was if the engine stalls the momentum would cary him thru.... well needless to say he got what he deserved.... truck is a stock 98 s10 2.2L    I did a compression test and Cyl.2 was at 20psi and cyl.3 was 0, I thought it might been a bent valve, so pulled the head and the valve n seats were all chewed up, lots of sand and water on top of pistons, and walls were all scored up. I decided to go deeper and pulled the motor, heres what i found after pulling the pan, rods on cyl.2 & 3 bent to hell, cyl.3 is the worse, Crank, cam, and rod bearings all chewed up, for such a small tick im surprised at what I found, and from how bad it was im surprised it was running at all,   Im glad i get paid for this crap, well done idiot well done  applaudd   I hope he leared his lesson   loll
Title: Re: HOW STUPID CAN YOU GET???
Post by: ProGrade on May 07, 2012, 02:54:04 AM
applaudd
Title: Re: HOW STUPID CAN YOU GET???
Post by: MR NASTY on May 07, 2012, 03:04:03 AM
ya its real hard to compress water...some people make ya wonder
Title: Re: HOW STUPID CAN YOU GET???
Post by: marshall on May 07, 2012, 03:38:26 AM
sounds like your mad at the guy, stuff happens
Title: Re: HOW STUPID CAN YOU GET???
Post by: big red on May 07, 2012, 03:40:00 AM
Atleast you get payed to fix his stupid mistakes.
Title: Re: HOW STUPID CAN YOU GET???
Post by: rebel 4x4 on May 07, 2012, 04:39:11 AM
Water wheelin didnt turn out well for this guy either
(http://i1248.photobucket.com/albums/hh497/aksanders91/b8c31cf8.jpg) (http://i1248.photobucket.com/albums/hh497/aksanders91/b8c31cf8.jpg)
Title: Re: HOW STUPID CAN YOU GET???
Post by: jbeery78 on May 07, 2012, 10:55:05 AM
Haha i love it. Used to get about 2-3 msu student cars a summer that drove thru water and suddenly "quit" (bent rods, holes in blocks, the whole deal). Gotta love smart people cars and water dont mix well.
Title: Re: HOW STUPID CAN YOU GET???
Post by: xjs3667 on May 07, 2012, 01:16:31 PM
No im not mad at him, im happy that theres pwople like him if not id be makinf no money,  but I dont feel one bit sorry for him either
Title: Re: HOW STUPID CAN YOU GET???
Post by: Jjay78 on May 08, 2012, 02:38:49 AM
i've seen some good water motor fiascos too,
Title: Re: HOW STUPID CAN YOU GET???
Post by: Newbie on May 08, 2012, 02:42:59 AM
is that the new style of pistons :)
Title: Re: HOW STUPID CAN YOU GET???
Post by: RIP_K52007 on May 08, 2012, 02:58:07 AM
low compression? just throw a big turbo on it.. it'll be fine.
Title: Re: HOW STUPID CAN YOU GET???
Post by: old school truck dude on May 08, 2012, 10:57:23 PM
==roll
Title: Re: HOW STUPID CAN YOU GET???
Post by: 355REDNECK on May 09, 2012, 01:02:02 AM
Quote from: rebel 4x4 on May 07, 2012, 04:39:11 AM
Water wheelin didnt turn out well for this guy either
(http://i1248.photobucket.com/albums/hh497/aksanders91/b8c31cf8.jpg) (http://i1248.photobucket.com/albums/hh497/aksanders91/b8c31cf8.jpg)
haha seen that on the way to trucks gone wild
Title: Re: HOW STUPID CAN YOU GET???
Post by: Ikuhna on May 09, 2012, 09:53:39 AM
 loll
Title: Re: HOW STUPID CAN YOU GET???
Post by: Uncle Steve on May 09, 2012, 11:37:37 AM
 a=f i'm guilty of this  :( a=f
Title: Re: HOW STUPID CAN YOU GET???
Post by: ToughBowtieTruck on May 11, 2012, 02:19:07 AM
When I had the 95 (TBI) and I was going to go through flood waters I'd just throw the intake hose in the cab. Then voila, Intake is suddenly another 2 feet higher.

And some wonder why I nestle a stock air cleaner atop all my expensive engine goodies on the red truck . . .

(http://i113.photobucket.com/albums/n206/toughbowtietruck/IMG_0382.jpg) (http://i113.photobucket.com/albums/n206/toughbowtietruck/IMG_0382.jpg)
Title: Re: HOW STUPID CAN YOU GET???
Post by: Eroq on May 12, 2012, 12:16:14 AM
some people need to learn the hard way, we had a customer at the shop come in with an "engine tick".... upon inspection his oil was ALL metal shavings.... so we asked when his last oil change was....  with a puzzled look on his face he said "maybe two years ago? no wait it was 3 years"

he drove the truck for 2 more days and we heard him drive by every day, sounded like an old diesel on a below zero morning.. needles to say, we put a motor in it the next day....
Title: Re: HOW STUPID CAN YOU GET???
Post by: RIP_K52007 on May 12, 2012, 01:15:04 PM
Quote from: Eroq on May 12, 2012, 12:16:14 AM
some people need to learn the hard way, we had a customer at the shop come in with an "engine tick".... upon inspection his oil was ALL metal shavings.... so we asked when his last oil change was....  with a puzzled look on his face he said "maybe two years ago? no wait it was 3 years"

he drove the truck for 2 more days and we heard him drive by every day, sounded like an old diesel on a below zero morning.. needles to say, we put a motor in it the next day....
Had a old guy bring a F150 in when I worked at the dealership. Wouldnt run had it towed in.  They pulled the oil plug and the sludge that came out smelled nasty. Thing had almost 60,000 miles on it. Never had a oil change. ==doh and he wanted his engine replaced under warranty LOL
Title: Re: HOW STUPID CAN YOU GET???
Post by: 82burban on May 12, 2012, 02:24:18 PM
Quote from: rebel 4x4 on May 07, 2012, 04:39:11 AM
Water wheelin didnt turn out well for this guy either
(http://i1248.photobucket.com/albums/hh497/aksanders91/b8c31cf8.jpg) (http://i1248.photobucket.com/albums/hh497/aksanders91/b8c31cf8.jpg)
I drove right by this dude when he was out playing.