im tryin to find a conversion joint for my front shaft to pinion. the diveshaft side has to have a groove(1310) and the other can be grooved or plain(1350). not havin a whole lot of luck with the search....
http://eastcoastgearsupply.com/i-135304-dana-spicer-1310-to-1350-conversion-u-joint.html (http://eastcoastgearsupply.com/i-135304-dana-spicer-1310-to-1350-conversion-u-joint.html)
http://www.ntwonline.com/DANA-1310-TO-1350-CONVERSION-U-JOINT.html#.UHa1FMVE7jI (http://www.ntwonline.com/DANA-1310-TO-1350-CONVERSION-U-JOINT.html#.UHa1FMVE7jI)
http://www.oreillyauto.com/site/c/detail/PRE0/348.oap?ck=Search_348_-1_3967&keyword=348 (http://www.oreillyauto.com/site/c/detail/PRE0/348.oap?ck=Search_348_-1_3967&keyword=348)
Actually the above one's are not correct for what he needs. With the groove in the shaqft side, he would need a GM3R to Spicer conversion joint. Spicer doesnt make this joint, however Naepco does with a part#: of 11-00503R .
Quote from: BigWheelBob on October 13, 2012, 10:19:22 PM
Actually the above one's are not correct for what he needs. With the groove in the shaqft side, he would need a GM3R to Spicer conversion joint. Spicer doesnt make this joint, however Naepco does with a part#: of 11-00503R .
I was told by a driveline "specialist" that those dont exist tho... ???
Crap, try this one. 2-1153. The above might be a factory number. Or 3-3140 for a joint with all 4 outside clips. Spicer also makes this joint, it is a 5-460X.