WeGotMud

Projects & Parts => Garage/Tech => Topic started by: uncletuck on March 12, 2013, 07:28:57 PM

Title: q-jet
Post by: uncletuck on March 12, 2013, 07:28:57 PM
i have a few quadra jets carbs laying around i how do i tell what size they are i got a bbc i want to put one on
Title: Re: q-jet
Post by: J.C. on March 12, 2013, 08:05:08 PM
I think they are all 750 cfm.
Title: Re: q-jet
Post by: uncletuck on March 12, 2013, 08:11:03 PM
o man that would be sweet thanks
Title: Re: q-jet
Post by: 73chevytruck on March 12, 2013, 08:18:38 PM
I think there an on demand carb they use what they need upto 800cfm. There good carbs if rebuilt/working right.
Title: Re: q-jet
Post by: uncletuck on March 12, 2013, 08:29:58 PM
im going to rebuild one and throw it on...it beats whats on there now
Title: Re: q-jet
Post by: xjs3667 on March 12, 2013, 10:54:40 PM
Run the numbers, or post em there on the side of the carb body, they are on demand carbs, use as much fuel that's needed, SBC q-jets are around a 650-700cfm max and BBC is around 800-850 cfm max, either or will work on a BBC unless your running s monster loll
Title: Re: q-jet
Post by: 4x4xdodgeman on March 13, 2013, 12:58:21 AM
frist thing to do is how bad are the shaft are in base plate. that is the biggest problem with them.  sucking air though the shafts.
Title: Re: q-jet
Post by: uncletuck on March 13, 2013, 01:33:16 AM
Thanks guys i have 9 to choose from and its for a 402 bbc so 750 should be plenty
Title: Re: q-jet
Post by: Red97 on March 14, 2013, 11:15:18 AM
look  down the primarys, if there is a slight bump in one or both of the primarys than it is a bigger carb. if  no bump then it is a small carb.
Title: Re: q-jet
Post by: hot rod heep on March 23, 2013, 12:06:31 PM
If none of yours are any good I have a pile of them to if u need any parts it peases
Title: Re: q-jet
Post by: Merc09 on March 23, 2013, 02:49:50 PM
Quote from: uncletuck on March 13, 2013, 01:33:16 AM
Thanks guys i have 9 to choose from and its for a 402 bbc so 750 should be plenty
Would ya wanna let one go for cheap? Lol
Title: Re: q-jet
Post by: uncletuck on March 23, 2013, 03:28:05 PM
Yea i can do that