carquest no.autozone no.tsc sells 50' rolls but than i'll have 35' i dont need. any help would be appreciated.
Quality auto in fmuth that's wherever I got mine.
Quote from: Crazymays77 on March 21, 2013, 11:30:11 PM
Quality auto in fmuth that's wherever I got mine.
where is that at corey?
oreilly auto parts
Right across the street from mike youngs just north of subway same side of the street. It's not gonna be cheap for 15-20 ft.
Quote from: Crazymays77 on March 21, 2013, 11:34:35 PM
Right across the street from mike youngs just north of subway same side of the street. It's not gonna be cheap for 15-20 ft.
its 50 for a 50 foot roll at tsc hope its cheaper than that
2.99 a ft at oreillys its 4 ga
stillcheaper then a batt. relocation kit i guess
It's 49.99 for 25 ft of red and 59.99 for 25 ft of black at tsc online. It's not gonna be much cheaper than that anywhere. But if u don't need that much get it buy the ft carquest in Millington should have it too.
What u trying to do.
Quote from: Crazymays77 on March 21, 2013, 11:46:44 PM
What u trying to do.
i put my batteries behind the cab.just trying to run a + to the solenoid and i wanna put a couple grounds motor from frame.
Places that install plows usually just pull all the wiring when they do upgrades, might be able to get it cheap that way. I did.
I ran 2 batteries in the back and in my case 4g wouldn't supply enough amps. Burned up 1 starter trying to get er to fire the first night. I had to upgrade to 2g wire and had no problems. I use 2g to supply the starter and 4 g for my engine and chassis grounds.
grainger and do you have an air gas store or a welding supply shop dont use standard battery power lines waste of time and $$
I used welder lead cable in the bronco I might have some left have to look
If you can find a place that does wheelchair lifts for handicap vans they will have it also. Or
Find one at a scrap yard
thanks guys looks like i got some options now
Auto value
Use a heavy gauge jumper cable!! Cut the ends off
As others said... welding cable. Nice and flexible and not too expensive.
find a shop that sells winches ,they should heavy duty cable .
No one thought of going to a car audio/customizing shop? They sell by the foot and have whatever gauge you want. I remember getting 0 gauge back in my car audio days.
theres a motorhome chassis here at my place has about 50 feet of it 3$$ a pound