where to get custom springs

hghrdnhck · September 24, 2012, 05:24:33 PM

I'm building a scout 800, the biggest lift they offer is 2 inches. I am looking for a place to get custom springs made. I will be running 39's, a dana 60 front, and 14 bolt ff rear. I'm guessing with the spring over lift I'll need probably 8 to 10 inches of lift. Pre 75' cj5 or cj6 springs are a direct bolt on, so if anyone knows where there's any CJ Springs that would help too

inkslinger · September 24, 2012, 10:10:20 PM

Michigan truck spring in saginaw can order and arch or rearch what ever you need.

justin0421 · September 24, 2012, 11:49:26 PM

Or beatie spring in flint mi

hghrdnhck · September 25, 2012, 12:12:23 AM

Called michigan truck spring today, they told me to call tuff country to see if they could make what I want....no luck. I couldn't get a answer a beatie spring. Thanks for the help

BC775 · September 25, 2012, 12:22:33 AM

theres a place in lansing i think its called state spring. i get all my trailer springs made by them

michigan maniac · September 25, 2012, 01:17:11 AM

Beatie spring is where I get all my stuff done, they are pretty helpful

71 Highboy · September 25, 2012, 01:45:09 AM

Quote from: michigan maniac on September 25, 2012, 01:17:11 AM
Beatie spring is where I get all my stuff done, they are pretty helpful

x2

inkslinger · September 25, 2012, 01:53:15 AM

Wow....I will call one of the big guys I know at Mich truck and ask him what's up with that, they built my packs and arched them for me couple years ago.
Started as 84 1 ton Ford springs and removed 3 from rear amd added 1 up front with 10" arch on rear and 12 front
Will pm you when I talk to him amd give u a number

TopFist · September 27, 2012, 11:32:49 PM

livingston spring. fowlerville mi.

page69 · September 28, 2012, 01:12:47 AM

beatie spring is always busy matt can get perty much any thing u want or they can make it their good

rangerwheelinmike · September 28, 2012, 04:06:20 AM

Quote from: page69 on September 28, 2012, 01:12:47 AM
beatie spring is always busy matt can get perty much any thing u want or they can make it their good

x2 thats where i go

cumminsmatt98 · October 08, 2012, 08:56:41 AM

State spring in Lansing won't make lifted springs. We use ab spring out of grand rapids. They'll make any height spring you want for $200 each I believe. Great quality, but there a bit stiff.

four_by_ken · October 08, 2012, 04:38:40 PM

If want some REAL good leaf springs, call Alcan Spring. They know their stuff.

http://www.alcanspring.com/

Something you may want to keep in mind with the old Jeep springs is that they are real narrow and tend to get bent with just 33-35" tires. Going big like you are... I would remake the mounts and go with a 2.5" wide spring.

Also, if you want to stick local to Michigan. Give John R Spring a call.

John R Spring
1782 East Maple Road
Troy, MI 48083
(248) 588-7200