Who has chevy center bolt valve covers?

[Disturban]

Could you please post a pic of how you loomed your plug wires? I keep getting these cheap looms that melt or crack then my wires are flopping all over the place. I don't really want to spend $50 on this but I might have too http://spideraccessories.stores.yahoo.net/mrgasket6042.html

[CRAZY MAN broncomudhead]

just drill two holes in your covers and use carrige bolts and lock washers with double nuts one to hold bolt to cover and then put those wire holders on and nut them down to the other nut and do't over drill the hole make hole so you have to turn the bolt in to it and use a il resitant polimer to seal the head of carrige bolt ond either get bolt without square nub on it

[Disturban]

Excellent idea...I might just do that 

[84Chevy]

i have em on my vortecs but i was just gonna run the looms and some fire proof boots... some of my wires go under headers too though ...post pics up of how you end up doing em !!

[Disturban]

post pics up of how you end up doing em !!

Will do...I have a set of Bosch universal fit wires on it right now and some of the wires are to long. I think I might get a set of custom MSD wires so I can cut them to the length I need for a better fit. It just looks sloppy as hell right now and I got wires touching each other and rubbing on other parts of my motor and I dont like that because sooner or later that rubbing will wear a hole in them.

[Chevy Racer]

Mine are zip tied together. Quick and cheap lol  Running Accell 8mm wires

[Disturban]

Mine are zip tied together. Quick and cheap lol  Running Accell 8mm wires

I tried that but the heat from my manifolds melted the zip ties.

[Chevy Racer]

I open the hood after every bog anyway so they last a bog or 2