who has the biggest motor?

[84Chevy]

I HAVE A  540 CI BBC IN MY BOGGER ABOUT 800 PONIES.  IT IS CURRENTLY FOR SALE ALSO  IVE GOT 17,000 INTO IT AND I WOULD TAKE 10,500. IT IS IN THE LIGHT BLUE S-10 THAT JUST GOT PAINTED.

id be happy with that !!!!

[motorctymade]

1835 cc's of pure german thunder kickin out a crazy 60hp of jaw dropping power. I will crush all who park in front of me

[betterbeaters]

I HAVE A  540 CI BBC IN MY BOGGER ABOUT 800 PONIES.  IT IS CURRENTLY FOR SALE ALSO  IVE GOT 17,000 INTO IT AND I WOULD TAKE 10,500. IT IS IN THE LIGHT BLUE S-10 THAT JUST GOT PAINTED.

that trucks rips!!!!  wish I had the money to buy it!

[TBigLug]

I HAVE A  540 CI BBC IN MY BOGGER ABOUT 800 PONIES. 

id be happy with that !!!!

I would be....... for about a season. Then I'd be bitchin' that I needed more! Nice motor though!

[oscar_169]

This is the motor I just got in today for that S-10 bogger I have been building, heres the spes, tell me what you think


EXTREME PRO STOCK 932 CU. IN. SEMI-HEMISPHERICAL 5.300" BORE SPACING 2140HP

GM SEMI-HEMISPHERICAL HEADED ENGINE
5.080" BORE X 5.750" STROKE
NATURALLY ASPIRATED (NO NITROUS)

2140 HP @ 81001475 LBS. Torque @ 6500
Complete and Dyno TestedPRICE $89,300.00,

[oscar_169]

The Post above     

[RaZiN KaNe]

I THINK THE TOPIC SHOULD HAVE BEEN..." WHOS GOT DINO SHEETS ON THERE MOTOR" LMAO IM GONNA START A TOPIC HOW MUCH DOES IT COST TO BUILD A 650 HORSE 550 FT TORQE MOTOR

[millser]

I THINK THE TOPIC SHOULD HAVE BEEN..." WHOS GOT DINO SHEETS ON THERE MOTOR" LMAO IM GONNA START A TOPIC HOW MUCH DOES IT COST TO BUILD A 650 HORSE 550 FT TORQE MOTOR

got like over $4000 in mine

[four_by_ken]

I THINK THE TOPIC SHOULD HAVE BEEN..." WHOS GOT DINO SHEETS ON THERE MOTOR" LMAO IM GONNA START A TOPIC HOW MUCH DOES IT COST TO BUILD A 650 HORSE 550 FT TORQE MOTOR

Yeah, and I wanna see dyno sheets too!   :-)

[JHHD4by4]

I've got a small block older gm crate motor , hopefully pushin' 600 hp. My husband said he thinks I will be scared of it..  It was in my truck when I bought it and he has been takin' his sweet ass time and money to re-build it. 

[TOMAC]

I THINK THE TOPIC SHOULD HAVE BEEN..." WHOS GOT DINO SHEETS ON THERE MOTOR" LMAO IM GONNA START A TOPIC HOW MUCH DOES IT COST TO BUILD A 650 HORSE 550 FT TORQE MOTOR

show me yours?

[RIP_K52007]

Who dynos motors? Im putin a 3.0l gm 4cyl together.. Gona be curious what it makes

[burl]

ive got a 2.9l efi with around 130+/- hp ill out run you anyday!!!!!!!

[burl]

This is the motor I just got in today for that S-10 bogger I have been building, heres the spes, tell me what you think


EXTREME PRO STOCK 932 CU. IN. SEMI-HEMISPHERICAL 5.300" BORE SPACING 2140HP

GM SEMI-HEMISPHERICAL HEADED ENGINE
5.080" BORE X 5.750" STROKE
NATURALLY ASPIRATED (NO NITROUS)

2140 HP @ 81001475 LBS. Torque @ 6500
Complete and Dyno TestedPRICE $89,300.00,

my snowmobile has bigger pistons...hahahahahahahahahhahahhahahahahhahahahhahaha

[RaZiN KaNe]

i got dino sheets do u tomac???

[millser]

lets see um

[RaZiN KaNe]

lets get one thing straight im not on here to run my mouth thats what i ment when i said  the topic should have been whos got dino sheets on there motor ..some of these guys that tell u there runnin 600 to 800 horse im not belavin...as to my motor i do do have papers for the dino but its not nothin spectaular its a 406 sbc  456 horse at 5500 550 fts torqe ... 406 line bored decked keith black forged pistons total seal rings eagle h beam rods  eagle forged 4340 steel crank dart sportsman 2 heads titaniam retainers got a few goodies in there ..i have heard a few really healthy boggers out there but everyone is n ot pushin 600 horse like they think they are  like they say wheel ur truck not ur mouth boys

[millser]

i try and run mine blew up 3 454s all ready thise year then built my new one every thing new from carb to pan it rocks       but any moter if it runs wheel it   i wheeled every thing from 4 banger to a 502 as long as your haven fun that what matters

[BIG DOG]

now now   i dont have papers but summet did say my 350   plus 20 hp for my headers  another 16 for my k&n filter   12 more for the 4 barrel       and the alu. rad to keep cooler ever more hp   

[oscar_169]

This is the motor I just got in today for that S-10 bogger I have been building, heres the spes, tell me what you think


EXTREME PRO STOCK 932 CU. IN. SEMI-HEMISPHERICAL 5.300" BORE SPACING 2140HP

GM SEMI-HEMISPHERICAL HEADED ENGINE
5.080" BORE X 5.750" STROKE
NATURALLY ASPIRATED (NO NITROUS)

2140 HP @ 81001475 LBS. Torque @ 6500
Complete and Dyno TestedPRICE $89,300.00,

my snowmobile has bigger pistons...hahahahahahahahahhahahhahahahahhahahahhahaha

It's not how big the pision its how many