Project Stepn' Down is in the scrap yard.

[99chevy2500]

looks good. id paint it the carbon fiber base with some old school flames (with the green and blue).

[Cannaert]

NEW PICS.

Visor is ready for paint.


The Hood I have been working on. YES I did cut a big hole in the hood for the scoop to work.  Needs primer and paint now.



The truck with the bed cap on it.



I need to drop the rear end 2 inches. So All I am going to do is a Shackle drop on it and nothing more. The spring up front are the v6 springs and the weight of the 350 dropped it down 2 inches from stock.

Oh yea I picked up paint for it as well.  New Holland Yellow. Going to get some Black as well and do a  muscle car look with it.
Like the Boss 302 and combining it with the RS/SS Camaro strip. Only one strip instead of three.

[homewrecker john]

Any new pics?

[chevroletj5]

  nice!

[Cannaert]

Slight up date.

Cam up with a name for it finnly.

Also picked up a Step side bed in Great shap from awd9000. Thanks Again.  Going to start on  swaping the beds out this weekend and try to find some cab conrners as well.  Want to get this puppy going so I if in the event I have some stupid happen and I need a nother truck I got somthing to drive.

[savon]

any updates on this?

[Cannaert]

Not yet. Hoping to get some more work done on it this weekend.

[Cannaert]

Here it is as of this morning.   No much done to it besides the tires being off and it sitting on jack stands.



Here is the new bed and the only thing wrong with it.

[Cannaert]

Well the bed if off as an hour ago.   Now the fun begins. Need to fix the cab corners, Rear brake line, Pinon Seal, trans output seal and find both ends for the taillight harness that plugs together under the bed (it had electrical tape holding the wires together and that was it).

I can not believe that I never had a electrical fire on this truck. 
The Kid I got this from is a complete hack jobber and I will never talk to him again.


Oh yea I will get pic tomorrow. Its to dark now.

[Cannaert]

Bed off and read for a good old strip down. All I need to do is gut the inside of the cab, pull the back glass out, pull the windshield, undo front clip, have Eroq weld in my cab corners, fix the dents on the doors and it will be ready for paint.


Here is my Sexy New Dash. OOOOOOH AAAAAAAHH.  It all nice and Low-gloss black

[Cannaert]

Well The Cab is almost stripped down.  Got to Pull the column or at least drop it out of the way.  I have 4 blots left and the wiring and it will be out. Need to pull the seats and that is about it.

[Cannaert]

Dash is out now and I need to pull the Hav/AC box

[ProGrade]

lookin good

[Cannaert]

There is al my hard work for the day.  Lets see what I can get done tomorrow.

[Kyle]

dude.... all i can say is u got WWWWAAAAAAAAAAAAYYYYYYYYYYY more ambition than i do... cuz that wont be just a dd. it will be a frickin SHOW TRUCK! 

[2trackr]

lookin awesome chris...keep up the hard work

[Cannaert]

Well last week Eroq got the cab corners welded in for me. Now its on to the body rest of the body work. Got a new fender from CBakes and need to get it scuffed up and and painted along with the hood.  Going to bring the bed over and get that done as well.

The cab is the only thing that is going to take a little bit of time to finish up.  I need a whole dash wiring harness for it and to finish up some other small Odds and ends on the inside before i get to working on the body work.

[Cannaert]

Well I had to get a new DS door. The old one was so bad every time I popped out a dent and work on the next one the old one would pop back in. Man I love tin canning.

But today my Dad help me put the bed on it. Yea its just sitting on there, but it at least it looks like a truck now.
I did find a GMC Denali Front clip that was damaged for a real nice price.  Only thing I need to get is a DS Head light and turn signal housing.

But any ways here it is Semi together

[Cannaert]

Well I let this one go for a Camaro and it is now in Car heaven I guess.