ball's deep

Started by camok10, January 20, 2011, 08:22:54 AM

Previous topic - Next topic

camok10

well this is the new project for now im shure most of you know how fast i go through car's so we'll see how it go's (oh ya and i traded my f150 with a bad trans for this ) i know it's not a 4x4 but it's what i got now loll and im shure you all can apreciate a clean muscle car as much as a bogger

85 monte ss  ;D

healthy sbc, th350 trans unknown axle gear's

what i plan on doing is some finishing touches as the car is mostly done

those touches include fix speedo, fix the factory tach or mount a aftermarket some were if i fix the factory im planing on a shift light on the dash. make a piece to go aropund the heater control's and were the radio go's to hold a radio and cover the big hole were one used to be. put a much smaller carb on it(600-700) to replace the 800 thats on it now. fix the obnixious header leak and last get some weld 5 stars to replace the ugly chrome mod's on it now and maybe a rachet shifter to top it all off









07 Silverado 2.5" leveling kit, flowmaster, k&n, manual every thing but the trans

84 c10 project

82 c10 beater diesel

betterbeaters

Have no fear Better Beaters is here.
76 chevy 1 tons 4.10s 350th 208 rip
86 army truck
87 chevy short box 1 tons 38s 350 vortec 350 th 208
real men play in swamps!!! cause thats how we roll!  BITCHES
full size chevys the real mans truck!

marshall

maybe im old, but i like the stock aluminum wheels on these cars? looks good, you need a beater with a heater!
chevvv proud member of the wrong crowd chevvv

RIP_K52007

#3
==cl


seen one at work with a set of these replica corvette zo6 wheels and it looked good

==np ;D lol

TBigLug

Nice ride man. I'm a factory wheel man myself.
Big John's the name, big horses are my game!

"Casper" 2004 Chevy Cavalier, 2.2, 5 sp. (g/f dd)
"The Hoopty" 1995 Mercury Grand marquis, 4.6L (my DD)
"My Chevy" 1992 Chevy Z71, 5.7L, 700R4 (Horse Hauler, Farm Truck, Cruiser)

"I'll keep my God, freedoms, constitution and my guns. Obama, you keep your change!" -Protesters Sign

"A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government."  -- George Washington

TBigLug

Nice ride man. I'm a factory wheel man myself.
Big John's the name, big horses are my game!

"Casper" 2004 Chevy Cavalier, 2.2, 5 sp. (g/f dd)
"The Hoopty" 1995 Mercury Grand marquis, 4.6L (my DD)
"My Chevy" 1992 Chevy Z71, 5.7L, 700R4 (Horse Hauler, Farm Truck, Cruiser)

"I'll keep my God, freedoms, constitution and my guns. Obama, you keep your change!" -Protesters Sign

"A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government."  -- George Washington

bud

Quote from: TBigLug on January 20, 2011, 05:08:12 PM
Nice ride man. I'm a factory wheel man myself.

when i had my montes i tracked down some factory wheels, chevy did it right when they matched the stock wheels to these cars!!!!

camok10

Quote from: betterbeaters on January 20, 2011, 01:08:34 PM
specs on that motor?

the p.o said two things once when he offered he said 350 4 bolt 60 over then when actually looking at the car with title in my hand he said 403  it move's regardless. it's also a premium fuel motor i tryed a little bit of plus to see and man did she not like it. has a smaller lift cam that has a little lope to the idle about like my camo truck did so i would guess ~ 480 lift has heddman hedders with some small body glass packs right off them edelbrock intake and 800cfm carb witch is way to much i would like to get a 650-700 edelbrock for it.

here's what i was thinking for rim's since im not a big rim guy and factory's wouldnt give the drag stance it has now i was thinking these to complement it

front

http://www.summitracing.com/parts/WLD-96-54272/

rear

http://www.summitracing.com/parts/WLD-96-58278/

and then maybe through some e.t. steets on the mods i have out back for some real fun ;D

also just looked up the o.e. alloy wheel's and for 85 there hidious but the 86-88 are pretty sexy

here are mine loll

http://www.originalwheels.com/chevrolet-wheels/montecarlo1985rims.php
07 Silverado 2.5" leveling kit, flowmaster, k&n, manual every thing but the trans

84 c10 project

82 c10 beater diesel

bud

those cant be the stock rims i had a 84 and a 86 ss and they dont look like that!!! mine looked like these

http://px6.streetfire.net/0001/18/28/1408182_600.jpg

camok10

that is the 86-88 style it seem's but either way they are much better looking
07 Silverado 2.5" leveling kit, flowmaster, k&n, manual every thing but the trans

84 c10 project

82 c10 beater diesel

marshall

Quote from: bud on January 20, 2011, 06:14:51 PM
those cant be the stock rims i had a 84 and a 86 ss and they dont look like that!!! mine looked like these

http://px6.streetfire.net/0001/18/28/1408182_600.jpg
those are sweet. the other posted alloy rims were not ss, the steel ones were tho. Going by memory, not facts, but im pretty sure
chevvv proud member of the wrong crowd chevvv

Boggerram87


camok10

Quote from: Boggerram87 on January 20, 2011, 08:06:35 PM
Thats Sick!!!!!!

thank's she's being a little finicky right now in the cold i really need a smaller carb
07 Silverado 2.5" leveling kit, flowmaster, k&n, manual every thing but the trans

84 c10 project

82 c10 beater diesel

Uncle Steve

 a=f   ==kp a=f

check out my 71 ==roxs

==bgmS 10 Blazer with 31"s chevvv

trogdor48430



hillbilly1975

drags stars r cool but i like the ss wheels or the old chevelle camaro wheels with center cap and beauty rings
All throttle NO bottle. my inner child is a mean little f***er

Broncoholic

I have a brand new Edelbrock in the box 600CFM $200

camok10

Quote from: Uncle Steve on January 21, 2011, 02:43:06 PM
a=f   ==kp a=f

check out my 71 ==roxs



now thats sexy

bronc me and woody are working something out if it falls out i will be getting a hold of you

i agree hillbilly but i love that draged look with bigger rubber in the rear and the skinny's up front

trogdor i love them now too loll first car i've had since highschool
07 Silverado 2.5" leveling kit, flowmaster, k&n, manual every thing but the trans

84 c10 project

82 c10 beater diesel

Uncle Steve

==bgmS 10 Blazer with 31"s chevvv

camok10

well the tach and heater core are fixed now, the more i work on this car the more im wanting to keep it. that week with out haveing any heat sucked.
07 Silverado 2.5" leveling kit, flowmaster, k&n, manual every thing but the trans

84 c10 project

82 c10 beater diesel

Powered by EzPortal