Engine shops near flint area??

Started by OHEARN.2012, November 22, 2011, 08:55:14 AM

Previous topic - Next topic
Print
Go Down Pages 1 2 All
User actions

rangerwheelinmike

#20
November 23, 2011, 02:48:26 AM
Quote from: Andy Michalik on November 22, 2011, 11:56:09 PM
Bryants 8106865666 he does all my blower motor machine work. Rat tech and a and a are both good shops

sniperperformance

#21
November 23, 2011, 07:10:59 AM
i used A&A in davison for a few years. needles to say at this point i will never go back i got to know the owners steve and tim. we had them do some work on a 440 BB and lets say they owed us a block when all done. requested certain parts and got charged for them but lesser parts where orderd and installed on there rebuild to pay us back for there mistake. it go's much much farther.  get ahold of JR. at rodgers crank service north of oakley on M-52. he is the best. been useing him also for many years. honest and very well rounded. great machine work and knowledge.

RaZiN KaNe

#22
November 23, 2011, 01:11:58 PM
jason debore is the best around hands down ....but its like anywhere else u get what you pay for if u want a 2000 dollar motor or a 30000 motor he does it all in house if ur intrested shoot me a pm an ill give you his number...hes near the otisville area...DO NOT USE A A THEY ARE  THEIVES
B.G. Grounds Maintenance
For All Of Your Residential & Commercial Turf Needs

82burban

#23
November 23, 2011, 07:27:49 PM
A&A in Davison is a joke! Dont ever go there.

mudboggincrazy

#24
November 24, 2011, 12:43:48 AM
Quote from: sniperperformance on November 23, 2011, 07:10:59 AM
i used A&A in davison for a few years. needles to say at this point i will never go back i got to know the owners steve and tim. we had them do some work on a 440 BB and lets say they owed us a block when all done. requested certain parts and got charged for them but lesser parts where orderd and installed on there rebuild to pay us back for there mistake. it go's much much farther.  get ahold of JR. at rodgers crank service north of oakley on M-52. he is the best. been useing him also for many years. honest and very well rounded. great machine work and knowledge.
i know a few guys that have had them do this 2 them also  at puddeljumper  bryants is the only place ill go  hes a great guy and doesnt feed u p00 just 2 spend ur money he done all my work on my new motor its gonna rip when i get it all put together
bog  it  like  you  stole it   chevvv  can take  it           
if its  2 loud then cover  your ears  damit     350?ci s10 on danas  and 44 boggers  chevvv

justin0421

#25
November 24, 2011, 05:41:40 PM
Engineered victories in davison or swartz creek. Owners name is stan he has a whole in house top of the line machine shop and backs it up good. 8106353434 ask for stan

marshall

#26
November 30, 2011, 12:53:46 AM
Quote from: justin0421 on November 24, 2011, 05:41:40 PM
Engineered victories in davison or swartz creek. Owners name is stan he has a whole in house top of the line machine shop and backs it up good. 8106353434 ask for stan
stan boyd, used to live down the street from him. raced for a lot of years.
chevvv proud member of the wrong crowd chevvv

'the DON'

#27
November 30, 2011, 01:31:04 AM
wow i found A&A to be a great learning exsperience. they only charged me 5000$ for a 3000$ motor had it on the chassis dyno for 3 days but they only charged me for 2 days because they couldnt figure out what was wrong with the motor they built . the price on the build went up 3x  during the build and i dont understand how. we used nothing from the original motor to start with. i have heard about complaints about some of the guys mentioned above. the exception to this is ricky bryant from bryants he cost more but if you only have to do it once its worth it to me.bryants is the only engine builder i will go to.
==wgm

Rollover Herb

#28
November 30, 2011, 04:30:50 AM
RICKY BRYANT  ONLY GUY I WELL GO TWO
==ogm

mudboggincrazy

#29
December 01, 2011, 03:58:17 AM
Quote from: 'the DON' on November 30, 2011, 01:31:04 AM
wow i found A&A to be a great learning exsperience. they only charged me 5000$ for a 3000$ motor had it on the chassis dyno for 3 days but they only charged me for 2 days because they couldnt figure out what was wrong with the motor they built . the price on the build went up 3x  during the build and i dont understand how. we used nothing from the original motor to start with. i have heard about complaints about some of the guys mentioned above. the exception to this is ricky bryant from bryants he cost more but if you only have to do it once its worth it to me.bryants is the only engine builder i will go to.
Quote from: Rollover Herb on November 30, 2011, 04:30:50 AM
RICKY BRYANT  ONLY GUY I WELL GO TWO
thats what ive heard about them also don real shady guys at that shop  now ricky hes a cool kat and treats ya right
bog  it  like  you  stole it   chevvv  can take  it           
if its  2 loud then cover  your ears  damit     350?ci s10 on danas  and 44 boggers  chevvv

sniperperformance

#30
April 24, 2012, 02:26:14 AM
Quote from: justin0421 on November 24, 2011, 05:41:40 PM
Engineered victories in davison or swartz creek. Owners name is stan he has a whole in house top of the line machine shop and backs it up good. 8106353434 ask for stan

i can speak personally for stan boyd. he is a great guy but he dose not do everything in house. i had him do the machine work for my twin turbo lsx block. the machine work was dead nuts on and i will stand for him and his quality any day.

Ricky bryant i have never used dont know where hes located at but i have heard very good thing about him and would deff give him a shot sometime.

Print
Go Up Pages 1 2 All
User actions
Powered by EzPortal