spindle bearings and inner axle seals?

[OHEARN.2012]

never changedone in my life someone tell me how to 80s chevy corp 10

also how do you change out the inner axle seals inside the carrier 78 dana 44 high pinion f150

[Jjay78]

you talking the little berrings that the axle shaft goes through?

[OHEARN.2012]

you talking the little berrings that the axle shaft goes through?

Yes its on the back side of spindle

[Jjay78]

i just use a screwdriver and knock em out from the front side... gotta be a preaty long screw driver though

[OHEARN.2012]

i just use a screwdriver and knock em out from the front side... gotta be a preaty long screw driver though

do u just pound them in then?

[Jjay78]

with an impact socket and a small hammer, doesn't take much to get the new one in

[OHEARN.2012]

with an impact socket and a small hammer, doesn't take much to get the new one in

thanks for the info! U know how to do axle seals?

[Hammerlane]

lil tip for the spindle inner bearings..

put the bearings in the freezer for about an hour..
WARM the spindle with a propane torch.. LIGHT HEAT here..
just warm it up to expand the metal..

drop the bearings in place..


I use the same trick when doing hub bearing races in big trucks..