Had this truck for a few years now but never made a build up....... Shes a 85 K10 Blazer, When I bought it it had a 350-700r4-208 with 10 bolts and 4.56's on a 6" soft ride lift with 35" bfg a/t's. Drove it home and trans blew up, put in a new rebuild on it. Then Blew up the rear end, new 4.56's and Detroit tru-trac. Engine went on me so I built a 406 sbc, 10.5-1 forged pistons, all new ARP hardware, re-man rods, bowl ported the heads, hooker headers, edlebrock rpm performer intake and 600 cfm carb. She rips along pretty good. Picked up a Detroit tru-trac from gearz, and been running it on some 14/36.5 rvt's since then.
Caught a deal from my neighbor on a 60/14ff combo with 4.56's for $200 so I got a hunch to build her bigger. Over the past few weeks Ive installed a set of 12" front springs and a shackle flip with a longer shackle and 2" block in the rear with my old 6" springs so its about 13" lift in the rear (no body) Also got parts from Offroad Design and Big Dog and did crossover steering on her. I also picked up some 16/35-15 Boggers from Jtech and that's what I'll be running until i find something bigger. Shes gonna be my dd in the winter so im toying with the idea of making her a dually so I dont kill the boggers running them on pavement
Looks awesome!!! Thats one hell of a steal for 200 bucks man!!! Wish i could catch a break like that.....
looks good
==cl you dont see many dually blazers around.
Quote from: mac_henderson2001 on October 15, 2009, 04:32:01 PM
Looks awesome!!! Thats one hell of a steal for 200 bucks man!!! Wish i could catch a break like that.....
Wow! Looks like you're moving along! Can't wait to see it done!
Yea I went over and asked that guy how much he wanted for them axles he told me "well I had a guy that was gonna pay $300 but its been 2 weeks, but I'll give em to ya for $200" I just about p00 my pants, I ran my =kma home and got cash that day! thanks y'all, shes coming along good, just need shocks, brake drums and shocks and i'll be in biz!
looks good nice chevv
Looks real good. What a steal for $200.
that is going to look sick!!!!
==kp good luck on it should be cool
kick ass ride! sweet idea about the duals!
I like it alot, don't see many K5's in that kind of shape
looks awsome!!
sweet ride/project a=f
looks good almost stopped by tonight...seen you out there in the barn i drove by in that red chevy with blue cablights
Quote from: DirtyChevy on October 18, 2009, 01:16:04 AM
looks good almost stopped by tonight...seen you out there in the barn i drove by in that red chevy with blue cablights
If the orange Ford is out there swing on in and check her out!
Bought time you start a project page. LOL Looking dam good. Glad mine gave you the bug too go bigger. Great deal on them axles . That don't happen very offten. At lest not in my book.. I thought you had a bad ride before you started changing things. Bigger an better ==cl
nice k5
Shes almost ready, just waiting on the rear driveshaft, and I gotta make one for the front, get some shocks and she will be ready for T-Day! Got her on 32" rollers for now
Lookin good! Gotta love those K5s!
look nice
Did you take a die grinder too your front shaft an cleaned the points were it would hit. Are you running a double velocity in your front shaft. Truck look's Bad A** . Love the plate. I got MUD TOY for my plate on truck LOL Personal plate just a nice added touch.
I was talkin to BogginJoe when I went over to buy some stuff off him and we got to talking about driveshafts and he told me that if you unbolt the front shaft from the diff and it can swing under the yolk that it would have enough flex, so I figured to see how bad mine is I went home and bolted it up to the t-case, and believe it or not it has enough flex on the shaft that I already had, only thing is it is about 3" to short, To be safe though im still gonna do some grinding. My rear shaft was at a bad angle to so I called up Tom Woods Custom Diveshafts and there sending me one, it got the double joint on it too
Ya a little grinding now will pay off in the long run. I know I had too grind every spot that would touch an you would not believe the difference it made in clearance from shaft binding at weird angles.
lookin good cant wait to see it at tday
Well had to rip the rear axle out to fix the leaf springs, they were bowed in, I i figured I would eliminate the 8 degree shim i put in and beef it up a bit so I did some work to the perchs I got and the blocks and re-angled everything. Ordered my new Eaton rims with enough back spacing to clear the dana 60 calipers, and got the Boggers mounted up. Picked up a extra set off Millser so I cut the lugs off and mounted em on the extra rims to run on the back! All I gotta do is bleed the brakes and power steering tonight and she will be ready for T-Day!! yeahh
==cl
Looking realy good. l like how you redid your lift block spring pad.
Got Her Done! Lil left to do, shocks and front driveshaft but shes streetable, Great time at T-day!
looks like u had a blast at tday.. seen u out there
like those older Blazer's!
I missed seein you at tday prolly cuz i didnt move to much broke but i like that blazer
Quote from: Gearz on November 26, 2009, 04:33:45 PM
Looking realy good. l like how you redid your lift block spring pad.
==kp
chevy boyz know how to do it right chevgal chevgal
All you need now is some 2.5 ton rocks and some tractor tires...
Quote from: bigmike on January 25, 2010, 04:37:02 AM
All you need now is some 2.5 ton rocks and some tractor tires...
I gotta agree with ya!
Quote from: bigmike on January 25, 2010, 04:37:02 AM
All you need now is some 2.5 ton rocks and some tractor tires...
no way 44s and big hp and you will be all set!!!! tractor tires break too much stuff!!
This is true
nothing like big hp and 1tons with 44s!!!!!
Its funner to go over the hole than to crawl threw it unless your hooper. lol...
yep you wont get the wheel speed with rocks!
We will see about wheel speed there betterbeaters..
shes a lil heavy to skip across the top, had her weighed in last summer at 6,400lb and that was with the 6" on 36.5's on half tons, now with the 12", 1 tons and hopefully some 44's she might be pushing 7 bills, I wanna go rocks and tractors on my 87 Ram though!
Quote from: bigmike on January 26, 2010, 08:09:04 PM
We will see about wheel speed there betterbeaters..
see ya in a swamp!
this looks like it's gunna be a fun season ;D
Can't wait ==beavis
thats not true hp 44's rocks = wheel speed too just gotta have the right gearing example matt wallace and his s10 0:40
http://www.youtube.com/watch?v=w3BYEqqonBQ
Quote from: betterbeaters on January 26, 2010, 06:53:51 PM
yep you wont get the wheel speed with rocks!
Might be doin some work to the rig soon.......mabey a few tricks for this season
Quote from: bigmike on January 25, 2010, 04:37:02 AM
All you need now is some 2.5 ton rocks and some tractor tires...
What the hell why not... Got me some 2.5 ton Rocks in a trade! Thanks Bigmike! Bought some 16.9x26 v-trads from Grant and gettin centers done by him too, thanks 78Chevy! Gonna have Wildtime build me some backets for my link bars, 22" lift on a k5! Yee-Haw! Top of wheelwells should be bout 5'8" just a lil fella
more pics
==thumbsup
the new tire, gonna beefup the 406, new dart heads, rad exhaust uprights, new nasty cam and a 100 shot of Nitrous
i like the cut job on the tires, did you cut them tires your self? how deep did you go? what brand or type of grover did you use. thanks
Grant started it, I'm gonna have to finish em, I'll talk to him and let ya know
Cool thanks, i have a set of 19.5-24's i want to cut the snot out of.
truck should be pretty wicked!! I have allways liked the rocks on a shorter wheelbase. Looks like progress is going pretty fast. Do it while the weather is good!!!
wow looking good
Beef up the 406??? Just a little guy.. I see you won't be able to play with the big dogs because you are still going to be pissing like a pup.. Until you get big block..
applaudd
Quote from: bigmike on March 18, 2010, 02:10:22 AM
Beef up the 406??? Just a little guy.. I see you won't be able to play with the big dogs because you are still going to be pissing like a pup.. Until you get big block..
big blocks are gay in my opinion............. i like the rpm's of a sbc.........
Yea but with a tractor tire truck yóu want toqrue..and you will never get the torque out of a small block like you can with a big block..
Quote from: bigmike on March 18, 2010, 03:03:13 AM
Yea but with a tractor tire truck yóu want toqrue..and you will never get the torque out of a small block like you can with a big block..
As Much as I like my small block ya are right, prob not this season but we'll see
==what Hell ya man !! Some big up grades
trucks commin along great! gonna be a fun summer for you!
dont worry about the small block. Just get her together and work out the bugs and test and tune her. Motors are easy to swap. I built mine with crapy 350 originally and swapped out to the bbc when i got the funds. It's fun even when you dont have the motor you want to. You will have a blast either way. Unless you are bill Gates, there is allways going to be someone out there with a bigger, badder truck. As long as you are happy with it and having fun thats all that matters.
Quote from: 78Chevy on March 19, 2010, 02:08:22 AM
dont worry about the small block. Just get her together and work out the bugs and test and tune her. Motors are easy to swap. I built mine with crapy 350 originally and swapped out to the bbc when i got the funds. It's fun even when you dont have the motor you want to. You will have a blast either way. Unless you are bill Gates, there is allways going to be someone out there with a bigger, badder truck. As long as you are happy with it and having fun thats all that matters.
Well said, I rather bog with something thats not quite done than sit and watch. Lookin great, can't wait to see what those axles will do for ya.
Quote from: 3+3 on March 19, 2010, 02:54:32 AM
Quote from: 78Chevy on March 19, 2010, 02:08:22 AM
dont worry about the small block. Just get her together and work out the bugs and test and tune her. Motors are easy to swap. I built mine with crapy 350 originally and swapped out to the bbc when i got the funds. It's fun even when you dont have the motor you want to. You will have a blast either way. Unless you are bill Gates, there is allways going to be someone out there with a bigger, badder truck. As long as you are happy with it and having fun thats all that matters.
Well said, I rather bog with something thats not quite done than sit and watch. Lookin great, can't wait to see what those axles will do for ya.
X2
Hmm sounds like maybe I should listen to these guys..
Quote from: 3+3 on March 19, 2010, 02:54:32 AM
Quote from: 78Chevy on March 19, 2010, 02:08:22 AM
dont worry about the small block. Just get her together and work out the bugs and test and tune her. Motors are easy to swap. I built mine with crapy 350 originally and swapped out to the bbc when i got the funds. It's fun even when you dont have the motor you want to. You will have a blast either way. Unless you are bill Gates, there is allways going to be someone out there with a bigger, badder truck. As long as you are happy with it and having fun thats all that matters.
Well said, I rather bog with something thats not quite done than sit and watch. Lookin great, can't wait to see what those axles will do for ya.
Hopfully they will make me pull ya around come 4-H time this year :D
x3
Quote from: Rollover Herb on March 19, 2010, 03:13:38 AM
Quote from: 3+3 on March 19, 2010, 02:54:32 AM
Quote from: 78Chevy on March 19, 2010, 02:08:22 AM
dont worry about the small block. Just get her together and work out the bugs and test and tune her. Motors are easy to swap. I built mine with crapy 350 originally and swapped out to the bbc when i got the funds. It's fun even when you dont have the motor you want to. You will have a blast either way. Unless you are bill Gates, there is allways going to be someone out there with a bigger, badder truck. As long as you are happy with it and having fun thats all that matters.
Well said, I rather bog with something thats not quite done than sit and watch. Lookin great, can't wait to see what those axles will do for ya.
X2
Hopfully they will make me pull ya around come 4-H time this year :D
[/quote]
Your going to have to gain some major weight if you want to pull my tank. I can't wait to see that hillbilly anouncers face when 20 trucks with tractors show up. It's gunna be fun.
Hell yea, my neighbor is real high in 4-H so Im gonna try and get em to either add a class or have combine the 3/4 and 1 tons and make the outlaw class for trucks with rocks, I aint no lightweight like last year, yea that would be sick if we got that many trucks!
Got The front done and 40" rollers on (Thanks MUDMAN) Gonna start on the rear tonight, makes them 35" boggers look small ;D GotMud?
looking good
Wow man, looking good! Nice work and when I'm ready to do mine, I know who to call!! loll
was over there tonight and it still looks sissy..
lol
Quote from: bigmike on March 27, 2010, 01:41:45 AM
was over there tonight and it still looks sissy..
glad i could help ya out lookin real good GotMud? GotMud?
cool keep on it
==thumbsup
Very nice! I missed that you went to Rocks! Very nice.
Got the Rear in yesterday....
Were the spring pads already welded on?
Shes all on rollers, just needs driveshafts, brake lines, steerin hooked up and exhaust
Quote from: four_by_ken on March 30, 2010, 12:29:01 PM
Were the spring pads already welded on?
yep all bolt in thanks to Bigmike and Wildtime
Or just flip the hubs. Surprised they are not already done?
Quote from: four_by_ken on March 30, 2010, 09:48:35 PM
Or just flip the hubs. Surprised they are not already done?
That was gonna be the plan
Gonna try and get they hydro steering set up tonight, Gonna have the link bars shortened probably Monday or early next week and get a cradle for em
Got the hydro steering hooked up, fabed up the old bracket off the stock gear box to work with my orbital valve, and built by hybrid Blazer-Deuce Front Driveshaft. Worked out good the stock rear shaft fit perfectly into the military shaft!
lookin bad ass man, making some real progress, cant wait to see it rip
Props to MUDMAN for being the first to point this out...The driveshaft pic is the front shaft but I used the top of the old rear which still had the slip joint on it, I gotta press it off and install the double joint for the front lol
Thanks Rick, Hopfully be done soon, Just needs a break line, body lift and some hydro fluid and it should be ready. Ordered the uprights should be here within 5-7 business days
I have a bucket of hyrdo fluid that you can steal some from.. Since I am going hyrdo steer to now..
I passed your house on the way to my wifes aunts house for easter.
rigs looking good it should be one hell of a boggin season
Yea tell me about it.. But I will always be there to pull you out..
sweet! rocks are in!
i have a 3" body lift ill sell ya for 50 brand new in box performance accesorie's brand i got it for my 89 but traded the blazer off befor i installed it and it look's sweet make's me miss all 3 of my old one's loll
BAD ASS MAN, YOUR DOING A GREAT JOB ==np
wish my k5 would grow up lol
Quote from: Boggin Joe on April 07, 2010, 02:19:30 AM
BAD ASS MAN, YOUR DOING A GREAT JOB ==np
wish my k5 would grow up lol
Thanks Man! Few Months ago I was saying the same thing when I saw yours
Quote from: Boggerram87 on April 07, 2010, 12:27:25 PM
Quote from: Boggin Joe on April 07, 2010, 02:19:30 AM
BAD ASS MAN, YOUR DOING A GREAT JOB ==np
wish my k5 would grow up lol
Thanks Man! Few Months ago I was saying the same thing when I saw yours
LOL yep
Thats gonna be huge when its done, keep up the good work.
Steering is primed and workin great, after a lil leak in one of the couplings, uprights came in! did some test fitting...gonna need a lil tweak but gonna be sick, Should be getting the tires and my trailer from Grant this weekend too! Pics up on Monday when I get to a comp
Looking damn sexy!!!!!
looking great!!!!! I like it a lot.
Well I got the headers in the mail the other day, did some test fitting.....gonna need a lil here and there but over all gonna be sick! Tires are gonna be at the house tonight along with my trailer! ++peace
looking sick
==cl
Grant got my centers all done up yesterday and they look GREAT! Had a hell of a experience loading my trailer loaded with tires onto Grant's goose. Big Thanks to Mike, Grant and Stan to get em over to my house
Terras on a k5 is gonna be crazy!
==cl
mount em up and see how they look ... w those terras u ll be floating
Thats the idea lol I gotta weld on the new longer wheel studs on the front, should have em on tonight ai'll have pics up tommorow
How strange... I was just talking with some guys about wiiiide tractor tires.
Got the Terras on yesterday, still got a lil work on her but the end is in sight! GotMud?
sweet!!!
Looking good applaudd
Sweet!
dam thats a big uker looking badazzz man ==kp ==kp
When do you think will be the first time out?
looks great !!!!!me and forfun need to get his going.the SS bogger project build(as soon as we get my s10 and his boys ford done I guess)I have been watching the build good job
nice clean build!
awesome , looks like it will float nice
Quote from: four_by_ken on April 22, 2010, 01:02:07 PM
When do you think will be the first time out?
Got alot of factors on that...truck will be done sooner then later, still gotta put new ties on the trailer, rewire it all, put a new crank lift on it, and weld on safety chains. And I don't have a tow rig, cant buy one till my orange truck sells
Quote from: BOGIN4D9 on April 22, 2010, 03:07:52 PM
looks great !!!!!me and forfun need to get his going.the SS bogger project build(as soon as we get my s10 and his boys ford done I guess)I have been watching the build good job
saw that gonna be sweet
Quote from: Trent on April 22, 2010, 02:44:08 PM
thats badass, cant wait to see it throwin mud ++peace
You and me both!
Had to change the profile pic......I got Grant status now ==roll
does it float, lol cool Blazer!
Quote from: Boggerram87 on April 22, 2010, 06:29:33 PM
Had to change the profile pic......I got Grant status now ==roll
Just so ya know, Right now Grant status is not running and under construction. Looks good though.
Quote from: 3+3 on April 22, 2010, 11:10:39 PM
Quote from: Boggerram87 on April 22, 2010, 06:29:33 PM
Had to change the profile pic......I got Grant status now ==roll
Just so ya know, Right now Grant status is not running and under construction. Looks good though.
Ya well stan status is the same. At least i got 72's stan! ==roll
Holy crap batman! That's the good p00 I'm talkin bout! Ill trade ya axles tires and wheels lol! I wanna see that thing rock cme mud. Id cut the crap outta those things and make em real slingers lol!
Sweet!!!!! Man I've seen those frt tires somewhere before LOL OH!!!! I remember
(http://i224.photobucket.com/albums/dd294/wildtyme/100_2200.jpg) (http://i224.photobucket.com/albums/dd294/wildtyme/100_2200.jpg)
They've gotten around, You'll have fun with them, that truck should stay on top pretty good!!!
Lookin good!
looks like you need more lift in the rear but its lookin sweet
Yea, front has 19" and rear is at 15", I was gonna swap out the 6" rear springs for 8" but I'm thinking about just getting some 10" made by ab spring for the rear, plus add 3" for the body lift, gotta be able to clear the other 54" tractors
==thumbsup
Quote from: Boggerram87 on April 26, 2010, 03:31:25 AM
plus add 3" for the body lift
still got it waiting loll look's sweet keep up the work
Quote from: camok10 on April 26, 2010, 03:09:36 PM
Quote from: Boggerram87 on April 26, 2010, 03:31:25 AM
plus add 3" for the body lift
still got it waiting loll look's sweet keep up the work
Sometime this week! I'll shoot ya a text or call ya when I know for sure
Got the 53's mounted up for a test fit, Lookin like gonna need them springs sooner then later! Gonna clean up and finish painting the rims tonight, Gonna try and get the rear hubs flipped tonight too. Got the temporary tow rig too loll
Need a pic of ya standing next to it for size referrence! Man, looking good though.
Quote from: CBakes on April 28, 2010, 03:45:51 PM
Need a pic of ya standing next to it for size referrence! Man, looking good though.
Only one I got like that is my mom standing next to the terra's....
hey are you gonna flip your rear hubs?
Quote from: Boggerram87 on April 28, 2010, 04:54:51 PM
Quote from: CBakes on April 28, 2010, 03:45:51 PM
Need a pic of ya standing next to it for size referrence! Man, looking good though.
Only one I got like that is my mom standing next to the terra's....
See....looks way different with someone standing next to it! Sweet!
Yea flipping hubs tonight hopfully i aint leaving it all goofy like that
you should trade me for some one tons and 35's hahahaha! that thing is killer lookin! great job on the build. hope it dont buck you outa the cab like other leaf sprung trucks ive rode in. cant wait to see that thing float.... i mean bog!
man its bad ass
==cl
get r done !
Quote from: Boggerram87 on April 28, 2010, 05:47:43 PM
Yea flipping hubs tonight hopfully i aint leaving it all goofy like that
hey you never know!!
Dont flip them... different track width front to rear could be a good thing.
Is it an optical ilusion on the rear because you dont have the hubs fliped or is the axle forward in the wheel well?
I like the look of the 48's better than the 53's. got to love wide tires. keep up the good work.
Quote from: Boggerram87 on April 28, 2010, 02:49:55 PM
Quote from: camok10 on April 26, 2010, 03:09:36 PM
Quote from: Boggerram87 on April 26, 2010, 03:31:25 AM
plus add 3" for the body lift
still got it waiting loll look's sweet keep up the work
Sometime this week! I'll shoot ya a text or call ya when I know for sure
sound's good, im on second shift now so leave for work at 230ish but have fri sat and sun off
man i really wish i still had 1 of my k5's still look's sweet on the tractor's
looking good
Quote from: four_by_ken on April 30, 2010, 04:40:54 AM
Dont flip them... different track width front to rear could be a good thing.
Its a lil too offset not to it just looks bad
Quote from: blazentrout on April 30, 2010, 05:35:03 AM
Is it an optical ilusion on the rear because you dont have the hubs fliped or is the axle forward in the wheel well?
I like the look of the 48's better than the 53's. got to love wide tires. keep up the good work.
Its a lil of both, when I did the shackle flip it moved it ahead a lil but its a pretty extreme diffrence in width
Got the flames drawn out for the hood im gonna cut up and add a scoop too, Got the 10" springs last night too from AB Spring, should have em on tonight, started painting the rims too
looking bad ass to me loll
wow...lookin real good man, keep it up that things gona be bad ass for sure
Got the New rear springs in! Clears the tires Ok for now, still need the body lift to run em. Lookin real good to be done by opening day....well done enough to run ++peace
lookin good!
do they look flipped?
Looks good man !!! You've been busy
Quote from: wildtime on May 10, 2010, 03:46:19 AM
Looks good man !!! You've been busy
Been Trying to keep busy on it
Quote from: Trent on May 09, 2010, 05:42:29 PM
did ya flip the rear hubs yet or no ???
Pretty fun story on that, I had em all tore down tried to do it, tried hammering one out, it screwed up one of the treads so I stuck a lug nut on it to give more pressing surface and put it in the press, cranked it down and POW, I was like hell yea finally broke loose, .......nope ==censor ==censor Damn threads just snapped off, Got pissed and just stuck the damn things back on without flipping em. So I gotta pull the old ones off the front and stick em on the back and put the new longer ones on the front. Ya cant tell the difference without the flip with the terras anyway, so I'm gonna tackle that after opening day
thats a nice looking blazer you built
Well had a lil issue with the front shaft I built.......seams as if I forgot about the damn Ball & Socket in the middle of the double joint ==doh ==doh so not having it made it real real sketchy, floping around all over...Got back to the drawing board last night and just went the easy route and cut the welds on the shaft and lengthened it to eliminate the double joint up top....One less thing to break. Took some time and grinding but its ready to rock! ==roxs Gotta run out tonight and get steel to lengthen the rear and get my brakes done. Hello Opening day! ;D GotMud?
Wicked machine....Love the flames
that is one good lookin rig
Got The rims Painted! And The a=f On the Back! ++peace
are the rims in the front same as the back?just look bigger. might be the angle of the dangle
Same size but diffrent rims
lookin good!
==kp applaudd ;D ==wgm
==kp
Very nice! When is testing day?
Testing day has come and gone. Ran her at TAMR Comp bog, did ok, shoulda ran the r1's instead of the terra but still had a blast, followed it up the next day at the mounds.....had a great time but truck didnt do so well. Got a escort fro Cory, powersteering pump was whining all the way out to the rock pile, stopped to check it out and the fluid was damn near boiling, I spit on it and it sizzled loll So we were sitting there letting it cool off and a Suburban got stuck in front of us, so I gave him a tug and the trans snapped and fluid started pouring out! Watched the rest of the day and babied it back in. made 2 attemts to get truck on trailer and it started slippng because all the fluid was gone so the old man ran up to get more, we were getting everything lined up for one last shot at getting it on so we jacked up the rear end to slide it over a bit and found out that the weld in the rear axle broke so I gotta tear that down and reweld it! Rough start but its bound to happen on a new rig. Gonna put a new pump with cooler on, and go with a 400-200 combo to replace the 700-208! I'll get pics up asap
You are running hydraulic steering, right?
Yes sir!
Got the 700r4-208 Out and picked up my th400 and Np200! Thanks Mud_for_fun! Time to start Fab'ing up crossmembers and driveshafts!
You going to make it to the Budget Boggers bog with the Blazer?
Quote from: four_by_ken on July 11, 2010, 04:37:09 PM
You going to make it to the Budget Boggers bog with the Blazer?
I would like to take it out there and do a lil test running on it but I got my cousins openhouse down in Mt Clemens, so we'll see, might try and ditch early or go later on.
Got The trans yesterday, didn't realize how long that 2wd th400 was, gonna be cutting it close! Rear driveshaft is only gonna be around 25" long. I did some calculations and I gotta go out and buy 35' of 2x2 steel to build the cage to hold in the new np200 and 2 sheets of 14x30" 3/8" steel to build the cradle for my link bars once there shortened, Not looking so good to be ready for the 4-H fair this friday night!
Quote from: Boggerram87 on July 13, 2010, 12:15:30 PM
Quote from: four_by_ken on July 11, 2010, 04:37:09 PM
You going to make it to the Budget Boggers bog with the Blazer?
I would like to take it out there and do a lil test running on it but I got my cousins openhouse down in Mt Clemens, so we'll see, might try and ditch early or go later on.
Got The trans yesterday, didn't realize how long that 2wd th400 was, gonna be cutting it close! Rear driveshaft is only gonna be around 25" long. I did some calculations and I gotta go out and buy 35' of 2x2 steel to build the cage to hold in the new np200 and 2 sheets of 14x30" 3/8" steel to build the cradle for my link bars once there shortened, Not looking so good to be ready for the 4-H fair this friday night!
That's a bunch of crazy work!! Can't wait to see the progress...and remember, you can always make 2 copies...one for this guy!
Cracked the housing alright and looks like it got a lil hot in there! Got the old stuff out and putting new stuff in!
The trans is already built?
i'll sell you big mikes mount for that np 200? i dont need them.
Quote from: llewis660 on July 23, 2010, 11:07:28 AM
i'll sell you big mikes mount for that np 200? i dont need them.
Nope Im good, building my own, the set up is different, Thanks Though
I would have been but I ran into a lil delema on Sunkist this morning, was turning onto my road and the axleshaft and tire decited they didnt wanna stay with the truck so they went there own way, musta broke the c clips in the axle....how I dont know
fordd
Quote from: Boggerram87 on July 24, 2010, 03:46:38 PM
I would have been but I ran into a lil delema on Sunkist this morning, was turning onto my road and the axleshaft and tire decited they didnt wanna stay with the truck so they went there own way, musta broke the c clips in the axle....how I dont know
What is a 200 t case????
It is a np200 drop case I believe it is out of a 1 1/4 ton dodge military truck.
Are they divorced???? What gearing compared 2 208??
Yes they are a divorced case. Gearing I think it 2:1 or close to it..
The 208 is 2.69:1 and the 200 is 1.96:1
Some pics of the cradle Im building to hold the 200
a=f Hoping to be done soon!
Quote from: 3+3 on July 24, 2010, 05:18:39 PM
fordd
Quote from: Boggerram87 on July 24, 2010, 03:46:38 PM
I would have been but I ran into a lil delema on Sunkist this morning, was turning onto my road and the axleshaft and tire decited they didnt wanna stay with the truck so they went there own way, musta broke the c clips in the axle....how I dont know
==sa loll
no ones asked bout the blue bottle yet. are ya puttin it in there? aree ya going to latson rd this weekend?
Quote from: J.C. on July 27, 2010, 04:17:36 PM
no ones asked bout the blue bottle yet. are ya puttin it in there? aree ya going to latson rd this weekend?
That lil guy.....dont worry bout that lil guy loll If the trucks done then I'll get goin down to Yankee Lake...either way still not lookin good seams how I aint got a tow rig yet, got approved for the loan and all but the madre wont co-sign until I sell Sunkist
Quote from: Trent on July 27, 2010, 07:17:09 PM
Quote from: Boggerram87 on July 27, 2010, 07:13:37 PM
Quote from: J.C. on July 27, 2010, 04:17:36 PM
no ones asked bout the blue bottle yet. are ya puttin it in there? aree ya going to latson rd this weekend?
That lil guy.....dont worry bout that lil guy loll If the trucks done then I'll get goin down to Yankee Lake...either way still not lookin good seams how I aint got a tow rig yet, got approved for the loan and all but the madre wont co-sign until I sell Sunkist
lets just tow it down with RECKLESS, lmfao, we would make it to the party store on the corner, haha
That would be a sight to see!
nice ride
Haha Trent! I like the way you think, we can load all 4 tractors in the back and tow it on the rollers! If we leave now we can make it! Might add the blue bottle to sunkist if were goin that route loll
UPDATE.
What did u do with those 1 tons?????????
sold/traded them to me for the 2.5 tons
Oh I see
No more progress????
Been slowly gettin back to it, cash ran a lil slow so I had to slow down a bit. Did pick up a 3,200 stall for the trans though, Still lacking a tow rig too so thats another buzz kill but been re-inspired after Perkins bog to get on it and get it done!
I really want to know how you like those wide tires. I keep coming back to a similar idea for my own.
Quote from: four_by_ken on September 14, 2010, 04:53:32 PM
I really want to know how you like those wide tires. I keep coming back to a similar idea for my own.
wide tires are the whip! i had some on the gold truck. see sig
Ive only really ran em once but I would say totally worth it, if your gonna run in alot of clay I would stay away but other then that your good.
What size/ kind are ya thinkin?
Quote from: Boggerram87 on September 14, 2010, 07:04:32 PM
Ive only really ran em once but I would say totally worth it, if your gonna run in alot of clay I would stay away but other then that your good.
What size/ kind are ya thinkin?
48x25 or 48x31... Depending on what I find.
everyone I talked to didnt like the super wide 48x31s said they dont bite enough floating on top... but I would think they would be good!
Talking to a guy down in Naples Florida bout trading my 16.9's for some V-tread 48x31x20! We'll see what happens!
Got The Chunk Pulled outta the rear yesterday.......nice lil pile of broken weld at the bottom of the pig
Got The "Custom" Outdoor Terra Table Workbench loll
Just got bored takin a break so I shot a few more pics a=f
Lookin sweet....
Quote from: Trent on October 12, 2010, 04:18:05 PM
lookin pretty damn good, now i just gotta see it run in person ++peace
When do you anticipate having it back together to run?
I aint sayin 100% but it could be at Al's on the 23rd if I put in some work! I got the modivation back!
Quote from: Boggerram87 on October 13, 2010, 11:55:19 PM
I aint sayin 100% but it could be at Al's on the 23rd if I put in some work! I got the modivation back!
That would be sweet! I'll be there! Stay motivated!
Now that you said there is a chance that you'll be at Big-Al's with it, we're gonna keep on ya!! loll ==dj
Quote from: Trent on October 14, 2010, 12:48:25 AM
Quote from: CBakes on October 14, 2010, 12:47:48 AM
Now that you said there is a chance that you'll be at Big-Al's with it, we're gonna keep on ya!! loll ==dj
your damn right we are, i think it should text him everyday and bug his ass, hahaha
Sounds like a plan! No wait, if we text him, he'll stop working to check his phone...
Its a CHANCE no guarentees! loll A Guy Can Hope! Thanks For The Hope Mud King!
I wanna see this k5 run too...try n make it to als
Sweet rig! ==kp ==wgm
Quote from: Boggerram87 on October 14, 2010, 05:03:52 AM
Its a CHANCE no guarentees! loll A Guy Can Hope! Thanks For The Hope Mud King!
Would love to see it run! What you are going to be runnin is pretty much what i was changin my truck to, until i went to the planets. You know that because u got it from me lol. Dont let us down. Less Jack D. on friday and more wrenchin. I got a halogen light if ya wanna work through the night. Ya know i have done it my fair share. LOL you went to tgw with me after an allnighter.
True true!! It will be done if I have anything to say bout it! Got the cradle all set up, ran outta steel & need the yolk to make the baby shaft for the t-case, makin a run tommorow, thats a big step!
I'm debating if I should put in that 3000 stall for Al's or just run stock, opinions?
I say if you got time then go ahead. Let me know if ya need any help with it, got a funeral this weekend and working on the barn butbif ya need somethin im there. I'm always there as the tech support too. Lol. Gettin wiring in the barn for good thisbweekend, so bring that chunk over early next week.
Put the stall in.... I run a 2000 stall and love it
Its just a time thing, the trans is in the truck with the stocker, i would have to pull it and swap em if I wanna run the stall, and the compresser is shot so its kinda hard, focusing on t-case for now
Quote from: Boggerram87 on October 15, 2010, 05:00:27 PM
Its just a time thing, the trans is in the truck with the stocker, i would have to pull it and swap em if I wanna run the stall, and the compresser is shot so its kinda hard, focusing on t-case for now
Yeah, just get your cradle set up then you can go back at some point to change the stall. Plus, less work means better chance it makes it to Big-Al's!!
no excuses now! ill haul it for ya! balls to the wall till friday!!!
Hell No I Ain't Makin No Excusses! I Aint Missing This Deadline! Cradle Is In Place Just Building The Mounts For The T-Case! That Will Be Done Tommorow, Driveshafts Monday, Its Coming Togther!
Ran Outta Light! I Need Stan & Grant To Come Over And Have Another "Who Has The Brightest Phone Flashlight" Contest! loll I Took 4 Days Off This Week So I know I'm Gonna Have Time
Come on now when u get a competitive group of guys you know a who has the brightest phone light contest is gonna break out.
Quote from: MUD KING on October 17, 2010, 12:14:48 AM
Come on now when u get a competitive group of guys you know a who has the brightest phone light contest is gonna break out.
True! ==ha I was dying when I read that! Stan does have the better phone flash light but that damn lil 1 LED light ya got is sick!! a=f
So did you make it to Als or not? LOL!!! Nice project man!!!!
Thanks! I Didnt Go To Al's First Bog But I'm Shooting To Make It To His Bog On The 23rd!
What are you running for motor that you need a 3000 RPM stall converter?
Bringin it out to als?????
Quote from: four_by_ken on October 22, 2010, 01:10:49 AM
What are you running for motor that you need a 3000 RPM stall converter?
What do you mean? Do you think it is too big? That is just a baby converter. All the real runners are way taller than that.
Quote from: MUD KING on October 22, 2010, 02:05:42 AM
Quote from: four_by_ken on October 22, 2010, 01:10:49 AM
What are you running for motor that you need a 3000 RPM stall converter?
What do you mean? Do you think it is too big? That is just a baby converter. All the real runners are way taller than that.
I just have no idea what motor he has in it. Hearing he wanted to put a 3000 rpm coverter in it, I would assume he has at least a little work done to it, no?
Ideally, you want as low of an rpm converter as the motor will work with. You want the wheels to spin at as of an low of an rpm as possible.
Quote from: MUD KING on October 22, 2010, 02:05:42 AM
Quote from: four_by_ken on October 22, 2010, 01:10:49 AM
What are you running for motor that you need a 3000 RPM stall converter?
What do you mean? Do you think it is too big? That is just a baby converter. All the real runners are way taller than that.
not all the real runners have big converters!!!!!!!!!!!!! most or the guys I know with big motors runs a 3500 and smaller!!!
Big converters are only needed with big cams where the engine doesn't make power till up high in the rpms.
Well converters depend on alot of variables. Gearing, motor, application. If you want to do anything but run wide open, then a big stall isn't for you. I know some of the baddest rucks around here are runnin 4500 +. When you see some guys launch and the mud just flies of there tires, like a dog shakin when it gets wet, how do you think they get all that instant wheel speed. My favorite part of my truck, Flash Stall. Of course there are some pretty heavy down sides, ALOT OF HEAT in the tranny, Broken parts, and basically when ur in anything thick you gotta lock up your converter to go anywhere at all, which means wide open and intsant wheel speed, if nothin breaks.lol
I agree 100%.
But it all comes down to your motor and where you start to produce power. If your motor runs out at 4500, a 3000 stall is a little high in my opinion. Those numbers were just tossed out for discussion. Well unless you have a real narrowed power band like 3000 to 4500.
the stall on the converter is variable anyways, if you put a 3000 stall on a 250hp engine it will lock in 2800-3000rpm if you put the same converter on a 500hp motor it wont lock up til 3500-4000rpm.
Im not much for automatics but I'd think a high stall in a bogger would be a good thing, get the rpm's up there before it trys to spin the tires ==dunno my trucks are all wrap it up n dump the clutch :P
406 Small Block, Its got some work to it but nothin to crazy yet, 3000 will drop it in a pretty good spot in the powerband
Truck aint gonna make it to Al's.............. ==idunno
Damn, I wanted to see that thing run
I run a 2000 stall....and it kicks in bokut 2500::::::...I love it
my motor makes power 4500 and up (I have dyno papers to show it) and I run a 3200 its a little dogish down low but work great and I dont have stupid heat in the trans from running in the converter driving it around before I jump in it.
sorry to hear it wont be there...but you gave it one hell of a good try
have a 3500 stall in my truck and my motor just a had a decent cam and valve springs and it worked very well
Got The Rear Chunk All Welded Up (Thanks Grant!) T-Case Is Mounted, Gotta Reassemble The Rear End Tonight And Start Workin On Some Driveshafts To Make It To T-Day!
Make it happen!
how did that yoke work out for ya bud?
Nope he's not gonna make it. Just was textin with him
Hows the sbc 400 working out for ya? i wanna build one but heard they over heat like crazy ==kp
Very happy with my engine, never had a overheating problem at all!
Anyone Interested In Buying The Truck... PM Me!
Quote from: Boggerram87 on December 17, 2010, 07:17:58 PM
Anyone Interested In Buying The Truck... PM Me!
ok bigmike! loll ==jk
I dont wanna sell it but I would so I can buy a house before spring! Not happy bout it!
Quote from: Boggerram87 on December 17, 2010, 07:25:09 PM
I dont wanna sell it but I would so I can buy a house before spring! Not happy bout it!
You'll find the money for the house and keep the truck......positive thinking right!!
Yeah dude keep that thing,
This truck is badass! Dont sell it man. youll get the money ==np
As Seen In The For Sale Section!
Welp.. At The Rate Its Selling Looks Like I'll Still Be Boggin This Year! ......And I Couldn't Be Happier! ;D GotMud?
Prob Pull The Trans Out And Go Through It And Put The New Stall Converter In The Get The Linkage Fixed On The Shifter Once It Warms Up A Bit ==cold
==sm cool!
Sounds good, knew you'd come to your senses!!! haha
very nice!! Id like to see this thing run too!! keep up the good work and take your time. always better not to rush things too much..
Any progress?
Gotta Get The Tow Rig, Thats Gonna Be Priority, She Will Be At Yankee Lake For Memorial Day "Mega Truck Challenge" Though ;D Gonna Do A Lil Here And There To Give Me A Better Chance, New Cam, Maybe Heads
Hell yeah!
Damn I wanna go to florida with ya!
Got The Tow Rig! Time To Start Bustin ==kma To Get It All Done For Yankee Lake! Would Like To Take He Out Opening Day For A Mild Test & Tune Day!
bad ass give m a buzz if u need a hand or 2
Quote from: Boggerram87 on March 15, 2011, 07:47:16 AM
Got The Tow Rig! Time To Start Bustin ==kma To Get It All Done For Yankee Lake! Would Like To Take He Out Opening Day For A Mild Test & Tune Day!
X2!
Quote from: BIG TODD on March 15, 2011, 03:29:32 PM
bad ass give m a buzz if u need a hand or 2 Quote from: Boggerram87 on March 15, 2011, 07:47:16 AM
Got The Tow Rig! Time To Start Bustin ==kma To Get It All Done For Yankee Lake! Would Like To Take He Out Opening Day For A Mild Test & Tune Day!
Fired Her Up For The First Time This Year.....Still Running Like A Champ!!
Sweet man.
Playing Around A Lil Bit....... Shes Going Under The Knife As Soon As The Topkick's Ready! I Did Swing A Deal For Another Pair Of 48x31 V-Treads Too....Fishing Anyone? I Can Cruise Around With The S.S. Ducky! loll
what are you doing to it next?
sweet build
Quote from: professional grade on March 30, 2011, 04:12:39 PM
what are you doing to it next?
Link Bars, Trans Cooler, Trans Temp Gauge, Trans Is Getting A Valve Body, Flipping The Rear Hubs, Power Steering Pump W/Cooler, Adjust Shift Linkage, Finish Cutting Tires, And Paint The Rest Of The Rims...Lots Of Work In A Lil Time!
Quote from: Boggerram87 on March 30, 2011, 09:29:04 PM
Quote from: professional grade on March 30, 2011, 04:12:39 PM
what are you doing to it next?
Link Bars, Trans Cooler, Trans Temp Gauge, Trans Is Getting A Valve Body, Flipping The Rear Hubs, Power Steering Pump W/Cooler, Adjust Shift Linkage, Finish Cutting Tires, And Paint The Rest Of The Rims...Lots Of Work In A Lil Time!
your laundry list is sounding like mine.
are you thinking about dulleys?
Maybe If I Can Find Another Pair So Its Duals Front And Rear ;D Something To Toy With When I Got Free Time, I'll Have 6 Of Em After Yankee Lake
Sweet
Let's go fishin! Lol
Got The Th-400 Pulled Out And Installed A Full Manual Valve Body And Got My 3000 Stall On It And Got Her Back In The Truck, Just Gotta Order Some Braided Steel Line To Get The Cooler Hooked Up!
Took The Time While It Was Out To Weld In A Drain Plug...
Just Drop The Pan Again And Gotta Weld In The Bung For The Temp Gauge...
Took Some Pics After I Reinstalled The Trans..
Got The Link Bars All Measured Out And Should Be Cutting And Welding Them Today!
Get er done!
I did my part getting you the extension cord for the welder, now get weldin boy!!!!
Sweet!.. hurry!
Quote from: MUD KING on April 19, 2011, 03:40:28 PM
I did my part getting you the extension cord for the welder, now get weldin boy!!!!
I Still Cant Reach The Truck Because The Damn Topkick Is In The Way loll
I'm Going... I'm Going!
I need to put a Manual Valve Body in my 400 too. Progress applaudd Nice hauler by the way too.
Thanks Man! Pluggin Along On Her, Trans Is In, Working On This Damn Shifter, Link Bars Are Cut And Re Worked, Hubs Flipped, Link Bar Tabs Are Cut Drilled, Trans Temp Gauge Is Ready, Rear Tires Are Almost Done Being Cut, Still Lots Of Work To GO To Be Ready For Yankee Lake! Needed To Take A Lil Stress Off With A Can Of Carb Cleaner ;D
==kp cookin up some hot dogs with that torch? ==mmm
A Mans Gotta Eat In His Barn Every Now And Then Right? loll
Link Bar Tabs Are Welded And Link Bars Are In, Power Steering Pump Is Rebuilt, Rims Painted, 16.9's Are On, MSD Is In And Working After A Lil Hick-Up (Thanks Grant & Lee), Got 12 Quarts Of Amsoil Super Shift Synthetic ATF, Ordered A New Bigger Trans Cooler With Fan And Braided Steel Line With Fittings, Building Rear Axle Lockout Blocks And Picked Up A Spare TH-400 (Thanks Roadkill23) & Extra Rear Shaft From Red Barn Customs! Been Kickin Some Ass!
Quote from: Boggerram87 on May 12, 2011, 04:47:14 AM
Link Bar Tabs Are Welded And Link Bars Are In, Power Steering Pump Is Rebuilt, Rims Painted, 16.9's Are On, MSD Is In And Working After A Lil Hick-Up (Thanks Grant & Lee), Got 12 Quarts Of Amsoil Super Shift Synthetic ATF, Ordered A New Bigger Trans Cooler With Fan And Braided Steel Line With Fittings, Building Rear Axle Lockout Blocks And Picked Up A Spare TH-400 (Thanks Roadkill23) & Extra Rear Shaft From Red Barn Customs! Been Kickin Some Ass!
Awesome man, can't wait to see her throwin and towin!!
Sweet!
Been A While Since I Updated Her But Shes Held Up Great Since Yankee Lake! Ran Great When Me And Mudman Loaded It Up, Got Down There And We Couldnt Get It To Run Worth A Damn, Had To Make A Quick Autozone Trip, Threw A Tune Up On Her And Got It Timed Up. Truck Ran Like A Top Thanks To Ryan (Mudman) And Grant (Mudking) Thanks Guys! Ran Good Enough To Finish In The Top 10 At The Mega Challenge, Ran The Piss Outta The Truck And The Only Thing That Happened Was Some Bent Rear Springs, Some Trashed Body Panels And Tweeked The Link Bars, Better Then I Thought! Its Still Drivable Though, Been Giving The Family Rides Down Our Road And Scaring The Hell Outta Em At The Same Time, Got Her Up On 2 Wheels Around A Corner Giving My Uncle A Ride loll .. I Was Thinking About Goin 4 Link On It But For Now Im Gonna Pull Them Custom Springs Out And Put In Some Stock 1 Ton Springs From Rangerwheelinmike This Weekend, Gonna Have To Build Some Frame Drop Brackets But Gotta Get Her Ready To Bog!
When u gonna get that thing to a bog?
Nope Not This Time
Progress?
Got The Springs Pulled And Ryan (Mudman) Is Re-arching Them For Me After Yankee Lake, Should Be All Put Back Together Tonight And Ready To Bog This Weekend! Cant Wait To See How She Does With Them Terras At A Play Bog!
Yes Sir I Am, Renting Me A 17' U-Haul And Trailer
Can't wait till Saturday bro! Gonna be wicked!
Quote from: Trent on August 18, 2011, 05:26:05 PM
HELL YA, your gonna give your lil buddy Trent a ride right too
dont forget to bring that chip for me
Ill prob bring some doritos loll
Truck Ran Great At Perkins! Had A Terrable Night Tonight....... ==otd ....... But Had A Good Time At The Bog!
kewl pics
Why did u have a terrable night?
My EX On My Truck At Perkins And The Truck At Home After.....
How does your blazer ride with the rocks and tractor tires
It rides better then stock.
mines a stiff ride with my 12 inch and im going to get rocks and tractors this winter so trying to see if its gone to be worse
Well, since that will make it not street legal, does it matter how it rides?? loll.
i guess not lol
Like A Caddy! loll
nice lol
Had A Blast At Sticks Of Romeo...Broke The Steerin Collum And Jumped It And Took Out The Rear Yolk On The T-Case... Next Time Someone Asks For A Jump I'll Ask Before I Do It....Expecially When There Askin For A Jump...Start.... loll Totally Worth It To Air It Out Tho! Guess Its Time To Upgrade...Might Call It A Season And Get Ready For Next Year........... a=f
Yeah dude, I totally thought they were tellin u to jump that hill loll. Oh well, what a ride. Too bad yer rig broke. But my boys and I thank u for the ride man. I'm really thinkin that maybe this winter if I can scrounge up a tow rig ill throw a bigger lift and some rocks unker my k5
Quote from: Blazin40s on September 25, 2011, 01:26:43 PM
Yeah dude, I totally thought they were tellin u to jump that hill loll. Oh well, what a ride. Too bad yer rig broke. But my boys and I thank u for the ride man. I'm really thinkin that maybe this winter if I can scrounge up a tow rig ill throw a bigger lift and some rocks unker my k5
If The Worst Thing I Broke All Year Is A Driveshaft And Steering Column I Can Live With That loll
Glad Ya Yall Had Fun, Thanks For The Ride In Yours Man, Always A Good Time In A K5....Thinking About Sellin Mine Tho
Again? Better wait till after tgw!
Quote from: Blazin40s on December 03, 2011, 07:27:13 PM
Again? Better wait till after tgw!
and maybe yankee lake mem weekend if they have another mega truck event.
If I Still Have The Truck You Know I Wont Miss It, They Are Gonna Have Another One But Idk If The Truck Will Be Mine
u selling it?
Yep...For Sale
7million loll
Quote from: BUDGETBOGGER03 on December 09, 2011, 07:49:52 PM
Quote from: Boggerram87 on December 08, 2011, 10:23:59 PM
Yep...For Sale
how mcuh u want?
Truck-$8000 (Thats What It Would Cost For Parts To Build It)
For $9000 You Can Have The Topkick And 23' Tri-Axle
Got Some New Rear Springs....Time To Start Tearing Down And Rebuilding!
whats the plan?
were you running 48x25 or 48x31s terras?? im getting a set for my truck and wondered about how much lift i would need for the 48s. also just read through the whole build and you have made alot of progress nice build shawn
Plan Is To Rework The Rear Suspension...Get Ride Of The V Bent 10" Springs, Frame Drop It And Run Stock Springs With Some Helpers....Maybe Make It A Lil Higher So I Dont Kill The Body Anymore When I'm Running The 16.9's, Get Some Shocks For It, Military Yolks For The T-Case, New Driveshaft, Got The New Balancer For The Engine..Gotta Put That On...Race Buckets With 5 Points And Beef Up The Cage Mounts A Bit
I'm Running The 48x31's, Lift Is Right About 19" In The Front (12" Springs, 7" Blocks) And They Aint Hit Yet....The 16.9's Are The Reason The Bodys All Tore Up. What Size You Gonna Be Gettin? I Love Them Terras! Thinking About Running Them At TGW But Not Sure Yet
Quote from: Boggerram87 on January 09, 2012, 05:43:17 PM
What Size You Gonna Be Gettin? I Love Them Terras! Thinking About Running Them At TGW But Not Sure Yet
Im hopefully trading an axle for a set of 48x25s im just trying to get an estimate on how much total lift ill need. i got big mikes truck and by the looks of it roughly has 3-4 inches of body lift i think. but it doesnt have rear hangers so i planned on getting some custom ones built by wiltime that have some lift built into do a shackle flip and some blocks
Hell Yea Man, Thats Gonna Be Pretty Official!
Welp Got It All Tore Down And Jacked Up Into It New Ride Height! Gonna Be Sick...Lifting It 6-10 More Inches....Pics Up Soon!
common slacker. get some pics
No Internet At My House Makes It Hard loll Only Time Im Ever On Is At My Cousins...And I Gotta Take Pics With My Phone Lol
Quote from: Boggerram87 on January 12, 2012, 05:01:07 AM
No Internet At My House Makes It Hard loll Only Time Im Ever On Is At My Cousins...And I Gotta Take Pics With My Phone Lol
well text me pics and ill post them! loll
Quote from: Boggerram87 on January 09, 2012, 05:43:17 PM
Thinking About Running Them At TGW But Not Sure Yet
you might want to think about running them at mega truck this year down at yankee lake, it might help you out, not unless you get hooked back up to that bus again.
Keep buildin this thing bigger and u might be able to keep up with my k5 in the mud..........lmfao!
loll Maybe Someday Rob....For Now I Guess Im #2
nice truck
Quote from: Boggerram87 on January 13, 2012, 02:11:49 AM
loll Maybe Someday Rob....For Now I Guess Im #2
loll.......now yer gettin it shawn! Lmfao
Pics! It Should Sit A Lil Higher Then That When Its Done.......Plus I Picked Up Some 18.4-26's! Thanks Donny! GotMud?
Does this mean you are going to stop feeding shetmetal to your tires?
not with those 58s loll
She'll Be Up Enough To Clear The New Meats
Sweet bro
very cool
Shawn you selling them lift springs?
Quote from: Boggerram87 on November 24, 2009, 07:29:01 PM
Well had to rip the rear axle out to fix the leaf springs, they were bowed in, I i figured I would eliminate the 8 degree shim i put in and beef it up a bit so I did some work to the perchs I got and the blocks and re-angled everything. Ordered my new Eaton rims with enough back spacing to clear the dana 60 calipers, and got the Boggers mounted up. Picked up a extra set off Millser so I cut the lugs off and mounted em on the extra rims to run on the back! All I gotta do is bleed the brakes and power steering tonight and she will be ready for T-Day!! yeahh
shawn is that just a cast block?
Yea I'm Sellin The Springs
nice gonna be cool jug head
Haha Thanks Buck! Welp Heres A Pic Of My New Springs In My Buddies Truck...Should Be Gettin Em Within The Next Week Or So...Hes A Good Dude..Even If He Is From Ohio loll GotMud?
Those will work better for you fer sure
18.4's Vs 16.9's And What It Will Look Like On The 18.4's a=f
hey i pmed you...
Springs Are Spoken For As Of Now...
Pickin The New Ones Up This Weekend!!
One More Pic Of What Its Gonna Look Like On The 18.4's (Front Is Still The 16.9's)
Couple More I Found From Yankee Lake Mega Truck Challenge (4 Wheel Burnout)
And A Screen Shot From Trents "Yee-Haw" Vol 2 At Perkins
Found A Few Old Ones Of When I Was Building The 406 Too GotMud?
Come a long way from 4"or 6" lift 10 bolt axles it had first time I seen it . ==band Killer job!
Bad a$$ k5 fo sho!
Quote from: Gearz on January 30, 2012, 03:31:48 AM
Come a long way from 4"or 6" lift 10 bolt axles it had first time I seen it . ==band Killer job!
Yea Defiantly A Bit Different loll Thanks Man
Got My New 16" Super Duty Springs! Time To Make Her BIG!
Pickin Up My New 4 Door F-350 Dually Next Weekend!
Quote from: Boggerram87 on February 10, 2012, 04:28:14 AM
Pickin Up My New 4 Door F-350 Dually Next Weekend!
p00 big money did you find a money tree? lol let me get a few leafs to plant at my place
new trail rig ==congrads ==roll
a=f
Quote from: Buck on February 10, 2012, 04:31:24 AM
new trail rig ==congrads ==roll
Still Only A 2wd Bucky...But My Milemarker 12000lb Winch Will Find A New Home On That Bumper To Pull Todd's Jeep Out loll Just Playin Todd
lmao ==roll ==roll
Quote from: Boggerram87 on February 10, 2012, 04:37:38 AM
Quote from: Buck on February 10, 2012, 04:31:24 AM
new trail rig ==congrads ==roll
Still Only A 2wd Bucky...But My Milemarker 12000lb Winch Will Find A New Home On That Bumper To Pull Todd's Jeep Out loll Just Playin Todd
that's overkill for Todd's jeep, you could use that to pull Todd's jeep and "no show Bucky's" truck out when they are hooked together.
cool
cool ford and the ford in background .... hoping mine ll go big like that but prolly not as tall
Lookin nice! Both of em! applaudd
Sweet blazer!
Quote from: Gearz on January 30, 2012, 03:31:48 AM
Come a long way from 4"or 6" lift 10 bolt axles it had first time I seen it . ==band Killer job!
I remember this runnin around beaverton. It has came a long ways. Looks good!!
Thanks Guys! Yea....She Ain't What She Used To Be Lol
so whats going on with the topkick project
Quote from: Towstrap on February 13, 2012, 09:35:27 PM
so whats going on with the topkick project
Selling It....Just To Much Time/ Work/ Money For This Guy Right Now
Quote from: Boggerram87 on February 13, 2012, 10:27:08 PM
Quote from: Towstrap on February 13, 2012, 09:35:27 PM
so whats going on with the topkick project
Selling It....Just To Much Time/ Work/ Money For This Guy Right Now
how much lol??
you have gone a long way with this truck! very exciting to read through all 22 pages! awesome job Shawn! cant wait to meet up and have a few pops at tgw!
Quote from: OHEARN.2012 on February 13, 2012, 10:37:20 PM
Quote from: Boggerram87 on February 13, 2012, 10:27:08 PM
Quote from: Towstrap on February 13, 2012, 09:35:27 PM
so whats going on with the topkick project
Selling It....Just To Much Time/ Work/ Money For This Guy Right Now
how much lol??
For Now I'm Sellin It Back To The Guy I Bought It Off Of...But If It Changes I'll Let Ya Know!
Quote from: Newbie on February 14, 2012, 12:48:15 AM
you have gone a long way with this truck! very exciting to read through all 22 pages! awesome job Shawn! cant wait to meet up and have a few pops at tgw!
Thanks Man..Hell Yea I'll Have A Few To Pop loll
Quote from: Boggerram87 on February 14, 2012, 05:44:41 AM
Quote from: OHEARN.2012 on February 13, 2012, 10:37:20 PM
Quote from: Boggerram87 on February 13, 2012, 10:27:08 PM
Quote from: Towstrap on February 13, 2012, 09:35:27 PM
so whats going on with the topkick project
Selling It....Just To Much Time/ Work/ Money For This Guy Right Now
how much lol??
For Now I'm Sellin It Back To The Guy I Bought It Off Of...But If It Changes I'll Let Ya Know!
my mom would fu*@#&$ kill me if i pulled in with that one shawn
newbie i think he is selling the topkick not the k5
Quote from: bigmike on February 15, 2012, 05:08:32 PM
newbie i think he is selling the topkick not the k5
haha lmao! i will be deleting that post lol thanks mike!
Got The New Rig Home....Shes Tough! GotMud?
460 BBF, 5 Speed w/ New Clutch, 4.10 w/ Detroit Tru-Trac
Bad a$$ shawn
Quote from: Blazin40s on February 20, 2012, 10:57:22 PM
Bad a$$ shawn
Thanks Rob! Already Upgraded To New LED Tail Lights On Her...Been My DD Till Sunkist Gets A New Exhaust
How's it on go juice?
I bet! loll
you blazer is almost starting to look like my old one
(http://i192.photobucket.com/albums/z29/littleredgmc/hmmm.jpg)
==roll
Almost Done With The Rear Suspension!
haha lil red thats so funny@!!
Should Be Mobile Tonight! New Rear Suspension Will Be Done!
bad ass!
sweet
==roxx
Gotta Be To Work In A Few Hours....Will Put Pics Up On Break
GotMud? New Lift And New Plate For The Dually
Looks great Shawn!
When u doin the front?? And what if u turned around yer flip brackets and run em backwards? I bet yer shackle angle wouldn't be so bad, not that u asked for my opinion or anything lmao loll
No I Know What Your Saying, I Deffinatly Have To Fix That Angle, Gonna Start Doin The Front After The Topkick Is Gone
Welp Got The TopKick Gone (Thanks Big-Al) And The Front All Tore Down And The New Springs Mocked Up......Gonna Be A Lil Bigger Then Expected....Looks Like I'm Gonna Need A Lil More Rear Lift ++peace But Like They Say....Bigger Is Better ;D a=f loll
==cl chevvv ;D
==awesome
==kp
How are u gonna level her out?
Lookin Great!
Redid The Mock Up On The Front And Its Gonna Be Bigger Then In The Pic....Got It Sittin Level Right Now With Tractors On The Back And The Center Of The Fron Axle Is 14" Off The Ground! Gonna Take Alot More Work And Be Alot Bigger Then Expected! Gonna Have To Rebuild The Cradle To Lower The T-Case To Have A Lil Driveshaft Angles, Rebild Link Bars...The Works.....As Much As I Hate To Do It I'm Probably Gonna Just Make The Blocks Bigger On The Back And Hope For The Best..And I'm Gonna Move The Rear Hanger On The Rear Back To Fix That Nasty Shackle Angle And It Should Lift It A Lil More
Did Some Measuring And I Could Run Up To A 66" Tire Without Hittin...Though I Dont Think The Axles Would Like It To Much loll
so sweet! keep up the good work!
New Cradle...Had To Build It Lower For T-Case And Link Bar Mounts... GotMud? ..... Should Hold Up With 1/4" Wall Steel
Sweet @man!.
Man looken sweet
Thanks Guys! Working On The Other Side Of The Cradle Right Now, Should Be Done With T-Case Mounted By Tommorow
Also Got A Spare Axle Shaft And Hub For All 4 Corners Just In Case loll Thanks To 3+3 Stan!
Quote from: Boggerram87 on April 02, 2012, 03:02:51 AM
Thanks Guys! Working On The Other Side Of The Cradle Right Now, Should Be Done With T-Case Mounted By Tommorow
looking legit for sure
Fronts Done! I'm Thinking I Need A Lil More Lift In The Back To Level It Out, Thats My Mom In The 2nd Pic For Reference....Shes 5'3"
Looks like the rear axle needs to move back some? That's one monster k5. Needs a fbo sticker before tgw don't it? Lmao
tall and top heavy
More like tall and awesome! Good job shawn, can't wait to see those planets and 66s next!
Quote from: erikmud on April 06, 2012, 10:04:41 PM
tall and top heavy
Any cross car bracing to the front coming?
There is nothing wrong with tall and top heavy, that's how I like my trucks and my woman ( . )( . )
applaudd applaudd
Quote from: Flat_Black on April 06, 2012, 08:25:29 PM
Looks like the rear axle needs to move back some? That's one monster k5. Needs a fbo sticker before tgw don't it? Lmao
The Rear Has Always Been A Lil Forward, I Still Got Mine I Gotta Try And Find A Spot For!
Quote from: four_by_ken on April 06, 2012, 11:58:26 PM
Any cross car bracing to the front coming?
Yea I'm Gonna Make Some Bracing For The Frame And Build A Panhard Bar To Keep Everything In Line Side To Side!
Quote from: erikmud on April 07, 2012, 12:05:40 AM
There is nothing wrong with tall and top heavy, that's how I like my trucks and my woman ( . )( . )
Agreed! As Long As It Stays Dirty Side Down
SICK!!!!!!!!!! love it brother!
Quote from: TRENT on April 10, 2012, 02:39:23 AM
Quote from: Boggerram87 on April 07, 2012, 05:12:31 AM
Quote from: Flat_Black on April 06, 2012, 08:25:29 PM
Looks like the rear axle needs to move back some? That's one monster k5. Needs a fbo sticker before tgw don't it? Lmao
The Rear Has Always Been A Lil Forward, I Still Got Mine I Gotta Try And Find A Spot For!
Quote from: four_by_ken on April 06, 2012, 11:58:26 PM
Any cross car bracing to the front coming?
Yea I'm Gonna Make Some Bracing For The Frame And Build A Panhard Bar To Keep Everything In Line Side To Side!
Quote from: erikmud on April 07, 2012, 12:05:40 AM
There is nothing wrong with tall and top heavy, that's how I like my trucks and my woman ( . )( . )
Agreed! As Long As It Stays Dirty Side Down
at least if the dirty side goes up ya gotta cage
I Wouldnt Trust The Cage As It Is Right Now, I Gotta Make Some New Cage Mounts To Tie It Into The Frame A Lil Better.....Gonna Need Some New Floors Too..
Got The T-Case All Finished Last Night And Rest Of The Cradle Tied Up! Gonna Throw A Driveshaft In It Tommorow And Get Cranking On Jacking The Back Up So She Sits Level! ;D
Lookin good!
got a ladder so you can get in at the boggs? lol
Yea Can't Reach The Door Handle...Gonna Needa Figure That Out loll
Truck Next To It Has A 6" Lift & 33's
My Buddy Coop Says It Looks Like A "North Florida Truck"
I want to see a picture of you trying to open the door.
Haha I'll See What I Can Do Ken
I built swing down steps on my truck. Air powered lol
sweet! damn thats a big ass blazer!
chevgal chevvv ==gj Looks killer!
good job looks sweet can't wait to see it in action ++peace
Quote from: four_by_ken on April 13, 2012, 03:09:29 PM
I want to see a picture of you trying to open the door.
lol
Well The Rear Driveshaft Angle Aint Gonna Work Out So Well So I'm Goin To Pick Up A Deuce Case Tommorow, Has 3 More Inches Of Drop So It Should Fix The Problem...New Case Weighs In At 423 lbs
better rename it again as " the one and only 10k blazer" lmao so is it going to be ready for tgw?
Oh Yea It Will Be There, I'm Thinking I Wanna Run 2 Np200's After TGW But This Is Just A Quick Fix To Make Sure I'm There
Quote from: Boggerram87 on April 17, 2012, 02:39:45 AM
Oh Yea It Will Be There, I'm Thinking I Wanna Run 2 Np200's After TGW But This Is Just A Quick Fix To Make Sure I'm There
tick toc tick toc. listen to this guy who's p00 box still needs the front axle put in, trim some more off the fenders, seats, ect.... fawk i better get my ass in gear. might need to catch a ride in your rig. lol
Haha I Hear Ya Man, I Gotta Rebuild My Rear Blocks, Install New T-Case, Reuild 2 Driveshafts To Fit The Case, Build Link Bars, New Seats, Install Steering Column... And Hell My Trailer Aint Legal Yet loll
Quote from: Boggerram87 on April 17, 2012, 02:50:26 AM
Haha I Hear Ya Man, I Gotta Rebuild My Rear Blocks, Install New T-Case, Reuild 2 Driveshafts To Fit The Case, Build Link Bars, New Seats, Install Steering Column... And Hell My Trailer Aint Legal Yet loll
This is about the way it is for most of us it sounds like!! Right down to the trailer!! Lol.
i still gotta get a truck... And a trailer. ==doh
New T-Case ;D
holy boat anchor shawn.. why not just go get a loan or rab a bank and get a scs for both of us?!
More weight for the tugs!
Quote from: Blazin40s on April 17, 2012, 07:02:00 PM
holy boat anchor shawn.. why not just go get a loan or rab a bank and get a scs for both of us?!
Hey Hey Hey Rob Were Better People Then To Rob A Bank.....We'll Hit Liquor Stores loll
If u want more weight shawn then I guess I better ride with u too, and maybe we can find a couple other fat guys loll
Hmmmm.....where did I put my ski mask loll
Quote from: Boggerram87 on April 17, 2012, 09:22:25 PM
Quote from: Blazin40s on April 17, 2012, 07:02:00 PM
holy boat anchor shawn.. why not just go get a loan or rab a bank and get a scs for both of us?!
Hey Hey Hey Rob Were Better People Then To Rob A Bank.....We'll Hit Liquor Stores loll
Quote from: four_by_ken on April 17, 2012, 07:03:59 PM
More weight for the tugs!
Yea Ive Gained A Ton Of Weight Since Last Year, Its Nice That Stan (3+3) Has A Scale In His Barn, My Front Spring Mounts And Shackles Were 120lbs, My New Blocks Are 60lbs, Plus The New T-Case Is 225lbs More, Plus The Cradle Is Now ALOT More 1/4" Wall Then There Was And New Heavier Driveshafts....Shes A Heavy One & Only loll
New Pics Of The T-Case...And Mounts
New Rear Blocks a=f
Here Ya Go Ken....Me Reaching For The Door
Nice work.. looks like it might be time for a step ladder tho loll ==kp
Hehe
And with the bigger tires, the handle will be even taller.
:-)
Got Everything Buttoned Up Suspension Wise, Already Tweeked My Rear Spring Doing A Holeshot Down The Driveway..Shes Got Some Sick Weight Transfer! ==wgm Shot Some Paint On The Frame And Wheelwells To Clean It Up A Bit Too
3rd Pic Ya Can See Where The Spring Is Tweeked And Making The Truck Sit Cocked, All The New Stuff Was Painted With Tractor Paint, Link Bars Are "IH Red"
Looking sweet!!
She's ready then? How about the trailor?
Cant wait to check this out at TGW! Badass!
Do you have a hook on the rear bumper for a step ladder yet?
Last question I have...
Do you have time to put the 18.4s on and see how it feels?
HOW DID YOU BEND A LEAF WITH LINK BARS? THAT SHOULD STOP AXLE RAP IF DONE RIGHT.
I'm Finding Out About The Trailer, Nothing For A Ladder Yet But Gonna Build Something, No Time For The 18.4's, And I Did The First Test Drive Without The Link Bars In loll Thats What I Get For Jumping The Gun
ok that happens lol it just didnt make sence!
Haha Yea I Never Even Thought About That, Imma Beat The Hell Outta It At TGW And Make Sure Its Gonna Hold Up
Well Got The Truck & Trailer Wiring All Done, Only One Of My Shocks Came In From Summit....Guess The Other One Is Getting Shipped From Georgia, Got The New Harness Bolted In, Also Figured Out Why It Started Running Like Crap...Was Doing A Tune Up...Took Off The Distributor Cap And Found A Chunk Of Plastic Broke Off The Rotor And The Termanal Was All Twisted Up...Looks Like Its A Early Morning Parts Run Before Work Tommorow
Y did I not see this at TGW?
Tow rig issues.
sucks!
Yea Was On My Way Out There And The Dually Started Stalling Out On Me, Was Able To Limp It Back Home....Pretty Sure Its Just A Fuel Filter....Gonna Do It Today Or Tommorow
Dually Is Rewired With New Brake Module & Is Running Good, Gonna Load Her Up Tonight And Take It To Work For A Test Haul, Then Its Yankee Lake Bound!
Thats a fordd for ya! ==cuss
Hope she runs good down at Yankee Lake. Get some pics!!
Ran Good! ==wgm
Man that thing is awesome
Very cool!
Welp Since The Trans Blew Up At Yankee Lake I Figured I Might As Well Upgrade Everything....Got It In The Shop Pulling The Engine To Make Room For The New Drivetrain!!
well make with the pics already, jeesh.
gettin a new head rest for you and jack lmao
a=f Bye Bye Small Block
Fuel Injected 496 & Allison 545 Trans
Nice work! Is the tractor tires the same ones you had on it for Yankee?
wow looks whos getting spoiled now loll . ==kp
Quote from: Boggerram87 on August 23, 2012, 07:31:10 PM
Fuel Injected 496 & Allison 545 Trans
such an awesome early birthday gift for me! Thanks man, when can I pick it up?
Nice combo!
Quote from: Newbie on August 28, 2012, 05:55:00 PM
Nice work! Is the tractor tires the same ones you had on it for Yankee?
Yes Sir! Thats Them!
Took The Front Fender Off To Make It A Little Easier To Put The New Engine In, Just Waiting On A Few Parts And It Will Be Ready To Drop In! a=f
Bad ass broham
My Buddy Kevin Jones Is Picking Up My Trans From My Buddies Down At Indy This Weekend! Time To Get Rollin Again! I'm Probably Gonna Have To Put A Body Lift On The Truck To Get The Allison To Fit In The Trans Tunnel, Found A Write Up To Fit A New Gen Big Block In A Older Truck, I Gotta Knotch The Frame Out And Build New Engine Crossmember...Lots To Do In A Little Amount Of Time Before I Lose My Garage To Work In Lol
get it done!
When is thing gonna be back in the mud?
i still dont see any fbo stickers. lmao
Quote from: Blazin on September 14, 2012, 10:57:37 PM
When is thing gonna be back in the mud?
ASAP!!!
Quote from: Flat_Black on September 15, 2012, 01:12:09 AM
i still dont see any fbo stickers. lmao
I Gotta Find A Big Enough Spot For The One Ya Gave Me
Gettiin The Engine Tested, Gonna Take The Body Completely Off The Truck Too To Change Some Stuff Around
==wgm
Looking good!! Gonna be a totally diff monster with that engine and trans combo!!
Gonna do headers?
Probably Not, Headers For These New Engines Are A Little Pricy
Full exhaust then?
Hell No, Just Gonna Run A Small Pipe Down And Out
Body Coming Off...Ready For The 496 & Allison a=f
I'm Kinda Digging That Ride Height ^
Holy shackles batmAn
your cage doesnt tie to your frame anywhere ?
Quote from: erikmud on October 06, 2012, 03:50:34 PM
Holy shackles batmAn
I Hate Them Things!!! They Will Be Gone For Next Year!!
Quote from: the harvester on October 11, 2012, 12:22:31 AM
your cage doesnt tie to your frame anywhere ?
The Cage Was In The Truck When I Bought It And Does Tie In But Not Very Good At All, I Will Be Fabricating New Cage Mounts And Adding My 5 Points And Race Seats Before Next Year Along With Eliminating The Rear Seat!
Yeah gotta have the rear seat lol
I Just Was Gonna Take It Out Fot Saftey...If It Goes Over The Least Amount Of People In It The Better
That's good think Shawn. Plan for the worst hope for the best
Quote from: Boggerram87 on October 06, 2012, 06:54:43 AM
I'm Kinda Digging That Ride Height ^
I see a triangulated four link. Being as you already have 2 of the 4 bars. :)
Quote from: OHEARN.2012 on October 29, 2012, 02:54:32 AM
Quote from: Boggerram87 on October 06, 2012, 06:54:43 AM
I'm Kinda Digging That Ride Height ^
I see a triangulated four link. Being as you already have 2 of the 4 bars. :)
Trust Me I've Thought Quite A Bit About It loll It Might Be Happening
wow you about stripped it down to nothing!! lol
Quote from: Newbie on November 04, 2012, 08:51:36 PM
wow you about stripped it down to nothing!! lol
Thats About It...Got Kicked Outta The Shop...Lady Who Owns It Had To Put A Trans In Her Truck But Shes Done Now And I Should Be Pushing It Back In Tonight
hey if you need/want help fabbing a four link let me know....ive gotten really good at it lol
Quote from: DirtyChevy on November 10, 2012, 12:12:55 AM
hey if you need/want help fabbing a four link let me know....ive gotten really good at it lol
school me in. loll this p00 's confusing
oh come on lol its not hard. loll pm me with your questions
hows it coming along?
Alot Of Changes This Year, Engine, Trans, Suspension, Body, Lots In Store!
I'll take the old body if yer getting rid of it
I Am Getting Rid Of It Man I'll Text Ya Tommorow About It.....She Aint Gonna Be A Blazer Anymore!
Give us a hint of what its going to be man lol
How much for the motor that came out?
Quote from: Eric04 on December 26, 2012, 03:09:48 PM
How much for the motor that came out?
Old Engine Is Already Sold
Quote from: yukonjake on December 26, 2012, 06:16:40 AM
Give us a hint of what its going to be man lol
Hmmmmmmm......Its Still Gonna Be A Chevy loll
Lol
Hummm I might have to drive by needs at you got going on lol
I'm Goin Down To PA Tommorow To Pick Up The Body, I'll Get Some Pics Up When It Gets Back Here!
Awesome awesome
sounds cool
Quote from: Boggerram87 on December 31, 2012, 02:37:22 AM
I'm Goin Down To PA Tommorow To Pick Up The Body, I'll Get Some Pics Up When It Gets Back Here!
Can't wait to see what it is!! What you doing with your old k5 tail gate? I need one lol
==omg ==tka ==pics ==roxs
New Body Is A 2000 Silverado Super Short Bed
very cool!
applaudd applaudd applaudd
Very nice bud
Nice stuff !
Cool! applaudd
cool
Really Hate To Say It But I'm Parting Out The Ol Girl, Its The Hardest Thing Ive Had To Do But I Needa Use The Money To Get Out Of My Parents And Get My Own Place While The Market Is Right And Maybe Pick Up A Little Street Car To Play Around With. If Anyone Is Interested I'm Selling
2.5 Ton Rocks, Welded Rear, Brakes, Blocks Welded On, Link Bar Tabs, Rollers, New Boots And Full Hydro Set Up
2.5 Ton T- Case
New 8.1L 496 BBC & Allison Trans, Comes WIth Full Harness & Computers
16" Front Super Duty Springs & 14" Rears (3" Wide Ford Springs)
Cut 16.9-26 R1's
18.4-26 R1's
48x31x20's
Roll Cage Out Of The K5
2000 Chevy Cab & Front Fenders
My 25' Twin Axle Gooseneck, Good Tires & Brakes
Tow Rig 1988 F-350 Dually
2 Real Clean 80's Chevy Doors
If Anoyone Needs Anything Pm Me, I'll Be Putting It All Up In The For Sale Section With Prices And Pics Later Today
what color are the chevy doors
There White, The Windows Are Taken Out But There Clean, I Still Got The Glass But Scrapped The Hardware, Was Gonna Make Em Into Half Doors
What's a price on the Chevy cab? And color
Quote from: Boggerram87 on January 28, 2013, 10:14:06 PM
There White, The Windows Are Taken Out But There Clean, I Still Got The Glass But Scrapped The Hardware, Was Gonna Make Em Into Half Doors
Price for the pair?
pm sent
Price on the cab and front clip
The Doors $75 And The 2000 Cab And Front Clip $300obo, Its Beat Up
Can u text pics of the cab and front clip to 517-490-6374 thanks
I kick you in the balls.
Lol
The One & Only Will Be Living Out A New Life Through Parts Sold And I Got A New Project That Is......Well Lets Just Call It A Cut Above The Rest For Now Haha
This Is The New Project....."A Cut Above The Rest" 1968 Bolens Mower On 26" TSL's
Sweet. I got a early 60's Craftsman I would like to do that to but its still in good shape.
Lol nice
Drop a 350 in it!!!! Lol.
Boggers On It For Perkins This Weekend!
Looking good !!
Is it still 2 wheel drive?
Quote from: just one more on June 06, 2014, 02:17:10 AM
Is it still 2 wheel drive?
Yea Still 2wd, But I Got The New 4wd 4 Wheel Steer Axles Going In The New One
Little Mow Float
applaudd ==kp applaudd
applaudd applaudd applaudd
a=f ++peace