WeGotMud

Projects & Parts => Garage/Tech => Topic started by: BAD APPLE on August 02, 2011, 04:58:37 AM

Title: 2011 breakage
Post by: BAD APPLE on August 02, 2011, 04:58:37 AM
so far to date i have broken or have had issues with:

broken set of roller lifters
2 bent push rods
1 badly scratched and beaten cam
1 broken front ring and pinion
2 burnt th350 trannys
1 3500 stall torque converter
1 rear ring and pinion

how does your breakage list look?
Title: Re: 2011 breakage
Post by: OHEARN.2012 on August 02, 2011, 05:26:42 AM
GM 14 golt SF pinion bearing
sliced lower rad hose in half
totally  ==censor pass side wheel bearing
timing is way off i guess by 3 teeth
Title: Re: 2011 breakage
Post by: betterbeaters on August 02, 2011, 11:06:59 AM
couple ujoints
driveflange studs
tcase adapotr
rear end
cracked frame
and only ran it 3 times this year!
Title: Re: 2011 breakage
Post by: Blazin40s on August 02, 2011, 12:35:30 PM
Ok alex....where's the pics at??
What did u do to rearend??  And how bads the cracked frame?

Quote from: betterbeaters on August 02, 2011, 11:06:59 AM
couple ujoints
driveflange studs
tcase adapotr
rear end
cracked frame
and only ran it 3 times this year!

Title: Re: 2011 breakage
Post by: Blazin40s on August 02, 2011, 12:36:37 PM
Only breakage this year for me so far is kingpin springs and bushings. And cracked my tcase
Title: Re: 2011 breakage
Post by: betterbeaters on August 02, 2011, 12:37:08 PM
Quote from: Blazin40s on August 02, 2011, 12:35:30 PM
Ok alex....where's the pics at??
What did u do to rearend??  And how bads the cracked frame?

Quote from: betterbeaters on August 02, 2011, 11:06:59 AM
couple ujoints
driveflange studs
tcase adapotr
rear end
cracked frame
and only ran it 3 times this year!

dont like pics of broke stuff so I dont got any lol
Title: Re: 2011 breakage
Post by: Blazin40s on August 02, 2011, 02:00:14 PM
loll....good point
Title: Re: 2011 breakage
Post by: marshall on August 02, 2011, 02:46:59 PM
2 upper trailing arms
1 lower trailing arm
1 driver side axle shaft
1 driver side backing plate
1 passenger rear shock
1 alternator/battery
2 tires
(list from first 3 races)
Title: Re: 2011 breakage
Post by: ProGrade on August 02, 2011, 04:32:07 PM
radiator and lines....and I haven't had it more than 6 feet out of the garage!
Title: Re: 2011 breakage
Post by: OHEARN.2012 on August 02, 2011, 04:33:27 PM
yea mines been out twice
Title: Re: 2011 breakage
Post by: swampfoxjr on August 02, 2011, 04:49:14 PM
frame, radiator, broke engine mounting ears off block, headers, t-case, trans adapter, windshield, d70 ring and pinion
Title: Re: 2011 breakage
Post by: BAD APPLE on August 02, 2011, 06:23:31 PM
i think i figured out why my freshly rebuilt trans burnt up, the tranny cooler was completely plugged
Title: Re: 2011 breakage
Post by: betterbeaters on August 02, 2011, 08:22:46 PM
Quote from: erikmud on August 02, 2011, 06:23:31 PM
i think i figured out why my freshly rebuilt trans burnt up, the tranny cooler was completely plugged

that would do it.. bummer
Title: Re: 2011 breakage
Post by: OHEARN.2012 on August 02, 2011, 08:24:04 PM
Quote from: erikmud on August 02, 2011, 06:23:31 PM
i think i figured out why my freshly rebuilt trans burnt up, the tranny cooler was completely plugged
did u flush it before u put new trans in?
Title: Re: 2011 breakage
Post by: BAD APPLE on August 02, 2011, 08:27:36 PM
Yes, and by plugged I ment with mud its was completely covered in mud
Title: Re: 2011 breakage
Post by: betterbeaters on August 02, 2011, 08:28:51 PM
you need to find a cleaner spot for it!!! hehehe
Title: Re: 2011 breakage
Post by: BAD APPLE on August 02, 2011, 08:32:06 PM
Found just the spot for it too, I'm putting the original trans cooler along with a second cooler mounted on the rear radiator completely covered and out of the way from the mud
Title: Re: 2011 breakage
Post by: ROCK on August 02, 2011, 08:55:32 PM
th350 (lost 3rd)
exhaust hangers
front d shaft splines
voltage regulator


Title: Re: 2011 breakage
Post by: Thumper on August 02, 2011, 11:56:44 PM
Breakage on THUMPER
    one th350 so far that''s it

Breakage on FRANKENSTEIN
    2 front shafts
    1 rear shaft
         upgraded to all 1410 forged yokes
    outer chromoly 35 spline shaft
    broken shaft in th400
    broken motor mount
       (Kelly is really hard on her truck, lol)
Title: Re: 2011 breakage
Post by: MR NASTY on August 03, 2011, 11:53:26 AM
smoked the motor in the jeep-2bent rods and 4 spun rod bearings.  only thing good was the top end
Title: Re: 2011 breakage
Post by: BAD APPLE on August 24, 2011, 10:12:58 PM
add a torque converter to my list
Title: Re: 2011 breakage
Post by: Blazin40s on August 24, 2011, 10:18:33 PM
Yer kingpins went bad trent?
Did u change them yet?

Quote from: Trent on August 24, 2011, 09:43:57 PM
well so far this year on RECKLESS would have to be

broken welds in rear end, a motor, brake pads, rear shock mount, steering gear box, kingpin studs, kingpins, ujoint, body damage, rear slip yoke, rev chip

i think that about does it for this year so far, im sure there is more to come
Title: Re: 2011 breakage
Post by: 'the DON' on August 24, 2011, 11:29:36 PM
1 transmission started slipping but still worked   3 ujoints on the rear output at the t case and i have been out 15 times since t-day
Title: Re: 2011 breakage
Post by: MR NASTY on August 24, 2011, 11:52:17 PM
One motor, a couple u joints and a rear d shaft.
Title: Re: 2011 breakage
Post by: Jjay78 on August 25, 2011, 02:34:21 AM
one motor, a hand full of lockouts, a few sets of wheel berrings, a front driveshaft, several front u joints and an alternator
Title: Re: 2011 breakage
Post by: woody11769 on August 25, 2011, 02:40:37 AM
well a couple of push rods,one rear axel(plus bearings),and had my cam wear out
Title: Re: 2011 breakage
Post by: woody11769 on August 25, 2011, 02:47:51 AM
Quote from: Trent on August 24, 2011, 09:43:57 PM
well so far this year on RECKLESS would have to be

broken welds in rear end, a motor, brake pads, rear shock mount, steering gear box, kingpin studs, kingpins, ujoint, body damage, rear slip yoke, rev chip

i think that about does it for this year so far, im sure there is more to come
how do you break a rev chip??? did it fall out n you step on in ???
Title: Re: 2011 breakage
Post by: BAD APPLE on August 25, 2011, 04:08:04 AM
I don't think it broke I think it just went bad

Title: Re: 2011 breakage
Post by: RIP_K52007 on August 25, 2011, 02:01:28 PM
2 tires
2 calipers
1 front dif
1 clutch

and she will probably never let me barrow the tracker again ==roll jkk
Title: Re: 2011 breakage
Post by: marshall on August 29, 2011, 03:45:11 PM
Quote from: marshall on August 02, 2011, 02:46:59 PM
2 upper trailing arms
1 lower trailing arm
1 driver side axle shaft
1 driver side backing plate
1 passenger rear shock
1 alternator/battery
2 tires
(list from first 3 races)
also: transmission, 2 more axle shafts, 2 rear shocks
Title: Re: 2011 breakage
Post by: betterbeaters on August 29, 2011, 04:01:15 PM
1 big 355 now
Title: Re: 2011 breakage
Post by: randycrane79 on August 30, 2011, 01:30:50 AM
havnt broke anything this year yet but the somebitch aint seen mud nieghther lol
++peace
Title: Re: 2011 breakage
Post by: BIG DOG on August 30, 2011, 01:50:01 AM
changed a ujoint     rear pads  and exhaust donut/cross over flange    havent been out much this yr.
Title: Re: 2011 breakage
Post by: BIG DOG on August 30, 2011, 01:57:53 AM
yup welded it there pat did and still running it    now were pullin logs out of woods with it ( firewood)
Title: Re: 2011 breakage
Post by: BAD APPLE on October 31, 2011, 02:27:05 AM
updated my list today, added one broken seat, and took nthe rear ring and pinion out
Title: Re: 2011 breakage
Post by: ShortTemperd on October 31, 2011, 09:01:38 PM
oh boy where to start....
3 u joints in the rear 
snaped the rear axel welds
blew off front bump stop
spun a bearing
snapped two exaust hangers
snaped the front driveshaft twice if not more
messed up the cv ball in the frontdriveshaft and decided to redo everything
and im sure theirs more loll....
Title: Re: 2011 breakage
Post by: BlueChevy07 on October 31, 2011, 10:32:06 PM
Broke the rear end twice ring gear bolts first time broke carrier in half second
All axels shafts in front end
Tranny
Front drive shaft twice
Ladder bars twice
Title: Re: 2011 breakage
Post by: bigmud44 on October 31, 2011, 11:48:44 PM
bent frame 8 heim joints 4link bars 2 coilovers trans fiberglass body first pass after paint
Title: Re: 2011 breakage
Post by: Boggerram87 on November 01, 2011, 03:35:33 AM
Rear T-Case Yolk & U-Joint,  Lost A Few Inches Of Lift Outta My Rear Springs Which Trashed Out My Body A Lil But No Major Breaks This Year
Title: Re: 2011 breakage
Post by: Jjay78 on November 01, 2011, 04:26:09 PM
tosted a crank, a connecting rod, a cam, cracked the block in 2 places..and the list i already posted.. ==doh
Title: Re: 2011 breakage
Post by: Mudbuster on November 01, 2011, 08:44:05 PM
2 front leaf springs,
front driveshaft yoke (broke when springs bent/broke)

right front stubshaft.

wow I guess it was a good year since the springs just broke ==roxx
Title: Re: 2011 breakage
Post by: betterbeaters on November 01, 2011, 10:20:59 PM
everything!!!!
Title: Re: 2011 breakage
Post by: Blazin40s on November 27, 2011, 09:04:05 PM
Also broke a front driveshaft, and bent the crap outta my rear spring hangers
Title: Re: 2011 breakage
Post by: MR NASTY on November 29, 2011, 04:29:46 PM
Quote from: betterbeaters on November 01, 2011, 10:20:59 PM
everything!!!!
another toasted small block I take it?
Title: Re: 2011 breakage
Post by: ballistics-10 on November 29, 2011, 04:51:46 PM
1 starter and 1 377sbc ... Lol
Title: Re: 2011 breakage
Post by: betterbeaters on November 30, 2011, 01:35:10 AM
Quote from: MR NASTY on November 29, 2011, 04:29:46 PM
Quote from: betterbeaters on November 01, 2011, 10:20:59 PM
everything!!!!
another toasted small block I take it?

not all the way but its hurt and is growing up some more!! lol