i have a 14 bolt rear and a 10 bolt front , and this was a project truck i bought and havent been through everything yet, but while on a test run i realized my rear end doesnt have a posi , and some friends told me to weld it.. can i get your guys opinions on what to do? i am trying to save money but if its not worth welding it then ill buy a posi.. im still new to all this so i dont even know what exactly i need to do, but a few buddys of mine do.. would like to know about it before i do it.. give me ur guys info please :) GotMud? chevv gmcc chevv
Cody
yeah pull the spider gears out, fill in a couple teeth opposite of each other with weld on both gears and put em back in, did that with a 12 bolt, no problems
also the 10 bolt isnt a 1 ton its a 3/4 ton. 1 ton front is a dana 60
if its a road driven vehicle, posi unit may be your best choice, if your just gonna wheel it, weld up the spiders like Jjay 78 said.
Quote from: Orangecrush on December 14, 2011, 03:58:24 AM
if its a road driven vehicle, posi unit may be your best choice, if your just gonna wheel it, weld up the spiders like Jjay 78 said.
x2
Weld em up!
awesome! and thanks for the corrections on the front end! i will be sure to weld em ;)
If you are boggin in I wouldn't weld the front you will have a lot of problems with breakage, but you will notice a huge difference on how well it will get around with the rear welded or locked
Quote from: erikmud on December 24, 2011, 01:57:20 PM
If you are boggin in I wouldn't weld the front you will have a lot of problems with breakage, but you will notice a huge difference on how well it will get around with the rear welded or locked
X2
Quote from: betterbeaters on December 14, 2011, 12:20:44 PM
Quote from: Orangecrush on December 14, 2011, 03:58:24 AM
if its a road driven vehicle, posi unit may be your best choice, if your just gonna wheel it, weld up the spiders like Jjay 78 said.
x2
Do like they said, Would not weld the front at all !