1 ton axles

[Newbie]

i have a 14 bolt rear and a 10 bolt front , and this was a project truck i bought and havent been through everything yet, but while on a test run i realized my rear end doesnt have a posi , and some friends told me to weld it.. can i get your guys opinions on what to do? i am trying to save money but if its not worth welding it then ill buy a posi..    im still new to all this so i dont even know what exactly i need to do, but a few buddys of mine do.. would like to know about it before i do it.. give me ur guys info please



Cody

[Jjay78]

yeah pull the spider gears out, fill in a couple teeth opposite of each other with weld on both gears and put em back in, did that with a 12 bolt, no problems

[Flat_Black]

also the 10 bolt isnt a 1 ton its a 3/4 ton. 1 ton front is a dana 60

[Orangecrush]

if its a road driven vehicle, posi unit may be your best choice, if your just gonna wheel it, weld up the spiders like Jjay 78 said.

[betterbeaters]

if its a road driven vehicle, posi unit may be your best choice, if your just gonna wheel it, weld up the spiders like Jjay 78 said.

x2

[Blazin40s]

Weld em up!

[Newbie]

awesome! and thanks for the corrections on the front end!  i will be sure to weld em

[BAD APPLE]

If you are boggin in I wouldn't weld the front you will have a lot of problems with breakage, but you will notice a huge difference on how well it will get around with the rear welded or locked

[solid 12]

If you are boggin in I wouldn't weld the front you will have a lot of problems with breakage, but you will notice a huge difference on how well it will get around with the rear welded or locked

X2

[D60KING]

if its a road driven vehicle, posi unit may be your best choice, if your just gonna wheel it, weld up the spiders like Jjay 78 said.

x2

Do like they said,  Would not weld the front at all !