is there a passenger side drop case that will bolt to a 4l60E?
looking at a SAS swap on my 95 chev and want to use a chevy dana 60
Any that bolted on to a 700R4 will bolt to the 4L60E. NP 208's and 241's
use a 241 so the speedo work..
Ps drop NP241, from 90-91 blazers amd burbans. To tell the difference, the 241 has a 2 piece tail housing, 208 is 1 piece.
Why not go ford d60? Then it'll be high pinion too!
Quote from: J.C. on January 14, 2012, 08:57:16 PM
Ps drop NP241, from 90-91 blazers amd burbans. To tell the difference, the 241 has a 2 piece tail housing, 208 is 1 piece.
Electronic speedometer too.
It has to be the 241 with the electric speedo because the trans will not work properly with out the speedo hooked up..been there, done it..
Quote from: Blazin40s on January 15, 2012, 12:51:02 AM
Why not go ford d60? Then it'll be high pinion too!
probably will
It would prob be easier, cause then u can run stock tcase and everything will work right.
Quote from: damn_ford on January 15, 2012, 04:08:48 PM
Quote from: Blazin40s on January 15, 2012, 12:51:02 AM
Why not go ford d60? Then it'll be high pinion too!
probably will