passenger drop t case for 4l60E?

[damn_ford]

is there a passenger side drop case that will bolt to a 4l60E?

looking at a SAS swap on my 95 chev and want to use a chevy dana 60

[Chevy Racer]

Any that bolted on to a 700R4 will bolt to the 4L60E.  NP 208's and 241's

[betterbeaters]

use a 241 so the speedo work..

[J.C.]

Ps drop NP241, from 90-91 blazers amd burbans. To tell the difference, the 241 has a 2 piece tail housing, 208 is 1 piece.

[Blazin40s]

Why not go ford d60?  Then it'll be high pinion too!

[ToughBowtieTruck]

Ps drop NP241, from 90-91 blazers amd burbans. To tell the difference, the 241 has a 2 piece tail housing, 208 is 1 piece.

Electronic speedometer too.

[solid 12]

It has to be the 241 with the electric speedo because the trans will not work properly with out the speedo hooked up..been there, done it..

[damn_ford]

Why not go ford d60?  Then it'll be high pinion too!

probably will

[Blazin40s]

It would prob be easier, cause then u can run stock tcase and everything will work right.

Why not go ford d60?  Then it'll be high pinion too!

probably will