I have a 1973 Chevy 1 ton short box. It has a 10" suspension lift, dana 60 front open,14 bolt full floater rear with a detroit locker and 4:56 gears. For now it has a 413 sb, 400 tranny with 3000 stall converter, and a divorced 205 tcase. The gas tank's already in back and radiator's going back there also. It has a fiberglass tilt front clip also and i run 38.5 tsl super swampers. It's currently getting put together in the garage, can't wait for spring!
sounds sweet!
here's a pic
very cool shorty
nice!
Very cool!
Poor Poor Bad Obsession... Hope you treat her well!
thanks guys! always wanted a shortbox and i can't wait to take it out for the first time and beat on it!
nice rig
Quote from: HockeyGuy on January 17, 2012, 03:34:06 PM
nice rig
thanks, i got beer and pretzels out to the garage i go.thinkin about tearing the dash out and gutting it. I'm gonna have just a oh p00 handle on the passenger side and gauges in front of me. might even see about moving the steering and brake booster away from frame about 3". no room to even take my sb valve covers off let alone when my bb gets back in the saddle.
well only managed to get my steering box hooked back up then i had to check out some boggers. tomorow i mght have 2 new boggers and zoomie big block headers for it! now the bigblock's gotta get rebuilt sooner!
Rubber shovels yeah!
nice tires!!
Quote from: betterbeaters on January 19, 2012, 12:57:43 AM
nice tires!!
thanks, i had to only $400 new with 1 brand new rim need other rim but that's a steal!
haven't done much lately but i did get a newer lighter brake booster, and the right flywheel for the 413 and got a new shock to replace the one i bent at the end of last year. Only actual work i did was gutted the dash completely,but i still gotta cut some of the frame of the dash out. then it'll be only steering wheel and brakes
Nice lookin truck!
Quote from: Bowtie972 on January 25, 2012, 01:19:13 AM
Nice lookin truck!
thanks
Update- dash frame is cut out, tranny is bolted back up. next is finding the home for the divorced 205 and modifying driveshafts from the longbox. I made a to do list and i gotta get going on the old beast. I am working on getting my 350 rebuilt at the machine shop that should be sweet it's gonna be a 500 horse running on premium gas. Hopefully it gets done this summer but damn hp aint cheap! just the bottom end is 3000 and the tops gonna be another 2000 so don't know whether it'll be done this year or not. heres the list of to do's.
new brake lines and fuel lines
getting a steering stabilizer hooked up for the crossover steering
box in the motor
get radiator mounted in the back and run the piping
make bumpers front and back
maybe exhaust
dana 60 needs seals,lower balljoints,and the new lockouts installed
redo any bad sheet metal,get a good sprayer setup for the windshield wiper
Also gotta make a spare tire mount
i also gotta get lights mounted up and front end of tilt front clip needs diamond plate covering it
still gotta make new dash with just gauges and oh p00 bar on passenger side
id like to make a roll bar in the back and build a roll cage in the cab
possibly paint it
change the govenor in tranny so it dont shift at 5000 rpm
shave the 14bolt and possibly disc brake conversion
and put my marine alternator on it
also the msd needs hooked up along with tach and high torque starter.
Damn and springs almost here! time to get moving!
got a crossmember in and mounted for the 400 turbo today. next is mounting divorced 205 tcase and modifying the driveshafts.
started assembling my small block today at Renew Performance machine shop. looking good!
here is a few pics of the mount i made for the tcase. on my longbox it bolted right to the crossmember that the back cab mounts sit on. on my shortbox it didnt have a crossmember across for the back cab mounts they were individual so i just connected em with 3" angle iron then a plate is gonna be bolted to the bottom of the angle iron. i wouldn't need the plate but im moving the tcase forward a few more inches to keep a good rear driveshaft angle.
heres a few sb goodies i got today! now i can finish it yeah!
sweet parts erics a cool guy!
Quote from: betterbeaters on February 26, 2012, 11:23:03 PM
sweet parts erics a cool guy!
Yes he is! he's hooked me up with a free brake booster and gave me a good deal on the sb goodies for sure!
this thing gonna be up and running for this season??? id love to see this thing run again!
Quote from: Kyle on February 27, 2012, 12:14:09 AM
this thing gonna be up and running for this season??? id love to see this thing run again!
Oh yeah! hopefully it will be doing a burnout in the next week or two and hopefully bogging somewhere at the end of march or begining of april.
Take it to schuss mountain hill climb
Quote from: fuzzy on February 27, 2012, 01:23:05 AM
Take it to schuss mountain hill climb
i'd like too! but can't this motor killed my $$$
It's gonna be fun though! hopefully
yea engines will take all the $$$ away..lol
Sweet build keep us posted
Quote from: puddlejumper on February 29, 2012, 06:01:25 PM
Sweet build keep us posted
Thanks, will do
Quote from: bigmike on February 29, 2012, 05:26:37 PM
yea engines will take all the $$$ away..lol
The bad part is im a big block guy! what started out as dropping off the forged crank to get checked cause it'd been sitting for almost 10 years turned out doing the whole damn motor. If i would have spent this kinda money on my 454 or 402bb id be way better off. oh well if the sb don't cut it in the bogger ill put it in my 78 z28 camaro!
well if ya dont like it feel free to give it to me ;) id take it off your hands
This rigs pretty sweet!
Quote from: Kyle on March 01, 2012, 11:57:45 AM
well if ya dont like it feel free to give it to me ;) id take it off your hands
lol! im sure you would but ill get my $ worth of fun out of it eventually. may take 10 years but i will!
Quote from: 989F150904 on March 01, 2012, 01:50:48 PM
This rigs pretty sweet!
thanks
from the way it all looks it should do ya well! may not make big block power, but its way less weight. itll move that truck around no problem
Quote from: Kyle on March 02, 2012, 12:06:13 PM
from the way it all looks it should do ya well! may not make big block power, but its way less weight. itll move that truck around no problem
yeah im hoping for at least 450hp on premium or i might run alcohol and who knows how much hp she'll have with a 100 shot of nos! gonna wait and see how it does before i get the nos kit though. I'd rather not violate the ol 360 but if them boggers don't spin fast enough it has no choice! The intake is getting drilled and tapped for the nos bosses regardless :)
Quote from: Bryank on March 02, 2012, 09:23:32 PM
Quote from: Kyle on March 02, 2012, 12:06:13 PM
from the way it all looks it should do ya well! may not make big block power, but its way less weight. itll move that truck around no problem
yeah im hoping for at least 450hp on premium or i might run alcohol and who knows how much hp she'll have with a 100 shot of nos! gonna wait and see how it does before i get the nos kit though. I'd rather not violate the ol 360 but if them boggers don't spin fast enough it has no choice! The intake is getting drilled and tapped for the nos bosses regardless :)
just hook up a nitrous system for show! make it seem like its even more cooler than it already is! ive been tempted to buy a couple of empty bottles to strap in the bed of the truck lol
bottom end almost done. now if only i could get work done on the truck itself!
finally tcase mounted just gotta shorten rear driveshaft tomorow and strap the driveshafts in
i def like the bowtie on the side there! sweet idea!
==cl
NICE!!!
Quote from: pit on March 06, 2012, 01:40:58 AM
NICE!!!
Quote from: ProGrade on March 05, 2012, 10:52:46 PM
==cl
Quote from: Kyle on March 05, 2012, 08:23:33 PM
i def like the bowtie on the side there! sweet idea!
Thanks, shortened rear driveshaft 13", welded up, dropped on toe! hopefully bolting the driveshafts up tomorow.
==kp, nice project !!
Quote from: Jjay78 on March 06, 2012, 04:06:01 AM
==kp, nice project !!
thanks. made little progress today more tomorrow.
slowly getting closer, got bumper bolted on today and radiator almost done mounting in back. had the swampers meet eachother lol.
couldnt afford the right intake so ported this one out for now.
oh yeah! had to do a test fit, hopefully running this weekend.
going to be sweet when finished
Quote from: 355REDNECK on April 06, 2012, 02:47:23 AM
going to be sweet when finished
thanks! i hope so
It's alive again! sounds awesome got alot done this weekend! gonna be throwin mud soon!
H E L L Y E A
motors almost done! gotta sell or blow up the 413 first though or put in my camaro.
backed the beast out of the garage and did a little burnout with her. gauges mounted and msd. wiring is almost done too. last big project is building boxed in front end around motor and shell be ready for a beating.
getting there slowly but surely!
looking good your from greenville? if so you have to come out to pringle mud run july 4th in sand lake.
Quote from: chromey on April 28, 2012, 11:33:08 AM
looking good your from greenville? if so you have to come out to pringle mud run july 4th in sand lake.
heck ya i'll shoot for it man. sold the 413 this morning so 450hp race motor going in the next couple days! man am i pumped to take this thing out and beat it! hole new truck rebuilt from axles up with a brand new badass small block and new boggers damn its gonna be fun!
hell ya man its a badass looking truck and same can't wait to get out there!
Thats one stout lookin truck! Should tear it up good! GotMud? GotMud?
Quote from: Bowtie972 on April 29, 2012, 02:58:46 PM
Thats one stout lookin truck! Should tear it up good! GotMud? GotMud?
Quote from: chromey on April 29, 2012, 03:46:07 AM
hell ya man its a badass looking truck and same can't wait to get out there!
thanks, it will be out this weekend hopefully for a test run!
how did it do? any pics?
got it out new motor rips had a few electrical issues but no breakage!
==kp. Lookin good!
Quote from: Bowtie972 on May 08, 2012, 03:50:04 AM
==kp. Lookin good!
Thanks! there's a couple videos on facebook. i need to modify my boxed in front end a bit and put my body lift in and ill be able to put the tilt front end back on.But im liking the boxed in front end more and more looks mean espically when i add a big bowtie to it and maybe something on the sides.
looks good sounded nice in them vids!
Quote from: betterbeaters on May 08, 2012, 09:07:03 PM
looks good sounded nice in them vids!
thanks, it will run really good once i get to time it in and adjust the carb. i also gotta put the bigger electric fuel pump in so the demon stays happy not to mention the electrical and get throttle cable adjusted so i can get full throttle. its gonna be real fun when i take the 6000rpm chip out and put the 7000 in! I basically got it to run and took it out and beat on it lol
few pics
headed to lakeview bog at roughroads tomorow! oh yeah!
tore it up no breaks!
haven't done much too it just put on some better electric fans and added some exhaust. just gonna add some more water proofing and take it out to Orleans mud bog sunday the 3rd and put a beating on it!
ran kinda crappy blew a tire and new thermostat junk already but overall fun beating
Quote from: TRENT on June 04, 2012, 02:34:28 AM
Was ya runnin low tire pressure?
Get rid of the thermostate. Problem solved for good.
i think that front left tire was low on pressure should have checked, yeah thermostat coming out i might gut one out for a restrictor? heard that works good.
took the thermostat out today and wow what a difference! thermostat didnt even seem stuck but whatever i wish i wuld have not had it in from the start. it took about 20 minutes of running it and reving it up just to get temp to 180 then after i turned the fans on the temp went to 140 and was dropping! then i took the fuel regulator off and the gauge quit working.... think it was to much lol so gonna put the holley regulator on and take it to orleans raceway tomorow and see how it does.
Ready to tear it up at Evart tomorow! hopefully things go good!
no breaks but still didn't run right. still had a blast! it rips only running half ass lol can't wait till she runs perfect.
Few pics
well this beater is under reconstruction a bit. after dealing with it running half ass 5 or 6 bogs it's down till it all gets sorted out. then gonna get rid of them 1973 body mounts! and add about 2" body lift and beef up the cab mounts too. then tilt clip will be able to go back on. also gotta redo boxed in front end to be more water proof and away from slicing my tires ocasionally! and last the goofy hulk is coming off and it might get a cheap paint job! gonna miss calling it the hulk though gotta come up with new name ???
Nice truck, you should just paint her green and keep the name the hulk
Quote from: yukonjake on July 31, 2012, 04:28:23 AM
Nice truck, you should just paint her green and keep the name the hulk
good idea! thanks
well havent fixed the old beater up too much, just rattle canned it black no more hulk. i did add some bigger tube headers, msd pro billet distributor, and a new fuel pump,regulator and fuel pressure gauge. gonna take it to rough roads in lakeview on saturday to see what it's got.
had a blast sat at roughroads the beater ran good.
looks good
Quote from: scottsdale on August 27, 2012, 09:42:59 AM
looks good
thanks unfortunately its done for the year. tranny is spanked i think and valve breather came off and motor got some mud in it so its coming out. gonna put together my 402 big block first and have some work done to my spare 400 turbo before it goes in. i got plenty of winter upgrades to do thats for sure.
well been a while, the motor turned out fine so far had very little mud in it and none came out when i changed the oil. still gotta put the other tranny in it. gonna cut my boggers at some point. picked up these tractors today for cheap. they measure 44" tall. gonna need more lift and gotta weld in some centers soon. think i need a tire storage center now 10 fricken tires now. looking forward to spring! not all the work i gotta do though.
need a couple more dually rings and tires will be done. then after christmas gonna start working on it again. don't know if it ll fit out of the garage after body lift, thinking of using bare rims to pull it out.
looks badass
Lookin pretty good man keep it up
lookin good, cool project
thanks guys! finally finshed the tractors and thew em on today for a little test and damn they dig! gonna be badass this spring!
nice them should be fun!
poor axles lol look good!
Quote from: Bryank on October 20, 2012, 11:52:04 PM
well been a while, the motor turned out fine so far had very little mud in it and none came out when i changed the oil. still gotta put the other tranny in it. gonna cut my boggers at some point. picked up these tractors today for cheap. they measure 44" tall. gonna need more lift and gotta weld in some centers soon. think i need a tire storage center now 10 fricken tires now. looking forward to spring! not all the work i gotta do though.
What is the actual spec for those tires? Wanna find some like that!!
Quote from: CBakes on December 22, 2012, 02:21:07 AM
Quote from: Bryank on October 20, 2012, 11:52:04 PM
well been a while, the motor turned out fine so far had very little mud in it and none came out when i changed the oil. still gotta put the other tranny in it. gonna cut my boggers at some point. picked up these tractors today for cheap. they measure 44" tall. gonna need more lift and gotta weld in some centers soon. think i need a tire storage center now 10 fricken tires now. looking forward to spring! not all the work i gotta do though.
What is the actual spec for those tires? Wanna find some like that!!
they are 10.00 x 22. they come off irrigation system. they measure 44-1/2" tall installed on truck with almost 2" paddles :)
Quote from: Bryank on December 22, 2012, 02:50:28 AM
Quote from: CBakes on December 22, 2012, 02:21:07 AM
Quote from: Bryank on October 20, 2012, 11:52:04 PM
well been a while, the motor turned out fine so far had very little mud in it and none came out when i changed the oil. still gotta put the other tranny in it. gonna cut my boggers at some point. picked up these tractors today for cheap. they measure 44" tall. gonna need more lift and gotta weld in some centers soon. think i need a tire storage center now 10 fricken tires now. looking forward to spring! not all the work i gotta do though.
What is the actual spec for those tires? Wanna find some like that!!
they are 10.00 x 22. they come off irrigation system. they measure 44-1/2" tall installed on truck with almost 2" paddles :)
Thanks for the info...the search begins! They look good!
Quote from: CBakes on December 22, 2012, 02:51:48 AM
Quote from: Bryank on December 22, 2012, 02:50:28 AM
Quote from: CBakes on December 22, 2012, 02:21:07 AM
Quote from: Bryank on October 20, 2012, 11:52:04 PM
well been a while, the motor turned out fine so far had very little mud in it and none came out when i changed the oil. still gotta put the other tranny in it. gonna cut my boggers at some point. picked up these tractors today for cheap. they measure 44" tall. gonna need more lift and gotta weld in some centers soon. think i need a tire storage center now 10 fricken tires now. looking forward to spring! not all the work i gotta do though.
What is the actual spec for those tires? Wanna find some like that!!
they are 10.00 x 22. they come off irrigation system. they measure 44-1/2" tall installed on truck with almost 2" paddles :)
Thanks for the info...the search begins! They look good!
thanks they work good too! can't wait for spring!
That thing looks nasty. Very cool project!
i hate looking through all the projects, it just makes me wish i had the time to finish mine. slick truck tho
Quote from: Jthomas on December 23, 2012, 10:28:21 PM
i hate looking through all the projects, it just makes me wish i had the time to finish mine. slick truck tho
i here ya there man, you will get r done, just take your time and do it right the first time! im always getting to pumped to go beat on this beater and end up reworking it all the time but hey its all part of the game when your not rich and just love getting out to play ;D
been working on it a bit, got most of the body lift on it today. took the drum and plate of one side and a few other odds n ends done.
got both drums removed and big blocks is at the machine shop. like losing the drums thinkin of whether i should build a collar around the hubs to keep some mud out but ??? Definately got some more ground clearance, gonna cut as much off the ff14bolt as i can too to gain even more.
few pics. 400 isn't gonna shift itself any more!
looking good! keep up the good work brother!
getting some done on this beater. its got about 4" more lift to clear the tractors. cut the boggers. rebuilding the big block. adding a shift kit to tranny. got a rollcage to install. putting bucket seats in it out of an 89. rewiring all with the new switch panel. building new boxed in front end. Still need hydro steering.
Wow very cool, you've been busy lol going to look good
Right on!
busy busy will be cool when done tho all worth it
Quote from: highbrid on March 24, 2013, 11:57:14 PM
Wow very cool, you've been busy lol going to look good
Quote from: Newbie on March 25, 2013, 10:20:42 AM
Right on!
Quote from: poorboyzmuddin on March 26, 2013, 02:23:25 PM
busy busy will be cool when done tho all worth it
thanks guys, actually been lazy lol id be done by now if i was busy! hopefully in the next month or so it's done i can't wait to beat the snot out of it!
finally got motor and tranny done and installed.
Looks awesome
are those boggers 15/38/15? and how did u cut them? nice and clean cut
Quote from: highbrid on May 12, 2013, 01:54:44 PM
Looks awesome
thanks
Quote from: moparmudman on May 17, 2013, 01:29:22 PM
are those boggers 15/38/15? and how did u cut them? nice and clean cut
yes i used a tread doctor. it's for cutting dirt bike tires but it worked pretty good. just very time consuming and stinky. probably got 4hrs just in them 2 tires.
finally got time to work on it and got motor running. sounds great.
lookin good
is it done yet ?
Quote from: ddmachine on June 06, 2013, 04:53:52 PM
is it done yet ?
nope got radiator hoses hooked up that's about it lol. the rate im going maybe next year!
few more things to do and she'll be done. got to drive it out the garage at least and see what it looked like with the 4" body lift. gonna be sweet with the 45" tractors.
very nice
Quote from: highbrid on June 29, 2013, 05:32:17 AM
very nice
thanks man. turning out good. if only i had more money!
almost done few little things to do and shes making it out finally sep 1 at orleans raceway. cant wait to beat the crap outta this thing, waited way to long and done alot to it.
What size are those tractor tires
Looking good
GotMud?
What's on the sidewall are tgey 12.4-24
Quote from: BAD APPLE on August 09, 2013, 09:56:24 PM
What's on the sidewall are tgey 12.4-24
almost walked outside with a flashlight then remembered i awnsered this before couple pages back lol. they are 10.00 x 22 off them irrigation systems. only the newer ones look bigger and wider!
Quote from: jcrandell420 on August 09, 2013, 08:20:44 PM
GotMud?
holy crap you are finally on here josh! sweet you should start a topic of your chevy it's getting pretty badass!
Next Sunday finally gonna beat on this beater!
it's ready to get it's ass whooped! tomorow at Orleans!
Nice looks good
beater did good.
truck did good at Frahms yesterday. things are working good only minor stuff has happened. Next week is stewarts mud bogg. Then maybe one more at my buddy joe's house and i'll call it a year. Still haven't tryed the tractors, really don't need em ;)
gonna see if the bud wogger likes it's tractors tomorow
Where is the bog at?
Quote from: highbrid on September 22, 2013, 01:46:52 AM
Where is the bog at?
it's at Stewarts mud bog South stevenson rd crystal/stanton area
Hmm might have to try to get over there why didn't ya go to the one in white cloud at allers farm?
Quote from: highbrid on September 22, 2013, 02:43:25 AM
Hmm might have to try to get over there why didn't ya go to the one in white cloud at allers farm?
would have like too but not enough $$$. my dually gets 5mpg!
tractor tires worked great but motor lost oil pressure. sucks time for rebuild again :( 3 bogs n done
Understandable sucks about your motor hopefully ya didn't hurt anything
that sucks bad pump mabye? hope its a easy fix.
it's just a real bummer. last time i rebuilt this thing it lasted 7 years. i thought it'd last longer this time! p00 i put in a forged crank arp main bolts and it plastigauged perfect. it's starting hard and can hear it squeak mains are f'd. just sucks ass at least $500 to fix her up again. if i can sell my motorcycle for $500 or trade it for a nice 350 ill put the racing small block in it but we will see.
good luck
Sounds like ur havin the same bad luck i am!
started it a few minutes ago and it had 60psi oil pressure and sounded good? i only let it run a minute though im pretty sure its still f'd. the oil pressure hasn't been good since the start. it primed good 70psi. but after starting and running it it usually 60psi idle cold and rev up to maybe 75 and warm 20-30 idle and 50 rev up. nothing like first time i built it. it would idle 70 cold and rev up to 100 and 50-60idle and still almost 80 rev warm.you wouldn't think a forged crank would make that much of a difference? i know they do expand a little when hot but nope something else went wrong. only thing i could think of was when i went to bolt up the torque converter it didn't sit against the flywheel easy. i had to tighten the bolts to get it snug against the flywheel. not sure on that though? just remember back in the day my friend had that problem. his mains got f'd up because the torque converter was pulling on the crank.
Mine had the same symptoms before i finally lost all idle pressure. Mine was cuz the rear main cap never had the oil pump torqued to it when it was line honed. Once that bearing went so did the rest. Dont take long. I doubt ur crank had anything to do with it
Mine holds 70 when first stated but one I run it a few times it drops to 30-35 at idle been like that for three years
rule of thumb, 10 lbs per 1000 rpms, but not necisarily 10 lbs at 1000 rpm idle, if you are running 6000 rpms you should see roughly 60-70 psi etc....25-35 psi is ok at idle (warm/hot), my engine cold 65 psi at idle, when it warms up, 25-35, both of the engines that i have ran in the last 6 years had/have the same charictoristics with zero problems,
just sayin :)
well gonna tear it apart over winter to see what's up. gonna pick up a decent 350 for my dually hopefully tonight or tomorow and put the racing small block back in it for now. I gotta go wheeling one more time before the years out! i was having to much fun!
Last year at trucks gone wild I had a pressure drop about 20 at idle and it ended up being the oil pick up.
Quote from: MudSlayer on September 28, 2013, 02:40:14 PM
Last year at trucks gone wild I had a pressure drop about 20 at idle and it ended up being the oil pick up.
hmm. it was clean and i made sure to weld this one on so don't think it's that. im pretty sure that torque converter wiped out the thrust bearing and is letting the crank walk around. but on a good note traded my motorcycle for this rebuilt odly colored 357! it runs great and should work perfect in the dually. bogger is getting the sbc back for now. it should rip this time around!
ready to go! hope it runs good!
Quote from: Bryank on September 28, 2013, 10:55:44 PM
Quote from: MudSlayer on September 28, 2013, 02:40:14 PM
Last year at trucks gone wild I had a pressure drop about 20 at idle and it ended up being the oil pick up.
hmm. it was clean and i made sure to weld this one on so don't think it's that. im pretty sure that torque converter wiped out the thrust bearing and is letting the crank walk around. but on a good note traded my motorcycle for this rebuilt odly colored 357! it runs great and should work perfect in the dually. bogger is getting the sbc back for now. it should rip this time around!
I'm willing to bet that motor was built by Jim Stewart. He painted all the motors he built purple.
Quote from: marshall on November 03, 2013, 08:57:04 PM
Quote from: Bryank on September 28, 2013, 10:55:44 PM
Quote from: MudSlayer on September 28, 2013, 02:40:14 PM
Last year at trucks gone wild I had a pressure drop about 20 at idle and it ended up being the oil pick up.
hmm. it was clean and i made sure to weld this one on so don't think it's that. im pretty sure that torque converter wiped out the thrust bearing and is letting the crank walk around. but on a good note traded my motorcycle for this rebuilt odly colored 357! it runs great and should work perfect in the dually. bogger is getting the sbc back for now. it should rip this time around!
I'm willing to bet that motor was built by Jim Stewart. He painted all the motors he built purple.
lol it was built by Charles Brisco. He is the motor guro of hastings! lol. he had like 20 high performance motors in a 1 stahl garage i couldnt believe it. he claims it was the only paint he had laying around. but hey it does run great and the bogger is a ripper now with the small block back in it. plans for next year is to shed some weight. joining the s10 bogger crowd. throwing this beater on it. might have to change the name to the red rocket lol
That's funny, Jim painted his purple because he said nobody else would. Haha
Haven't done anything to it except for firing it up every once in a while.if I can sell the BBC I'm gonna buy a twin turbo kit for it. Just waiting for spring she is pretty much ready to go.
Quote from: Bryank on January 21, 2014, 11:55:06 PM
Haven't done anything to it except for firing it up every once in a while.if I can sell the BBC I'm gonna buy a twin turbo kit for it. Just waiting for spring she is pretty much ready to go.
wanna buy me one for mine to lol
I just wanna go bogging! Freshening up the Dana 60 and serpentine setup is on the list. Truck is gonna be ready this spring for that oh so great mud!!!!!!!
X2 on that
Axle rebuilt and uprights added.
looking good bryan youll like those uprights which size did you put on?
Thanks they are 1-3/4 to 3-1/2.added these today
Thats what i put on the jeep they sound great nice deep tone
did you add those screens on top havent saw them like that before i like. might have to do that myself
Yeah I just grabbed some stainless screen from work and cut and tacked em in. Got extra at the house if ya want some
ill take ya up on that looks way better than tractor flaps
thanks
Took it out to Stewart's mud bog and it ran good but need to upgrade the only yoke on the 205 I haven't yet and she'll be back at it.
Sweet pic
Quote from: cjbogger on March 26, 2014, 12:03:05 AM
Thats what i put on the jeep they sound great nice deep tone
did you add those screens on top havent saw them like that before i like. might have to do that myself
I like the screens
Got 2 New Boggers For The Front. Just Pizz Cutters,But Both Will Be cut For Stewarts On Sat. New1350Joints and Yokes Should help
Been out tearing it up. Found out my gas pedal mechanism has been fudged up the last 2 bogs and only had half throttle but no big deal.
Just a few pics from a couple weeks ago at Orleans and bliss rd
what are the damages to it from the king of the pit
Box is falling apart lol and yoke on case loose and sheared the pins holding the front springs together jumping it.
Quote from: Bryank on September 13, 2014, 12:59:05 PM
Box is falling apart lol and yoke on case loose and sheared the pins holding the front springs together jumping it.
time to 4 link and gut the box
Quote from: 355REDNECK on September 14, 2014, 01:30:22 AM
Quote from: Bryank on September 13, 2014, 12:59:05 PM
Box is falling apart lol and yoke on case loose and sheared the pins holding the front springs together jumping it.
time to 4 link and gut the box
;D definitely want to.
Quote from: Bryank on September 14, 2014, 02:42:54 AM
Quote from: 355REDNECK on September 14, 2014, 01:30:22 AM
Quote from: Bryank on September 13, 2014, 12:59:05 PM
Box is falling apart lol and yoke on case loose and sheared the pins holding the front springs together jumping it.
time to 4 link and gut the box
;D definitely want to.
mine needs a new floor and frame tires tranny
Damn well good winter project. Have her ready for spring.
Quote from: Bryank on September 15, 2014, 04:26:10 PM
Damn well good winter project. Have her ready for spring.
well see how bad it is
We have your tranny and t-case for sale right in Belding. 8) 350/205
Quote from: MudSlayer on October 16, 2014, 01:45:41 PM
We have your tranny and t-case for sale right in Belding. 8) 350/205
[/quote I'll stick with the 400/205 :)
Little 84rh street fun and new sticker
Ended the year good. Ecs bog was sweet.Can't wait for next year.
Another sweet pic from farr's photography
Few new pics. Still going strong 5:13 gears now