toogle switches

[redneck ohearn]

ok i tore all the old wireing harness out of my bogger and im goin to start rewirng the wires that i need to start it and run this is my first truck to rewire. i got a moroso toggle switch panal off of summit and i dont know where the ignation wire go??? and where do all the wires go from the altnator?? i got the starter wire just need those other 2 things and my bogger will be running!!!  

[ProGrade]

When I did mine I googled wiring diagram for 87 chevy tbi (you put in your truck) and I found the gm service manual wiring diagrams, made it easy. 

[betterbeaters]

use relays for everything or you could have a fire!

[bigmud44]

use relays for everything or you could have a fire!

seen several trucks burn to ground not having fuse s or relays @ very least put master kill switch

[marshall]

you are running a tbi motor? not sure on that, buf if its carbuerated you can come look at my race car. make a diagram of what i run, a master power switch, a toggle for the dist, and a push button start. up to you

[J.C.]

ignition i believe would go from the battery, to the switch, to the +bat on the distributor, if its hei. if its not hei, then i dunno

[betterbeaters]

ignition i believe would go from the battery, to the switch, to the +bat on the distributor, if its hei. if its not hei, then i dunno

MAKE SURE YOU GOT A RELAY OR FUSE IN LINE SO YOU DONT HAVE A FIRE  BUT THAT IS HOW A HEI HOOKS UP!

[85cHeavyMetalBogger]

you are running a tbi motor? not sure on that, buf if its carbuerated you can come look at my race car. make a diagram of what i run, a master power switch, a toggle for the dist, and a push button start. up to you

i might take u up on that offer, i need to rewire my bogger and that sound pretty basic.. i got alot of wires all over right now..

[marshall]

you are running a tbi motor? not sure on that, buf if its carbuerated you can come look at my race car. make a diagram of what i run, a master power switch, a toggle for the dist, and a push button start. up to you

i might take u up on that offer, i need to rewire my bogger and that sound pretty basic.. i got alot of wires all over right now..

offer is open to whoever

[85cHeavyMetalBogger]

will let u knw

[redneck ohearn]

use relays for everything or you could have a fire!

seen several trucks burn to ground not having fuse s or relays @ very least put master kill switch

i pretty much have the same setup as that explor we got from you, the moroso toggle switch panal has fuse for it 

[redneck ohearn]

ignition i believe would go from the battery, to the switch, to the +bat on the distributor, if its hei. if its not hei, then i dunno

MAKE SURE YOU GOT A RELAY OR FUSE IN LINE SO YOU DONT HAVE A FIRE  BUT THAT IS HOW A HEI HOOKS UP!

I GOT FUSES LOL THANKS FOR THE INFO

[redneck ohearn]

you are running a tbi motor? not sure on that, buf if its carbuerated you can come look at my race car. make a diagram of what i run, a master power switch, a toggle for the dist, and a push button start. up to you

its carb, so i run one wire to dist, and the other to the master power switch and if i still cant figure it out ill take you up on that offer but it would have to be a sunday since i work 6 12 shafts days

[marshall]

you are running a tbi motor? not sure on that, buf if its carbuerated you can come look at my race car. make a diagram of what i run, a master power switch, a toggle for the dist, and a push button start. up to you

its carb, so i run one wire to dist, and the other to the master power switch and if i still cant figure it out ill take you up on that offer but it would have to be a sunday since i work 6 12 shafts days

i also run a one-wire alternator, double j can make yours the same way pretty cheap. less wires is better.

[redneck ohearn]

you are running a tbi motor? not sure on that, buf if its carbuerated you can come look at my race car. make a diagram of what i run, a master power switch, a toggle for the dist, and a push button start. up to you

its carb, so i run one wire to dist, and the other to the master power switch and if i still cant figure it out ill take you up on that offer but it would have to be a sunday since i work 6 12 shafts days

i also run a one-wire alternator, double j can make yours the same way pretty cheap. less wires is better.

how much would it cost??

[marshall]

you are running a tbi motor? not sure on that, buf if its carbuerated you can come look at my race car. make a diagram of what i run, a master power switch, a toggle for the dist, and a push button start. up to you

its carb, so i run one wire to dist, and the other to the master power switch and if i still cant figure it out ill take you up on that offer but it would have to be a sunday since i work 6 12 shafts days

i also run a one-wire alternator, double j can make yours the same way pretty cheap. less wires is better.

how much would it cost??

20 ish, if your alternator is good. prolly 40 ish for complete rebuild, not sure what everyone else has to pay, lol. they hook me up!

[redneck ohearn]

wheres double js at

[marshall]

m15, just south of hanes rd...thought you were from millington...?

[redneck ohearn]

i am but i live more toward clio and birchrun, i just never heard of double Js

[Ranger Dave]

they was one all ready started on them.

http://wegotmud.com/forum/index.php?topic=41343.0