water in oil??

[OHEARN.2012]

ok so i was tearing my 327 down the other night becuz i have to change some seals in it and i took out the oil plug and well by guessing i had like 2-3 cups of water run out before oil wat could cause this?

[Mudduck]

head gasket or cracked block or carb has sucked water from boggin or sitting out in the rain uncovered

[burl]

^^^ Yup ^^^ blown intake gasket also

[marshall]

were you getting sloppy in the teardown? i blow air thru the intake before removing, your water could of come from there? was the oil gray, or still seperate from the water?

[OHEARN.2012]

I was clean while doing it I drained oil before I took intake off it did Prolly suck water in the intake at last bog tho

[betterbeaters]

cracked heads?

[4x4xdodgeman]

you will not get that much water in the oil though the intake with the motor is running. if the motor goes under water not running you get alot of water in it.

[MR NASTY]

If you have upright headers they condensate this time of year from warm and cooling and then it runs right down.  Just a thought

[OHEARN.2012]

If you have upright headers they condensate this time of year from warm and cooling and then it runs right down.  Just a thought

headers were takin off late summer

[gator82]

head gasket or cracked block or carb has sucked water from boggin or sitting out in the rain uncovered

Was it water or antifreeze? Do you run straight water? it might help to boil it down to the culprit.

[OHEARN.2012]

ran straight water this summer no af

[Jjay78]

your intake gaskets ports match the sizes of your head and intake ports? bad head gasket? cracks?? or you go deep enough in hte water to get some in through your valve covers?

[OHEARN.2012]

Never had water over the hood always had rain caps on headers.  I'm going to be taking oil pan off this weekend and checking for any visible cracks.