need some help on a chain saw

Started by BigFrank, November 07, 2014, 09:44:41 PM

Previous topic - Next topic

BigFrank

i have a older  homelite xl  saw the thing wont stay running  ive changed the fuel filter in the tank air filter is good  it will fire up when I lock the throttle and half choke   it just sits there  and wont rev up when ya hit the throttle  then it will run great  as soon as I let off the throttle it pops and dies  then wont restart pull on it  and it has gas coming out the exhaust  any help is appreciated

84silverado

The fuel line might have a hole in it... That's what happened to my old one
if you can still see the color, you ain't muddin'
the joy of proving people wrong when they say you cant, will never get old

xjs3667

carb probably needs cleaned, carb gasket could be leaking also, as said hole in fuel line.... but if your getting raw gas out of exhaust, sounds like it might be a spark issue.... might need a new coil......
*Paying someone to install parts and bragging about it being fast, is like watching someone **** your wife and being proud to raise their kids.*

*Follow my Ruts, If you got the Nuts!!*

*People say I'm Crazy,....but ya know what... I say I'm crazy too!!*

BigFrank

hmmm  ive had the whole thing completely tore apart  ??? twice     the spark is strong     must be a fuel issue in the carb  the  line  is good soo I can eliminate that   I got 50.$$ into the saw and  I cut 3 pickup loads of wood  soo  I think its going too get put on the shelf and go buy a new saw   thanks for the input  ==wgm

Hammerlane

Fuel coming out the exhaust= stuck needle in the carb or
I had a main jet come unscrewed and end up in the bottom of the float bowl once... Bike ran, but ran like crap.
 

Over the Edge Sharpening systems, cutlery, shear, scissor sharpening

It's all fun and games till someone gets knocked up.. down or out !
Gone postal.. back in a minute!

BigFrank

Quote from: Hammerlane on November 09, 2014, 08:15:28 PM
Fuel coming out the exhaust= stuck needle in the carb or
I had a main jet come unscrewed and end up in the bottom of the float bowl once... Bike ran, but ran like crap.
hmm I will probably mess with it some  more  maybe on a day when I have more patience  lol

Swampthing

82 scrambler ,blazer frame ,small block.It runs everything from 33's-44's....83 cj7.full size chevy axles..48 inch terra tires.. 83 cj7... purple. 350 chevy toyota axles,37 inch boggers..have fun and keep the rubber side down.. Swampy


72 Bogger

drive like you stole it

xjs3667

*Paying someone to install parts and bragging about it being fast, is like watching someone **** your wife and being proud to raise their kids.*

*Follow my Ruts, If you got the Nuts!!*

*People say I'm Crazy,....but ya know what... I say I'm crazy too!!*

xjs3667

Quote from: extricator1 on November 30, 2014, 12:16:07 AM
Ya just meant valve issue but reed got pit in automatically via not so smart phone

well unfortunately..... your not so smart phone messed up again loll  ...... sense it dont have valves either
*Paying someone to install parts and bragging about it being fast, is like watching someone **** your wife and being proud to raise their kids.*

*Follow my Ruts, If you got the Nuts!!*

*People say I'm Crazy,....but ya know what... I say I'm crazy too!!*

old school truck dude

Sling it in the ditch and run over it with the rat phucker = fixed forever  ;D

newS10

 Need parts ??? I have 2 old xl saws i will sell for 30.00. u pick up in hartland mi. ??? ???

Powered by EzPortal