The Reject: Headed down the Road...

Started by ProGrade, January 03, 2010, 04:51:55 PM

Previous topic - Next topic

RIP_K52007

Quote from: professional grade on June 11, 2010, 10:53:09 AM
Quote from: lilred on June 10, 2010, 08:49:55 PM
I gotta find a boat tank, towbar' power steering line and get a orv sticker but ill try to make it out before work sunday.
sounds like you are about where i was last saturday. hope to see you out there.

are you going to be out there next sunday? i may hold off til then, i think this trucks probably only going to make it one day before its ==rip so id like to go out on a day i have off of work. It might run the rest of the year i dunno. i got it back after a figure 8.

ProGrade

I'll be out tomorrow, and then i'm taking the next couple weeks off out there.  I don't need that pump by the way, i got everything working. 
gmccchevv

RIP_K52007

oh ok, guys not droppin off the tires til next friday so im for sure not gnna be there with it this sunday. I need a power steering line.. totally forgot lol

ProGrade

Saturday I got the power steering working!  ==rocks Woohoo! got the hitch flipped and mounted (see pic), sealed up the intake, and let the kids paint the sides (hilarious).   ==roll Sunday I ran it at the mounds, had an oopsie  ==doh and tore some wires loose near the starter.  rigged it up and it ran pretty well the rest of the day. 

I need to take a BFH to the firewall for more tire clearance, need to wire in the ignition toggle, and push buttons for start and kill.  also need to add more engine wrap, and put a windshield in, hookup my front recovery point, and i think thats it for now.
gmccchevv

ProGrade

Quote from: lilred on June 14, 2010, 02:03:06 AM
oh ok, guys not droppin off the tires til next friday so im for sure not gnna be there with it this sunday. I need a power steering line.. totally forgot lol
might be going again this sunday, trying to convince my wife that her and i and our son need to do some wheelin since we arent going to have my daughter for fathers day.
gmccchevv

RIP_K52007


ProGrade

Quote from: lilred on June 21, 2010, 04:11:47 AM
didn't see ya out there the dodgee is done ==rip lol
yeah i was out there on the other side of the park when you toasted it apparently...i ran into cory after he got back from taking you home.
gmccchevv

ProGrade

saturday i found out my electrical issue was a loose connection to the starter solenoid, and i wired in the on/off toggle and push button start, also bent my linkage back so i have park again...
gmccchevv

ProGrade

I finally got the shredded 235/75/r15 removed from the factory 6 lug rim I have, and placed the 35/12.50/15 old bfg mtr on the rim for a spare. beats the heck out of that 31" spare i was carrying around, I also placed a cover over the intake opening above the hood to help protect it from any wild splashes.  now it looks more like a mobile home chimney then before ==roll I recruited Evan to wash the truck for me, and did some other minor work and rearranging.  I still need to get out the bfh for the firewall, have more engine shroud work to do, and need a windshield, however my ghetto patch seems to be holding up okay loll
gmccchevv

ProGrade

snapped my drivers side front leaf yesterday oops looks like we are going to bust the 2 digit budget.
gmccchevv

RIP_K52007

Quote from: professional grade on July 05, 2010, 03:38:30 PM
snapped my drivers side front leaf yesterday oops looks like we are going to bust the 2 digit budget.
==hmmm i may have one in whittemore, if you dont have one before i go up there again ill check. Free. lol

ProGrade

Quote from: lilred on July 05, 2010, 08:30:14 PM
Quote from: professional grade on July 05, 2010, 03:38:30 PM
snapped my drivers side front leaf yesterday oops looks like we are going to bust the 2 digit budget.
==hmmm i may have one in whittemore, if you dont have one before i go up there again ill check. Free. lol
sweet ==thanks let me know if you got one. I've got that cam for you by the way.
gmccchevv

ProGrade

#92
I found springs for cheap yeahh but now i can't get a hold of the guy, we will see.  Here's a pic of my broken spring, i'm going to pull it out tonight.  Last night I pulled out my ghetto patched windshield, (its really easy by the way!) I got it out while flipping steaks on the grill.  Tomorrow I am picking up a non busted one to replace it ==thanks J.C. 
gmccchevv

J.C.


ProGrade

gmccchevv

ProGrade

Soooo - I found that my driver's side u-joint for the wheel is gone, and so are the ears that hold it in on the inner and outer drivers side axle ==doh  ==censor I have an axle shaft arriving this evening, hopefully with everything i need except the u-joint itself. And I got springs that are bigger than the old ones, so they should hold up pretty good!  Now I just need the time to fix it loll
gmccchevv

BigFrank

i can see this truck turning into a monster  i goy some extra parts when ya need em   ==kp

ProGrade

Quote from: BigFrank on July 13, 2010, 02:31:20 AM
i can see this truck turning into a monster  i goy some extra parts when ya need em   ==kp
I'll keep that in mind...considering i've broken something 2 out of the 4 times i've had the truck out this year.

I got the parts i needed ==thanks to The Orange Mafia once again!!!  If you guys keep rescuing me, I'm going to have to paint my truck orange loll
gmccchevv

RIP_K52007

I'm going up to my storage location (aka my moms shed) tomorrow i'll dig around & see what i can find ya.

ProGrade

Driver's side spring is in, 3 leaf instead of 2.  i tore up one of the ubolts so I need to replace that.  Now the passenger side front spring and the drivers side inner and outer axle shaft need replaced and we are back in business.  I tried posting the pics a couple times but I keep getting a server error (and the size on the pics is good) My work computer sucks but I'll get them up soon.
gmccchevv

Powered by EzPortal