project RECOVERY ONE

Started by Kyle, March 15, 2010, 05:58:27 PM

Previous topic - Next topic

Kyle

Quote from: OHEARN.2012 on February 14, 2011, 03:40:32 AM
Quote from: Kyle on February 14, 2011, 03:31:07 AM
Quote from: Hitman89x on February 14, 2011, 03:26:23 AM
isnt most daimond plate aluminum?

most of it that ya find in stores yea. gotta go to a steel place or scrap yard to get it usually. like harbor steel
idk this stuff was like 40 bucks a suare foot

if its chrome, then its aluminum
92 chevy stepside - built 408 sbc/modified 700r4/14 bolt ff/dana 60/4.56s/38.5s/western 7.5' plow

==rf Gotta Get Dirty! Nothin' Else Matters! ==djdj

Hitman89x

its ususally polished alum. and yeah its pricey, look around on craigslist


forddgal forddd ==djdj got mud?


Kyle

got the new BDS springs and bushings in last night!  ;D
92 chevy stepside - built 408 sbc/modified 700r4/14 bolt ff/dana 60/4.56s/38.5s/western 7.5' plow

==rf Gotta Get Dirty! Nothin' Else Matters! ==djdj

Kyle

and the dune flags are back on it now! slowly but surely its gettin ready for copemish!  bandd
92 chevy stepside - built 408 sbc/modified 700r4/14 bolt ff/dana 60/4.56s/38.5s/western 7.5' plow

==rf Gotta Get Dirty! Nothin' Else Matters! ==djdj

84Chevy

What did triple a charge yah for that rope?
LIFT IT FAT CHICKS CANT JUMP

Its A Bad Ass Truck Thing You Wouldnt Understand!!

Kyle

Quote from: 84Chevy on February 15, 2011, 08:19:11 PM
What did triple a charge yah for that rope?

i got it as payment for pullin out a  fordd  ;D  ==rf
92 chevy stepside - built 408 sbc/modified 700r4/14 bolt ff/dana 60/4.56s/38.5s/western 7.5' plow

==rf Gotta Get Dirty! Nothin' Else Matters! ==djdj

Kyle

new bushings in the springs. who knew a hammer was so effective with pressing them in?? ready to go on the truck tommorow
92 chevy stepside - built 408 sbc/modified 700r4/14 bolt ff/dana 60/4.56s/38.5s/western 7.5' plow

==rf Gotta Get Dirty! Nothin' Else Matters! ==djdj

Kyle

well had some fun today. and got thrown for a loop at the same time. everything unbolted just fine for changing out the leaf springs. hardest part was gettin the new ones in tryin to feed it through the leaf spring topplate and the axle with the ubolts still on it. but it eventually got done without too many issues after i disconnected the front driveshaft. but when its at full droop, driveshaft no fit  pullhairr so now it aint capable enough to go to the dogparty tommorow, and i was looking foreward to it too!!  ==er

pic is of how bad the old leafs were. they had to go
92 chevy stepside - built 408 sbc/modified 700r4/14 bolt ff/dana 60/4.56s/38.5s/western 7.5' plow

==rf Gotta Get Dirty! Nothin' Else Matters! ==djdj

Hitman89x

lol  at first i thought pic was of new ones i was like O.o WTF? haha yeah those had to go!


forddgal forddd ==djdj got mud?


Kyle

Quote from: Hitman89x on February 19, 2011, 06:54:22 AM
lol  at first i thought pic was of new ones i was like O.o WTF? haha yeah those had to go!

i tried to get a pic of the new ones last night but it was just too damn dark for a good pic
92 chevy stepside - built 408 sbc/modified 700r4/14 bolt ff/dana 60/4.56s/38.5s/western 7.5' plow

==rf Gotta Get Dirty! Nothin' Else Matters! ==djdj

Kyle

heres what the new leafs look like.... i think thats a considerable difference
92 chevy stepside - built 408 sbc/modified 700r4/14 bolt ff/dana 60/4.56s/38.5s/western 7.5' plow

==rf Gotta Get Dirty! Nothin' Else Matters! ==djdj

Hitman89x



forddgal forddd ==djdj got mud?


BUDGETBOGGER03

BUDGET BOGGERS

OHEARN.2012

RBS Racing

i bog my bogger not my daily driver

built tough with chevy stuff

Listen Here Boy....I was slinging' mud before you were swimmin' round in your daddy's Nu* sack. Yankee Lake Trucks Gone Wild 2011

old school truck dude


Kyle

92 chevy stepside - built 408 sbc/modified 700r4/14 bolt ff/dana 60/4.56s/38.5s/western 7.5' plow

==rf Gotta Get Dirty! Nothin' Else Matters! ==djdj

OHEARN.2012

hey hows that 400 going?? and watcha getting mpg wise with those 410s and 35s??
RBS Racing

i bog my bogger not my daily driver

built tough with chevy stuff

Listen Here Boy....I was slinging' mud before you were swimmin' round in your daddy's Nu* sack. Yankee Lake Trucks Gone Wild 2011

Kyle

Quote from: OHEARN.2012 on February 23, 2011, 03:05:00 AM
hey hows that 400 going?? and watcha getting mpg wise with those 410s and 35s??

400 is still under the knife.... still waiting to get it back from the machine shop... SOON hopefully.

as for mpgs i think its about 14-16 on a good day, and about 8 flyin 90mph down the express way
92 chevy stepside - built 408 sbc/modified 700r4/14 bolt ff/dana 60/4.56s/38.5s/western 7.5' plow

==rf Gotta Get Dirty! Nothin' Else Matters! ==djdj

Hitman89x

Quote from: Kyle on February 23, 2011, 04:14:58 PM
Quote from: OHEARN.2012 on February 23, 2011, 03:05:00 AM
hey hows that 400 going?? and watcha getting mpg wise with those 410s and 35s??

400 is still under the knife.... still waiting to get it back from the machine shop... SOON hopefully.

as for mpgs i think its about 14-16 on a good day, and about 8 flyin 90mph down the express way

lol is it sad that thats pretty much what i got with my beefed up 6 cyl?> lol


forddgal forddd ==djdj got mud?


Kyle

Quote from: Hitman89x on February 23, 2011, 07:19:18 PM
Quote from: Kyle on February 23, 2011, 04:14:58 PM
Quote from: OHEARN.2012 on February 23, 2011, 03:05:00 AM
hey hows that 400 going?? and watcha getting mpg wise with those 410s and 35s??

400 is still under the knife.... still waiting to get it back from the machine shop... SOON hopefully.

as for mpgs i think its about 14-16 on a good day, and about 8 flyin 90mph down the express way

lol is it sad that thats pretty much what i got with my beefed up 6 cyl?> lol

chevv POWER!! ==roll
92 chevy stepside - built 408 sbc/modified 700r4/14 bolt ff/dana 60/4.56s/38.5s/western 7.5' plow

==rf Gotta Get Dirty! Nothin' Else Matters! ==djdj

Powered by EzPortal